Low temperature absorption spectra of TcO 4 − and ReO 4 − in KClO4

The low temperature spectra of TcO ₄ ^– and ReO ₄ ^– both show two band systems with pronounced vibrational structures. The bands are identified as¹ A ₁¹ T ₂ transitions. No other bands are observed with certainty. It seems likely that the KClO₄ crystals contain KReO₄ crystallites. They are therefore not pure mixed crystals. It is concluded that the virtual orbital (2e) used in the construction of the low lying states resembles an atomic nd orbital more and more when going from n=3, Mn to n=5, Re.

---

Zusammenfassung Die Tieftemperaturspektren von TcO ₄ ^– und ReO ₄ ^– zeigen beide zwei Bandensysteme mit ausgeprägten Schwingungsstrukturen. Die Banden werden als ¹ A ₁¹ T ₂-Übergänge identifiziert. Keine anderen Banden werden mit Sicherheit beobachtet. Es scheint wahrscheinlich, daß die KClO₄-Kristalle KReO₄-Kristallite enthalten und deswegen keine reinen Mischkristalle sind. Es wird geschlossen, daß das virtuelle Orbital (2e), welches zur Konstruktion der tiefliegenden Zustände gebraucht wird, in der Reihe n=3, Mn bis n=5, Re immer weitgehender einem nd-Atomorbital ähnelt.

---

---

Nachwuchsstipendiat, Schweizerischer Nationalfonds.     

Phenylated polyimides: Diels-Alder reaction of biscyclopentadienones with dimaleimides

A series of phenylated polydihydrophthalimides has been synthesized by the Diels-Alder reactions of 3,3′-(oxydi-p-phenylene)bis(2,4,5-triphenylcyclopentadienone) and 3,3′-(p-phenylene)bis(2,4,5-triphenylcyclopentadienone) with N,N′-o-, -m-, and -p-phenylenedimaleimide. The polydihydrophthalimides were soluble in dimethylformamide (DMF) and had intrinsic viscosities that ranged from 0.33 to 1.01, the polymers were dehydrogenated thermally and chemically to afford the corresponding phenylated polyphthalimides. The totally aromatic polyimides were also soluble in DMF but had intrinsic viscosities only as high as 0.41. The thermogravimetric analyses of the polyphthalimides showed breaks near 530°C in air and in nitrogen atmospheres.     

Neue Näherungsgleichung zur einheitlichen Berechnung von Wärmeübertragern

Zusammenfassung Es wird eine für alle Stromführungen einheitliche Näherungsgleichung mit drei oder vier anpaßbaren Parametern zur Berechnung des Korrekturfaktors für die mittlere logarithmische Temperaturdifferenz angegeben. Die anpaßbaren Parameter wurden für etwa 50 verschiedene Stromführungen durch Ausgleichsrechnung bestimmt. Die Genauigkeit der Gleichung ist für die Berechnung im praktisch wichtigen Bereich mehr als ausreichend.

---

New approximate equation for uniform heat exchanger design

An approximate equation with three or four empirical parameters for the uniform calculation of the LMTD-correction factor of all heat exchanger configurations is proposed. The empirical parameters have been determined for about 50 different flow configurations using least squares estimation. The accuracy of the equation is more than sufficient for practical design purposes.

---

Formelzeichen A Übertragungsfläche - a, b, c, d Parameter der Näherungsgleichung - Wärmekapazitätsstrom - F Korrekturfaktor für die logarithmische mittlere Temperaturdifferenz - k Wärmedurchgangskoeffizient - m, n Zahl der Durchgänge oder Einzelapparate - NTU Anzahl der Übertragungseinheiten (number of transfer units); NTU_i=kA/ _i - P dimensionslose Temperaturänderung - R Wärmekapazitätsstromverhältnis;R ₁=₁/₂;R ₂=₂/₁ - relativer Fehler - Mittelwert von NTU₁ und NTU₂ Indizes 1, 2 Stoffstrom 1, 2 - G Gegenstrom - s Schätzwert Herrn Prof. Dr.-Ing. E.h. K. Stephan zum 65. Geburtstag gewidmet.     

