The Influence of Activating Co and Ni Additions on the Mechanisms of Reaction and Diffusion Interaction During Sintering of PV-N55Т45 TiNi-Based Powders

Russian Physics Journal - An investigation of the influence of reaction- and diffusion-induced interactions in the system of PV-N55Т45 TiNi-based powders and activating Co and Ni additions...     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.     

Linear polarization scans for resonant X‐ray diffraction with a double‐phase‐plate configuration

An in‐vacuum double‐phase‐plate diffractometer for performing polarization scans combined with resonant X‐ray diffraction experiments is presented. The use of two phase plates enables the correction of some of the aberration effects owing to the divergence of the beam and its energy spread. A higher rate of rotated polarization is thus obtained in comparison with a system with only a single retarder. Consequently, thinner phase plates can be used to obtain the required rotated polarization rate. These results are particularly interesting for applications at low energy (e.g. 4 keV) where the absorption owing to the phase plate(s) plays a key role in the feasibility of these experiments. Measurements by means of polarization scans at the uranium M₄ edge on UO₂ enable the contributions of the magnetic and quadrupole ordering in the material to be disentangled.     

Nickel deposition on γ-Al2O3 model catalysts: An experimental and theoretical investigation

Recently, surface modifications on a commercial Ni/γ-Al₂O₃ catalyst during the production of methane from synthesis gas were investigated by quasi insitu X-ray photoelectron spectroscopy (XPS) [I. Czekaj, F. Loviat, F. Raimondi, J. Wambach, S. Biollaz, A. Wokaun, Appl. Catal. A: Gen. 329 (2007) 68]. The conclusion was that the reactivity and the observed reaction mechanisms on the different Ni particles are influenced directly by both the size and the composition of the particles on the γ-Al₂O₃ support.In this investigation, Ni deposition and cluster growth on model catalyst samples (10 nm thick, polycrystalline γ-Al₂O₃ on Si(100)) were investigated by XPS. Several steps in the binding energy during Ni deposition indicate changes in the cluster growth. The molecular structure of the catalyst was investigated using Density Functional Theory calculations (StoBe) with a cluster model and non-local functional (RPBE) approach. An Al₁₅O₄₀H₃₅ cluster was selected to represent the γ-Al₂O₃(100) surface. Ni clusters of different size were cut from a Ni(100) surface and deposited on the Al₁₅O₄₀H₃₅ cluster in order to validate the deposition model determined by XPS.     

CN− secondary ions form by recombination as demonstrated using multi-isotope mass spectrometry of 13C- and 15N-labeled polyglycine

We have studied the mechanism of formation CN- secondary ions under Cs+ primary ion bombardment. We have synthesized 13C and 15N labeled polyglycine samples with the distance between the two labels and the local atomic environment of the 13C label systematically varied. We have measured four masses in parallel: 12C, 13C, and two of 12C14N, 13C14N, 12C15N, and 13C15N. We have calculated the 13C/12C isotope ratio, and the different combinations of the CN isotope ratios (27CN/26CN, 28CN/27CN, and 28CN/26CN). We have measured a high 13C15N- secondary ion current from the 13C and 15N labeled polyglycines, even when the 13C and 15N labels are separated. By comparing the magnitude of the varied combinations of isotope ratios among the samples with different labeling positions, we conclude the following: CN- formation is in large fraction due to recombination of C and N; the CO double bond decreases the extent of CN- formation compared to the case where carbon is singly bonded to two hydrogen atoms; and double-labeling with 13C and 15N allows us to detect with high sensitivity the molecular ion 13C15N-.     

