Determination of Bitterness of Extra Virgin Olive Oils by Amperometric Detection

A flow injection system with amperometric detection at potentials poised at +0.4 and +0.9 V was used to evaluate intensity of the bitter taste in monovarietal Extra Virgin Olive Oils (EVOO). Results from the proposed method were based on the extraction of the bitter constituents of the virgin olive oil samples in methanol‐water, followed by the direct amperometric measurement. These potentials were selected according to the hydrodynamic voltammogram of oleuropein, one of the most prominent and bitter phenolic compound found in EVOO. The amperometric detection was applied on 32 monovariatal EVOO samples. Results were correlated with the phenolic profile measured by high performance liquid chromatography (HPLC). The amperometric signal at +0.9 V mainly correlated with the total phenols of the samples (R²=0.81), whereas the signal at +0.4 V mainly correlated with oleuropein aglycone (3,4 DHPEA‐EDA, R²=0.79). Bitterness intensity of the samples was evaluated by a trained sensory panel of experts and the results compared to those obtained by the amperometric flow system. The best correlation with the bitter taste was achieved by the sensor at +0.4 V (R²=0.72). A calibration model based on partial least squares was built with three variables, namely the sensors set at +0.4 and +0.9 V and the total phenol content of the EVOO extracts. The model showed a moderate capacity to predict the bitterness of the EVOO samples using leave one out method, (R²=0.75) and in prediction of a test set of samples (R²=0.7). Such approach is very promising for future studies.     

Reactivity of a phosphinito-bridged PtI-PtI complex with nucleophiles: substitution versus addition

As a result of the strong electrophilic character of the Pt bound to O, the phosphinito-bridged PtI complex [(PHCy2)Pt(micro-PCy2){kappa2P,O-micro-P(O)Cy2}Pt(PHCy2)](Pt-Pt) (1) undergoes attack at the O-bound Pt atom by molecules such as di- and tricyclohexylphosphane, dicyclohexylphosphane oxide, and dicyclohexylphosphane sulfide. Thus, reaction of 1 with PHCy2 gives the symmetric PtI dimer [(PHCy2)Pt(micro-PCy2)]2(Pt-Pt) (2), while the hydrido-bridged complex syn-[(PHCy2){kappaP-P(O)Cy2}Pt(micro-PCy2)(micro-H)Pt(PHCy2){kappaP-P(O)Cy2}](Pt-Pt) (4) is obtained from reaction of 1 with P(O)HCy2; the thiophosphinito complex [(PHCy2)Pt(micro-PCy2){kappa2P,S-micro-P(S)Cy2}Pt(PHCy2)](Pt-Pt) (8) forms selectively in reaction of 1 with P(S)HCy2. For comparison, the reaction with PCy3 results only in ligand substitution, affording [(PCy3)Pt(micro-PCy2){kappa2P,O-micro-P(O)Cy2}Pt(PHCy2)](Pt-Pt) (5). DFT studies confirmed the remarkable electrophilicity of the oxygen-bound Pt and shed light on the nature of the metal-metal bond in Pt dimers.     

Structure and emission properties of Er3Q9 (Q = 8-quinolinolate)

We report the first combined optical and structural investigation of the water free Er-quinolinolate complex, an organo-lanthanide system of interest for 1.5-microm telecom applications. Structural data demonstrate that the complex has a trinuclear structure (Er3Q9) which provides the Er metals with an octa-coordination by the organic ligand and prevents solvent and water molecules from entering the lanthanide coordination sphere. The results of the structural analysis allow us to infer that the strong Er luminescence quenching exhibited by the Er3Q9 complex is due uniquely to resonant energy transfer to the aromatic C-H vibrations of the ligand, providing the correct tools to design more efficient emitters.     

Bloch and normal functions and their relation

Following a brief introduction to Bloch and normal functions, several conditions, including a convergence theorem, are shown for determining them. In addition, since an exponential of any constant multiple of a Bloch function is always normal, we investigate whether or not the converse holds, and construct an example of a non-Bloch function such that the exponential of any constant multiple of it is normal.     