The nature of the C-defects in nickel and their rôle in the interpretation of radiation damage in metals

In previous Perturbed-Angular-Correlation (PAC) studies of the - emission of ¹¹¹In probe nuclei in cold-worked or particle-irradiated nickel, it has been found that thermal annealing in the temperature regime of recovery stage III leads to the formation of so-called C-defects (Cubic defects). This is indicated by the occurrence of a new frequency of about 80 Mrad/s, in addition to the frequency (200 Mrad/s) that is due to ¹¹¹In on substitutional sites. Obviously, the C-defects are complexes consisting of ¹¹¹In and the intrinsic point-defect species that migrates freely in recovery stage III. Therefore, they have played an important rôle in the long-standing controversy on whether the recovery-stage-III defects are vacancies (one-interstitial model) or self-interstitials (two-interstitial model). The present paper reports on a novel experimental effort to reveal the nature of the C-defects by combining PAC studies on nickel samples differently pretreated in a systematic way, investigations of the Extended X-ray Absorption Fine Structure (EXAFS) on In-doped nickel, and measurements of the decay rate of ¹¹¹In nuclei in the Electron-Capture-Induced Decay (ECID). On the basis of the results of these experiments it is concluded that the defects trapped by substitutional ¹¹¹In atoms (In_s) in recovery stage III are self-interstitials (I), as expected according to the two-interstitial model. Moreover, there is evidence that the C-defects are In interstitials on tetrahedral sites (In_i) that form exclusively in the vicinity of the specimen surface from In_s – I pairs via the reaction In_s+I In_i.     

Particle directionality and trapped proton fluences on LDEF

Directionality of incident space radiation is a significant factor in spacecraft shielding and astronaut dosimetry in low Earth orbit (LEO). Particle directionality of GCR and trapped protons were measured on LDEF with plastic nuclear track detectors (PNTD) from the P0006 west-side experiment. This experiment consisted of a thick detector stack and is described more fully in a companion article (Benton et al., 1996). The anisotropy of the trapped protons produced maximum intensity for protons arriving from the west. The fluences of the eastward directed trapped protons have been measured by selection of the particles on the basis of range in the PNTDs. The measured fluences are compared with the model calculations of Armstrong and Colborn (1993).     

On two methods of determining the ellipses and ellipsoids of positioning accuracy of robot manipulators

Summary When analysing the problem of the positioning accuracy of robot manipulators it is important to know how far random deviations of the hand may be from the desired position if the joint positioning errors possess a normal distribution. Two methods of determining the ellipses and ellipsoids of probability concentration are compared. The first of them is based on the standard procedure of the probability calculus. The second approximate method consists in finding at first the polygon or polyhedron of the positioning accuracy, and then in finding the ellipse or ellipsoid with principal axes and second order moments coinciding with those of the polygon or polyhedron, respectively. Examples of application demonstrate that these two methods give very close results.

---

Zwei Methoden zur Bestimmung der Ellipsen und Ellipsoide der Positioniergenauigkeit von Handhabungsrobotern

Übersicht Bei der Untersuchung der Positioniergenauigkeit von Handhabungsrobotern ist es wichtig, die Größe zufälliger Abweichungen des Greifers von der erstrebten Position zu kennen, wenn die Lagefehler der Verbindungen eine Normalverteilung besitzen. Es werden zwei Methoden zur Bestimmung der Ellipsen bzw. Ellipsoide der Wahrscheinlichkeitsdichte verglichen. Die erste beruht auf dem Standardverfahren der Wahrscheinlichkeitsrechnung. Die zweite Näherungsmethode besteht darin, daß zunächst das Polygon bzw. Polyeder der Positioniergenauigkeit bestimmt wird und danach die Ellipse bzw. das Ellipsoid mit den Hauptachsen und Momenten zweiter Ordnung wie das Polygon oder Polyeder. Beispiele zeigen, daß beide Methoden zu sehr ähnlichen Ergebnissen führen.

     

Computer controlled spreading resistance system for measurement of carrier concentration profiles of silicon structures

A new computer controlled equipment for carrier concentration profile determination of silicon structures by a spreading resistance technique is presented. The required data and plots can easily be obtained by means of a new software package, which has been specially developed for this purpose. Measurements have been performed on different structures in order to verify the suitability of both the measuring system and the software package. The reproducibility has been found to be within 5% for the investigated structures.