Importance of the diamine reactant in the production of polyphosphonamides by the interfacial technique

The stirred interfacial polycondensation of phenylphosphonic dichloride and 1,6-hexanediamine has been studied as a function of several reaction variables. The reaction is rapid, being completed in less than 1 min. When organic solvent is varied and reactant molar ratio is varied with an excess of the acid chloride, yield is constant. When reactant molar ratio is varied polymer yield increases with increase in amine concentration. When reactant concentration is increased yield increases. With the addition of a soluble salt in the aqueous phase yield is increased. The above indicates that the diffusion of the amine to the reaction zone is of primary importance in determining polymerization rate and that the diffusion of the acid chloride is relatively unimportant. Polymer yield was found to be dependent on the pH of the amine in the aqueous phase. The observed trend is related to the apparent solubility of the amine in the aqueous phase such that the greater the apparent solubility of the amine, the less the polymer yield. Polymer molecular weight is found to be independent of reaction variables tested. Polymer was also formed from the condensation of phenylphosphonic dichloride with p-phenylenediamine, H₂N-D-NH₂ (where D is a 36-carbon hydrocarbon chain), 1,3-di-4-piperidylpropane, and 4-aminomethylpiperidine; phenyl phosphorodichloridate with 1,6-hexanediamine; chloromethyl phosphonic dichloride with 1,6-hexanediamine.     

A re-statement of the Hohenberg–Kohn theorem and its extension to finite subspaces

Bearing in mind the insight into the Hohenberg–Kohn theorem for Coulomb systems provided recently by Kryachko (Int J Quantum Chem 103:818, 2005), we present a re-statement of this theorem through an elaboration on Lieb’s proof as well as an extension of this theorem to finite subspaces. Contribution to the Serafin Fraga Memorial Issue.     

Counterion Exchange Selectivity in Detergent–Polymer Aggregates

In aqueous solution, the interaction between sodium dodecyl sulfate (SDS) and poly(ethylene glycol) (PEG) results in the formation of small aggregates or clusters of SDS attached to the PEG polymer chain. Selectivity coefficients for exchange of two monovalent (N-methyl-4-cyanopyridinium cation and Tl⁺) and two divalent (methylviologen cation and Cu²⁺) counterions at the surface of SDS–PEG clusters, determined employing photophysical techniques, are similar, but not identical, to those for exchange at the surface of SDS micelles in the absence of PEG. The principal factor affecting ion exchange selectivity in SDS–PEG clusters does not appear to be aggregate size or surface charge density but rather the presence of poly(oxyethylene) subunits at the aggregate surface.     

Mössbauer and molecular orbital study of the myoglobin-CO complex

Experimental Mössbauer spectra of the Fe⁵⁷-enriched CO complex of sperm whale myoglobin (MbCO) at T= 4.2 K with and without applied magnetic field (H⊥γ) were measured to derive the sign of the electric field gradient (EFG), the quadrupole splitting ΔE _Q, and the isomer shift δ of the heme iron. We find a positive EFG, δE _Q = 0.363 mm/sec, and δ + 0.266 mm/sec. Molecular orbital calculations were carried out to obtain theoretical estimates of EFG and ΔE _Q for several steric arrangements of the CO ligand relative to the heme group. Our results are most consistent with the conclusion that the iron is situated in the heme plane, and that a bent geometry with a Fe-C-O angle of about 135 ° is more favorable than a more symmetric structure with a linear Fe-C-O geometry.     

Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

The catalyst used in fluidized catalytic cracking (FCC) units of refineries after several recovery cycles in regeneration units, reduces its activity and it is partially substituted by new catalyst in the process. As it has a high silicon and aluminum oxides content, the pozzolanic properties of a Brazilian FCC spent residual catalyst, used in different substitution degrees to cement, were evaluated by three thermal analysis techniques during the early stages of hydration of a type II Portland cement. NCDTA curves show in real time that the residual catalyst, accelerates the stages of cement hydration. TG and DSC curves of respective pastes after 24 h of hydration evidence the pozzolanic activity of the waste, respectively, by the lower water mass loss during the dehydroxylation of the residual calcium hydroxide and by the lower dehydroxylation endothermal effect. Within the analyzed period, the higher is the cement substitution degree, the higher is the pozzolanic activity of the residual catalyst.     

Sorption behavior of Co(II) on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the presence of humic acid

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The extent of sorption of divalent metal cations is controlled by a number of factors including cosorbing or complexing. In this work, the effects of pH, humic acid HA/Co(II) addition orders, ionic strength, concentration of HA, and foreign cations on the Co(II) sorption on γ-Al₂O₃ in the presence of HA were investigated. The sorption isotherms of Co(II) on γ-Al₂O₃ in the absence and presence HA were also studied and described by using S-type sorption model. The experimental results showed that the Co(II) sorption is strongly dependent on the pH values, concentration of HA, but independent of HA/Co(II) addition orders, ionic strength, and foreign cations in the presence of HA under our experimental conditions. The results also indicated that HA enhanced the Co(II) sorption at low pH, but reduced the Co(II) sorption at high pH. It was hypothesized that the significantly positive influence of HA at low pH on the Co(II) sorption on γ-Al₂O₃ was attributed to strong surface binding of HA on γ-Al₂O₃ and subsequently the formation of ternary surface complexes such as ≡S-OOC-R-(COO⁻) _x Co^2−x . Chemi-complexation may be the main mechanism of the Co(II) sorption on γ-Al₂O₃ in the presence of HA.     

Theoretical evidence for the singlet diradical character of square planar nickel complexes containing two o-semiquinonato type ligands

Density functional theory and complete active space self-consistent field computations are applied to elucidate the singlet diradical character of square planar, diamagnetic nickel complexes that contain two bidentate ligands derived from o-catecholates, o-phenylenediamines, o-benzodithiolates, o-aminophenolates, and o-aminothiophenolates. In the density functional framework, the singlet diradical character is discussed within the broken symmetry formalism. The singlet-triplet energy gaps, the energy gained from symmetry breaking, the spin distribution in the lowest triplet state, and the form of the magnetic orbitals are applied as indicators for the singlet diradical character. Moreover, a new index for the diradical character is proposed that is based on symmetry breaking. All symmetry breaking criteria show that the complexes obtained from o-catecholates and o-benzodithiolates have the largest and the smallest singlet diradical character, respectively. The singlet diradical character should be intermediate for the complexes derived from o-phenylenediamines, o-aminophenolates, and o-aminothiophenolates. The diradical character of all complexes suggests the presence of Ni(II) central atoms. This is also indicated by the d-populations computed by means of the natural population analysis.     

Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Borate adsorption at Pt(111) in acidic medium

The adsorption/desorption process of borate was studied at Pt(111) in acidic solution by cyclic voltammetry. A so-called butterfly wave in the cyclic voltammogram of Pt(111) in HClO₄ shifted to negative direction upon the addition of boric acid with the disappearance of its sharp spikes. The shift in potential was found to be −57 mV with a tenfold increase of boric acid concentration. This illustrates that this anomalous wave is due to borate adsorption/desorption by a one-electron transfer process. The borate adsorption/desorption wave was observed to shift by −63 mV/pH. At pH>3, the anomalous wave splits forming two separate waves, depending on the pH and the scan rate. The appearance of two waves is assigned to the change in the adsorption mode of borate or the participation of OH in the adsorption process.