Biodeterioration of Paper: A SEM Study of Fungal Spoilage Reproduced Under Controlled Conditions

Biodeterioration phenomena represent a complex of physical and chemical alteration processes in various materials, such as those constituting the objects that represent our cultural heritage. The biodegradation of paper is conditioned by several variables such as the materials from which cellulose is obtained, the manufacturing processes employed, the occurrence of other affecting substances such as lignin or metallic compounds, and by the environmental conditions in which papers are conserved. In this study, biodeterioration of paper was artificially induced in order to evaluate the role of a range of chemical and physical variables on damage caused by cellulolytic fungi. A variable pressure SEM instrument was used to characterise paper samples with different fibre origins, and alterations obtained in vitro. Two fungal strains, Aspergillus terreus Thom and Chaetomium globosum Kunze, which are cellulolytic species frequently associated with paper spoilage, were used to produce stains with characteristics close to those observable on art objects made from paper. The stains obtained on the different samples of paper were compared at both low and high magnification, in order to visualize the macro- and microscopic characteristics of paper fibres, inorganic constituents, impurities, and the deteriorating agents related to the spoiled areas. During this survey it was observed that single paper characteristics can strongly influence the intensity and the results of the fungal action. For example, the activity of a fungal strain on paper grades containing fibres of the same origin, but with different sizing, led to the formation of profoundly different stains and alterations. Moreover fungal structures, analysed by low vacuum SEM, in areas on paper corresponding to the stains appeared in different physiological states suggesting an important effect of paper constituents on fungal growth and their sporulating ability.     

Portable X-ray fluorescence device reveals the artistic palette of Carlo Bononi,Baroque artist from Ferrara

The principal aim of the in situ X-ray fluorescence (XRF) analysis on the canvas “The Coronation of the Virgin” was to characterise the colour palette of Carlo Bononi (Ferrara, 1580–1632), a lesser-known artist of the early Baroque period in Ferrara. More than 100 points were collected by means of an XRF spectrometer, but the presence of many overlapping painted layers left some doubts about the preparation and the background layers. The scanning electron microscopy with energy dispersive spectrometer analysis on two samples resolved some of these doubts. The results obtained indicate the use of typical 17th century pigments, such as lead white, vermilion, azurite and a copper-based green. For yellow pigments, the artist used the yellow ochre in some cases, while in others he used lead-tin yellow. We also individuated at least three different shades of umber. Almost all the pigments have been identified and they are the first step in establishing the technical apparatus necessary to understand the modus operandi of the Ferrarese artist.     

De Novo Design,Synthesis and Characterisation of MP3, A New Catalytic Four‐Helix Bundle Hemeprotein

A new artificial metalloenzyme, MP3 (MiniPeroxidase 3), designed by combining the excellent structural properties of four‐helix bundle protein scaffolds with the activity of natural peroxidases, was synthesised and characterised. This new hemeprotein model was developed by covalently linking the deuteroporphyrin to two peptide chains of different compositions to obtain an asymmetric helix–loop–helix/heme/helix–loop–helix sandwich arrangement, characterised by 1) a His residue on one chain that acts as an axial ligand to the iron ion; 2) a vacant distal site that is able to accommodate exogenous ligands or substrates; and 3) an Arg residue in the distal site that should assist in hydrogen peroxide activation to give an HRP‐like catalytic process. MP3 was synthesised and characterised as its iron complex. CD measurements revealed the high helix‐forming propensity of the peptide, confirming the appropriateness of the model procedure; UV/Vis, MCD and EPR experiments gave insights into the coordination geometry and the spin state of the metal. Kinetic experiments showed that Fe^III–MP3 possesses peroxidase‐like activity comparable to R38A–hHRP, highlighting the possibility of mimicking the functional features of natural enzymes. The synergistic application of de novo design methods, synthetic procedures, and spectroscopic characterisation, described herein, demonstrates a method by which to implement and optimise catalytic activity for an enzyme mimetic.