Dynamics of Arabidopsis thaliana soluble proteome in response to different nutrient culture conditions

In an effort to determine the best extraction procedure compatible with the high-reproducible 2-DE, different methods of soluble protein extraction from Arabidopsis cell culture suspensions grown in Gamborg B5 medium were tested. A reference 2-DE map was established for this soluble extract revealing 1184 spots. The most abundant protein spots were excised, trypsin-digested, and mass spectra obtained via MALDI-TOF and/or LC coupled to ESI-MS. Three hundred and thirty one proteins were identified and their functions were defined based on sequence comparisons and classified in different protein families. In order to analyze the impact of culture medium on the Arabidopsis proteome, we performed the 2-DE map from Arabidopsis cell suspensions cultured in another growth medium Murashige and Skoog (M-S) and 327 major spots were identified. Using PDQuest imaging analysis, significant increases in the amount of several housekeeping enzymes, stress/defense proteins, and heat shock proteins were found in M-S medium. Modified expression of certain proteins and detection of new isoforms involved in nitrate assimilation, nitrogen, and sulfur metabolism were also observed in the M-S medium. This study provides the first 2-DE maps of the soluble proteome of Arabidopsis cell suspensions. The comparative analysis of the Arabidopsis proteome in respect to different nutrient supplies shows that the culture medium may significantly influence the expression pattern of major soluble proteins in Arabidopsis cells. This work also constitutes an important step for further proteomic analysis concerning cell responses to abiotic or biotic stresses.     

Commissioning of a multi‐beamline femtoslicing facility at SOLEIL

The investigation of ultrafast dynamics, taking place on the few to sub‐picosecond time scale, is today a very active research area pursued in a variety of scientific domains. With the recent advent of X‐ray free‐electron lasers (XFELs), providing very intense X‐ray pulses of duration as short as a few femtoseconds, this research field has gained further momentum. As a consequence, the demand for access strongly exceeds the capacity of the very few XFEL facilities existing worldwide. This situation motivates the development of alternative sub‐picosecond pulsed X‐ray sources among which femtoslicing facilities at synchrotron radiation storage rings are standing out due to their tunability over an extended photon energy range and their high stability. Following the success of the femtoslicing installations at ALS, BESSY‐II, SLS and UVSOR, SOLEIL decided to implement a femtoslicing facility. Several challenges were faced, including operation at the highest electron beam energy ever, and achievement of slice separation exclusively with the natural dispersion function of the storage ring. SOLEIL's setup also enables, for the first time, delivering sub‐picosecond pulses simultaneously to several beamlines. This last feature enlarges the experimental capabilities of the facility, which covers the soft and hard X‐ray photon energy range. In this paper, the commissioning of this original femtoslicing facility is reported. Furthermore, it is shown that the slicing‐induced THz signal can be used to derive a quantitative estimate for the degree of energy exchange between the femtosecond infrared laser pulse and the circulating electron bunch.     

ELENA: the extra low energy anti-proton facility at CERN

At the last LEAP conference in Vancouver 2011 the authors stated that a project ”ELENA”, as an abbreviation for Extra Low ENergy Antiproton ring and as first discussed in 1982 for LEAR by H. Herr et al., was freshly proposed with a substantial new design and revised layout and that it was under consideration to be built at CERN. ELENA is an upgrade of the Anti-proton Decelerator (AD) at CERN and is devoted to special experiments with physics using low energy anti-protons. The main topics are the anti-hydrogen production and consecutive studies of the features of this anti-matter atom as well as the anti-proton nucleon interaction by testing the QED to high precision. During the last years the project underwent several steps in presentations at different committees at CERN and was finally approved such that the construction has started. ELENA will increase the number of useful anti-protons by about two orders of magnitude and will allow to serve up to four experiments simultaneously. Very first and convincing results from the experiments at the AD have been published recently. For high precision physics, however, it appears to be cumbersome, time consuming and ineffective when collecting the needed large numbers and high densities of anti-proton clouds with the present AD. Both the effectiveness and the availability for additional experiments at this unique facility will drastically increase, when the anti-proton beam of presently 5 MeV kinetic energy is reduced by the additional decelerator ELENA to 100 keV.     

The Control of Photochromism of [3H]-Naphthopyran Derivatives with Intramolecular CH-π Bonds

The photochromism of [3H]-naphthopyran derivatives can be switched from T-type to inverse- or P-type through the manipulation of relative thermodynamic stabilities of open isomers with intramolecular CH-π bonds.