Bead injection for surface enhanced Raman spectroscopy: automated on-line monitoring of substrate generation and application in quantitative analysis

The technique of bead injection has been adapted for surface enhanced Raman scattering (SERS) to substantially improve precision, long term stability and sensitivity of SERS detection in analytical chemistry. For this purpose a fully automated flow system comprising a dedicated flow-cell has been developed and tested. With the developed flow-cell, which contains two inlet and two outlet channels, it is possible to retain, perfuse and discharge minute amounts of polymer beads while monitoring all steps by Raman spectroscopy. First, beads carrying cation exchanger moieties were retained in the flow-cell and subsequently perfused with a silver nitrate and a hydroxylamine solution using one inlet of the flow cell. By this sequence homogeneous SERS active silver layers were formed on the beads. The uniformity of the achieved silver layer was studied by secondary electron microscopy. For measurement, the analyte was then introduced from the second inlet channel such that the interaction between the activated SERS beads and analyte occurred in close proximity and within the focus of the laser excitation beam. Due to the complete computer control of all experimental steps, including bead entrapment, SERS layer generation, sample introduction and final bead removal, highly reproducible conditions for SERS were achieved. The method was developed using 9-aminoacridine as a test molecule. Quantitative studies were carried out for 9-aminoacridine and acridine showing linear calibrations from 1-100 nmol l(-1) and 50-1,000 nmol l(-1), respectively, using a sample volume of 200 microl each. Typical relative standard deviations were 4.7% for 9-aminoacrine and 5.8% for acridine.     

The role of molecular shape in bilayer elasticity and phase behavior

A previously developed molecular level model for lipid bilayers [G. Brannigan and F. L. H. Brown, J. Chem. Phys. 120, 1059 (2004)] is extended to allow for variations in lipid length and simulations under constant surface tension conditions. The dependence of membrane elasticity on bilayer thickness is obtained by adjusting lipid length at constant temperature and surface tension. Additionally, bilayer fluidity at various lipid lengths is quantified by analysis of a length versus temperature phase diagram at vanishing tension. Regions of solid, gel-like (hexatic) and fluid bilayer behavior are established by identification of phase boundaries. The main melting transition is found to be density driven; the melting temperature scales inversely with lipid length since thermal expansion increases with lipid aspect ratio.     

Electrothermal vaporisation ICP-mass spectrometry (ETV-ICP-MS) for the determination and speciation of trace elements in solid samples - A review of real-life applications from the author's lab

The use of electrothermal vaporisation (ETV) from a graphite furnace as a means of sample introduction in inductively coupled plasma mass spectrometry (ICP-MS) permits the direct analysis of solid samples. A multi-step furnace temperature programme is used to separate the vaporisation of the target element(s) and of the matrix components from one another. Sometimes, a chemical modifier is used to enable a higher thermal pre-treatment temperature, by avoiding premature analyte losses (stabilisation) or promoting the selective volatilisation of matrix components. In almost all instances, accurate results can be obtained via external calibration or single standard addition using an aqueous standard solution. Absolute limits of detection are typically ~1 pg, which corresponds to 1 ng/g for a typical sample mass of 1 mg. Real-life applications carried out in the author's lab are used to illustrate the utility of this approach. These applications aim at trace element determination in industrial and environmental materials. The industrial materials analysed include different types of plastics - Carilon, polyethylene, poly(ethyleneterephtalate) and polyamide - and photo- and thermographic materials. As samples from environmental origin, plant material, animal tissue and sediments were investigated. Some applications aimed at a multi-element determination, while in other, the content of a single, but often challenging, element (e.g., Si or S) had to be measured. ETV-ICP-MS was also used in elemental speciation studies. Separation of Se-containing proteins was accomplished using polyacrylamide gel electrophoresis (PAGE). Subsequent quantification of the Se content in the protein spots was carried out using ETV-ICP-MS. As the volatilisation of methylmercury and inorganic mercury could be separated from one another with respect to time, no chromatographic or electrophoretic separation procedure was required, but ETV-ICP-MS as such sufficed for Hg speciation in fish tissue.     

CAROTENOID-TO-BACTERIOCHLOROPHYLL SINGLET ENERGY TRANSFER IN CAROTENOID-INCORPORATED B850 LIGHT-HARVESTING COMPLEXES OF Rhodobacter sphaeroides R-26.1

Four carotenoids, 3,4,7,8-tetrahydrospheroidene, 3,4,5,6-tetrahydrospheroidene, 3,4-dihydrospheroidene and spheroidene, have been incorporated into the B850 light-harvesting complex of the carotenoidless mutant, photosynthetic bacterium, Rhodobacter sphaeroides R-26.1. The extent of π-electron conjugation in these molecules increases from 7 to 10 carbon-carbon double bonds. Carotenoid-to-bacteriochlorophyll singlet state energy transfer efficiencies were measured using steady-state fluorescence excitation spectroscopy to be 54 ± 2%, 66 ± 4%, 71 ± 6% and 56 ± 3% for the carotenoid series. These results are discussed with respect to the position of the energy levels and the magnitude of spectral overlap between the S, (2′AJ state emission from the isolated carotenoids and the bacteriochlorophyll absorption of the native complex. These studies provide a systematic approach to exploring the effect of excited state energies, spectral overlap and excited state lifetimes on the efficiencies of carotenoid-to-bacteriochlorophyll singlet energy transfer in photosynthetic systems.     

