A boxmodel development to study the relationships between the photo-oxidants and the particles formation in the troposphere

The model BAGS (Boxmodel for Aerosol and Gasphase Simulations) has been developed. It is composed of two major modules: the first one describes the system of the chemical reactions in the gaseous phase, the second one calculates the aerosol chemical composition and the dimensional distribution of the particles. The boxmodel has been developed with the introduction of new chemical and physical processes, not previously included, in particular the formation of Secondary Organic Aerosol. The other implemented processes are a module for the dynamic of the particle population, nucleation, coagulation and dry deposition. The last phase of the work has been a check of the BAGS capabilities by a series of tests, that have permitted to compare it with other models (MAPS and MADM). The tests in particular have concerned the aerosol water content prediction, the photochemistry, the condensation of the inorganic compounds and the formation of Secondary Organic Aerosol.     

Crystal structure of dicyclohexano-18-crown-6 potassium 2-nitrophenoxide

The first crystal structure of a potassium cation complex with dicyclohexano-18-crown-6 is reported. The potassium 2-nitrophenoxide complex ofsyn-cis-syn dicyclohexano-18-crown-6 crystallizes in the triclinic space group P with cell constantsa=8.604(2),b=10.772(4),C=16.123(5)Å, =73.86(3)°,=77.61(3)°, =82.68(3)° andZ=2 forD _c =1.31 g cm^–3. Least-squares refinement based on 2742 observed reflections led to a final conventionalR value of 0.040. Dicyclohexano-18-crown-6 has the shape of a saddle with the potassium cation sitting at the saddlepoint. The structure of the 2-nitrophenoxide anion is dominanted by the quinoid resonance contributor. Because the complex is devoid of significant intercomplex interactions, it is a prototypical 1:1:1 complex. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82043 (26 pages).Now Mrs. K. M. Balo.     

Vesicle adsorption and lipid bilayer formation on glass studied by atomic force microscopy

The adsorption of phosphatidylcholine (PC) vesicles (30, 50, and 100 nm nominal diameters) and of dye-labeled PC vesicles (labeled with 6% Texas Red fluorophore (TR) and encapsulated carboxy fluorescein (CF)) to glass surfaces was studied by contact mode atomic force microscopy in aqueous buffer. These studies were performed in part to unravel details of the previously observed isolated rupture of dye-labeled PC vesicles on glass (Johnson, J. M.; Ha, T.; Chu, S.; Boxer, S. G. Biophys. J. 2002, 83, 3371-3379), specifically to differentiate partial rupture, that is, pore formation and leakage of entrapped dye, from full rupture to form bilayer disks. In addition, the adhesion potential of PC vesicles on glass was calculated based upon the adhesion-driven flattening of adsorbed vesicles and a newly developed theoretical model. The vesicles were found to flatten considerably upon adsorption to glass (width-to-height ratio of approximately 5), which leads to an estimate for the adhesion potential and for the critical rupture radius of 1.5 x 10(-4) J/m2 and 250 nm, respectively. Independent of vesicle size and loading with dye molecules, the adsorption of intact vesicles was observed at all concentrations below a threshold concentration, above which the formation of smooth lipid bilayers occurred. In conjunction with previous work (Johnson, J. M.; Ha, T.; Chu, S.; Boxer, S. G. Biophys. J. 2002, 83, 3371-3379), these data show that 6% TR 20 mM CF vesicles adsorb to the surface intact but undergo partial rupture in which they exchange content with the external buffer.     

Laser desorption mass spectrometry on thin liquid jets

A recently developed soft desorption method for mass spectrometry is presented, which is called Laser Induced Liquid Beam Ionization/Desorption (LILBID). Analyte ions are desorbed from a thin jet of analyte solution directly into vacuum by means of an IR laser pulse, which has been tuned to a vibrational resonance of the solvent. A comparative experiment with ammonium chloride and aniline hydrochloride shows that ion formation via proton transfer takes place in the solution. Thermally unstable compounds, as well as supra- and biomolecular complexes, can be detected intact and mass analyzed in a reflectron time-of-flight (Re-TOF) mass spectrometer. During the desorption process, noncovalent interactions and some solvation characteristics are preserved. Three examples for the capacity of LILBID are given in this short overview: (a) ion-solvent interactions with the formation of a clathrate structure Cs⁺(H₂O)₂₀, (b) host-guest interactions with the K⁺ selectivity of valinomycin, and (c) noncovalent interactions with the dimerization of gramicidin. Received: 29 July 1997 / Revised: 4 September 1997 / Accepted: 12 September 1997     

Quantitative analysis of perchlorate in extracts of whole fish homogenates by ion chromatography: comparison of suppressed conductivity detection and electrospray ionization mass spectrometry

The perchlorate anion (ClO ₄ ^– ) is an anthropogenic contaminant of increasing concern in water supplies, and has been shown to disrupt thyroid activity. Most perchlorate analyses are currently carried out by ion chromatography (IC) with suppressed conductivity detection (SCD). While this procedure has been demonstrated to provide acceptable performance for analysis of water samples, the determination of perchlorate in high-conductivity aqueous extracts of plant or animal material is not readily accomplished by IC-SCD unless lengthy cleanup protocols are applied. With the addition of electrospray ionization mass spectrometry (ESI-MS) to IC, it was hypothesized that the interference imposed by various ionic species could be significantly reduced without the need for purification; however, the analysis of perchlorate in relatively unpurified extracts of biologically derived homogenates by IC-ESI-MS has not previously been described in the literature. The research presented here represents a comparison of the capabilities of IC-SCD and IC-ESI-MS to detect perchlorate in reagent water and in crude extracts of perchlorate-exposed fish (threespine stickleback, Gasterosteus aculeatus). ESI-MS was found to compare favorably to SCD for the detection of perchlorate in deionized water, and to exceed SCD performance in perchlorate analysis of fish-derived extracts.     