Phenylated polyimides: Diels-Alder reaction of biscyclopentadienones with dimaleimides

A series of phenylated polydihydrophthalimides has been synthesized by the Diels-Alder reactions of 3,3′-(oxydi-p-phenylene)bis(2,4,5-triphenylcyclopentadienone) and 3,3′-(p-phenylene)bis(2,4,5-triphenylcyclopentadienone) with N,N′-o-, -m-, and -p-phenylenedimaleimide. The polydihydrophthalimides were soluble in dimethylformamide (DMF) and had intrinsic viscosities that ranged from 0.33 to 1.01, the polymers were dehydrogenated thermally and chemically to afford the corresponding phenylated polyphthalimides. The totally aromatic polyimides were also soluble in DMF but had intrinsic viscosities only as high as 0.41. The thermogravimetric analyses of the polyphthalimides showed breaks near 530°C in air and in nitrogen atmospheres.     

A note on packing paths in planar graphs

Seymour (1981) proved that the cut criterion is necessary and sufficient for the solvability of the edge-disjoint paths problem when the union of the supply graph and the demand graph is planar and Eulerian. When only planarity is required, Middendorf and Pfeiffer (1993) proved the problem to be NP-complete. For this case, Korach and Penn (1992) proved that the cut criterion is sufficient for the existence of a near-complete packing of paths. Here we generalize this result by showing how a natural strengthening of the cut criterion yields better packings of paths.Analogously to Seymour's approach, we actually prove a theorem on packing cuts in an arbitrary graph and then the planar edge-disjoint paths case is obtained by planar dualization. The main result is derived from a theorem of Seb (1990) on the structure of ±1 weightings of a bipartite graph with no negative circuits.Research partially supported by the Hungarian National Foundation for Scientific Research Grants OTKA 2118 and 4271.     

A Heuristic Decomposition Algorithm for Scheduling Problems on Mixed Graphs

We consider a scheduling problem where a set of n jobs has to be processed on a set of m machines and arbitrary precedence constraints between operations are given. Moreover, for any two operations i and j values a _ij >0 and a _ji >0 may be given where a _ij is the minimal difference between the starting times of operations i and j when operation i is processed first. Often, the objective is to minimize the makespan but we consider also arbitrary regular criteria. Even the special cases of the classical job shop problem J//C_max belong to the set of NP-hard problems. Therefore, approximation or heuristic algorithms are necessary to handle large-dimension problems. Based on the mixed graph model we give a heuristic decomposition algorithm for such a problem, i.e. the initial problem is partitioned into subproblems that can be solved exactly or approximately with a small error bound. These subproblems are obtained by a relaxation of a subset of the set of undirected edges of the mixed graph. The subproblems are successively solved and a proportion of the results obtained for one subproblem is kept for further subproblem definitions. Numerical results of the algorithm presented here are given.     

Signals of left-right supersymmetry ine + e − collisions

We study chargino and neutralino pair production at the Next Linear e⁺ e⁻ Collider in a supersymmetric left-right model. We investigateon- and off-resonance signals via the processes: and . These reactions could lead to observable signals as they compare with the background signal from W^± -pair production.     

Dynamic structure factor in a random diffusion model

Let {X _t:0} denote random walk in the random waiting time model, i.e., simple random walk with jump ratew ^–1(X _t), where {w(x):x^d} is an i.i.d. random field. We show that (under some mild conditions) theintermediate scattering function F(q,t)=E ₀ (q^d) is completely monotonic int (E ₀ denotes double expectation w.r.t. walk and field). We also show that thedynamic structure factor S(q, w)=2 ₀ cos(t)F(q, t) exists for 0 and is strictly positive. Ind=1, 2 it diverges as 1/||^1/2, resp. –ln(||), in the limit 0; ind3 its limit value is strictly larger than expected from hydrodynamics. This and further results support the conclusion that the hydrodynamic region is limited to smallq and small such that ||D |q|², whereD is the diffusion constant.     

Structural phase transitions in ‘hcp’ C70 single-crystals

The thermal expansion of vapor-grownC ₇₀ single crystals ahs been investigated using high-resolution capacitance dilatometry from 5–380 K. Measurements were made both parallel and perpendicular to the hexagonalc-axis. Three first-order phase transitions which we associate with the consecutive disordering of theC ₇₀ molecules are observed upon heating at 280 K (long-axis spinning), 300 K (long-axis precession) and 355 K (quasi-free rotation), respectively. The highest-temperature transition exhibits a very large (50 K) thermal hysteresis. Powder and single-crystal X-ray diffraction show that the crystals are predominantly hexagonal-close-packed (HCP) with an idealc/a1.63 above 360 K andc/a1.84 at 295 K.