Electrode processes in the oxidation of tetrahydroisoquinoline derivatives

The electrochemical oxidation of the alkaloid laudanosine (Ia) to O-methylflavinantine (II) has been studied in acetonitrile solvent. Using cyclic voltammetry, rotating disc voltammetry and preparative electrolyses on several alkaloids, simple aliphatic amines and aromatic compounds, some aspects of the mechanism of this coupling reaction are elucidated. The first anodic wave for laudanosine at platinum has E_p=0.55 V vs. Ag/Ag⁺. The electrode rapidly becomes partially passivated at potentials above 0.5 V. This is due to a film which “dissolves” below 0.5 V, at a rate independent of the potential. It is shown that the reaction (Ia)→(II) proceeds at 0.5 V by initial oxidation of the amine moiety. If acids such as sodium bicarbonate are added to the anolyte the amine is protonated causing the first wave to disappear. Oxidation at 1.1 V under these acidic conditions produces the same product, but more rapidly and in significantly higher yield because electrode filming and side reactions resulting from the amine oxidation are abrogated.     

Reactions of Ru3(CO)12 with Diphosphenes — A New Route to 50‐Electron Ru3P2 nido‐Clusters

The reaction of the symmetric diphosphene 2, 4, 6‐(CF₃)₃‐C₆H₂‐P=P‐C₆H₂‐2, 4, 6‐(CF₃)₃ 4 with Ru₃(CO)₁₂ led to the 50‐electron Ru₃P₂ nido‐cluster Ru₃(CO)₉[μ‐P‐C₆H₂‐2, 4, 6‐(CF₃)₃]₂ 5 , which in solution at room temperature displays hindered rotation of the aromatic rings about the C(aryl)—P bonds. The structure of 5 was determined by X‐ray crystal structure analysis; its Ru₃P₂ centre forms a distorted square pyramid with one ruthenium atom at the apex. One of the two C₆H₂(CF₃)₃ groups is also appreciably distorted. Temperature‐dependent ¹⁹F NMR studies of the [A₃M₃X]₂ spin system (A = M = CF₃, X = ³¹P) of 5 indicated a rotational barrier ΔG^≠ of 82.3 kJ mol^‐1 at 141 °C. The same Ru₃P₂ core was obtained by the reaction of the unsymmetric diphosphene Mes*‐P=P‐Mes 11 with Ru₃(CO)₁₂; hindered rotation about the C(aryl)—P bonds was also observed, in this case.     

Ion excitation in a linear quadrupole ion trap with an added octopole field

Modeling of ion motion and experimental investigations of ion excitation in a linear quadrupole trap with a 4% added octopole field are described. The results are compared with those obtained with a conventional round rod set. Motion in the effective potential of the rod set can explain many of the observed phenomena. The frequencies of ion oscillation in the x and y directions shift with amplitude in opposite directions as the amplitudes of oscillation increase. Excitation profiles for ion fragmentation become asymmetric and in some cases show bistable behavior where the amplitude of oscillation suddenly jumps between high and low values with very small changes in excitation frequency. Experiments show these effects. Ions are injected into a linear trap, stored, isolated, excited for MS/MS, and then mass analyzed in a time-of-flight mass analyzer. Frequency shifts between the x and y motions are observed, and in some cases asymmetric excitation profiles and bistable behavior are observed. Higher MS/MS efficiencies are expected when an octopole field is added. MS/MS efficiencies (N(2) collision gas) have been measured for a conventional quadrupole rod set and a linear ion trap with a 4% added octopole field. Efficiencies are chemical compound dependent, but when an octopole field is added, efficiencies can be substantially higher than with a conventional rod set, particularly at pressures of 1.4 x 10(-4) torr or less.     

Acrylonitrile polymerization by Cy3PCuMe and (Bipy)2FeEt2

Cy(3)PCuMe (1) undergoes reversible ligand redistribution at low temperature in solution to form the tight ion pair [Cu(PCy(3))(2)][CuMe(2)] (3). The structure of 3 was assigned on the basis of (i) the stoichiometry of the 1 = 3 equilibrium, (ii) the observation of a triplet for the PCy(3) C1 (13)C NMR resonance due to virtual coupling to two (31)P nuclei, and (iii) reverse synthesis of 1 by combining separately generated Cu(PCy(3))(2)(+) and CuMe(2)(-) ions. Complex 1 and [Cu(PCy(3))(2)][PF(6)] (5) coordinate additional PCy(3) to form (Cy(3)P)(2)CuMe and [Cu(PCy(3))(3)][PF(6)], respectively, while 3 does not. Complex 1, free PCy(3), and (bipy)(2)FeEt(2) (2) each initiate the polymerization of acrylonitrile. In each case, the polyacrylonitrile contains branches that are characteristic of an anionic polymerization mechanism. The major initiator in acrylonitrile polymerization by 1 is PCy(3), which is liberated from 1. A transient iron hydride complex is proposed to initiate acrylonitrile polymerization by 2.     

Determination of Mn,Fe, Cu,Zn, and Pb in particulate matter,raw and final materials of a brick factory by radionuclide X-ray fluorescence analysis

Radionuclide X-ray fluorescence method with a Si/Li semiconductor detector and²³⁸Pn exciting source was used in the study of Mn, Fe, Cu, Zn, and Pb content of solid emissions, raw and final materials of a brick factory. From the point of view of metal content, the working environment of the brick factory is safe for workers.