Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .     

Chemoselective hydrogenation catalysts: Pt on mesostructured CeO2 nanoparticles embedded within ultrathin layers of SiO2 binder

Pt on mesostructured CeO(2) nanoparticles embedded within ultrathin layers of highly structured SiO(2) binder shows highest activity reported with 80% selectivity for the chemoselective hydrogenation of crotonaldehyde. Characterization by transmission electron microscopy (TEM), CO adsorption, and X-ray photoelectron spectroscopy (XPS) show the presence of small Pt metal particles, preferentially located on CeO(2) (70%) together with the formation of Pt-CeO(2-x) sites at the interface between Pt and CeO(2) (4 nm) nanoparticles. These sites are able to polarize the carbonyl group and facilitate the selective hydrogenation of this with respect to the double bond.     

Conjugated Azoalkenesi Part III. Synthesis of Sone Phosphorous Azoalkenes

Recently, some of us reviewed the synthes is and chemical reactions of conjugated azoalkenes.¹ Emphasis was placed on the fact that these derivatives represent at the same time interesting products and useful intermediates in organic chemistry. In fact, conjugated azoolefins undergo a wide range of 1,4-additions, (3+2)- and (4+2)-cycloadditions allowing various functionalizations of the carbon atom adjacent to the carbonyl group, and the construction of many types of interesting five - and six-membered heterocycles, such as widely substituted pyrrole and pyridazine rings. These relevant synthetic objectives appear not to be smoothly obtained by other procedures. In addition, many of the compounds produced from conjugated azoalkenes can profitably be employed in the preparation of natural, pharmaceutical, and phytopharmaceutical products.¹     

Determination of the Chemical Structure of Poly-β (-)-pinene by NMR Spectroscopy

This paper is dedicated to the memory of our friend and colleague Annalaura Segre.

The chemical structure of a series of β (-)-pinene polymers (PBP) obtained by radiation-induced polymerization, free radical initiation, cationic polymerization over a Friedel-Craft catalyst and by coordinative polymerization over a Ziegler-Natta catalyst has been fully elucidated by ¹H and ¹³C-NMR spectroscopy. 2D NMR techniques have been applied in order to assign all the NMR resonances to the structures of the PBP investigated. The NMR spectra show that the most regular PBP structure is obtained by radiation-induced polymerization followed by the free radical initiated polymerization. The most defective structure has been observed in the case of PBP prepared by cationic mechanism over a Friedel-Crafts catalyst. The discussion accounts for different types of defects and cross-links present in the PBPs investigated whose fundamental structure is based on the p-menthene repeating unit.

NMR self-diffusion measurements have been performed to evaluate the molecular weight of all the PBP investigated. The highest molecular weight (2600 Dalton) was found in the case of PBP prepared by Ziegler-Natta catalyst, while the lowest molecular weight was found in the case of PBP prepared by radiation-induced polymerization (about 1000 Dalton).     

Evaluation of rheological properties and swelling behaviour of sonicated scleroglucan samples

Scleroglucan is a natural polysaccharide that has been proposed for various applications. However there is no investigation on its property variations when the molecular weight of this polymer is reduced. Scleroglucan was sonicated at two different polymer concentrations for different periods of time and the effect of sonication was investigated with respect to molecular weight variations and rheological properties. Molar mass, estimated by viscometric measurements, was drastically reduced already after a sonication for a few min. Sonicated samples were used for the preparation of gels in the presence of borate ions. The effect of borax on the new samples was investigated by recording the mechanical spectra and the flow curves. A comparison with the system prepared with the dialysed polymer was also carried out. The anisotropic elongation, observed with tablets of scleroglucan and borax, was remarkably reduced when the sonicated samples were used for the preparation of the gels.     

Synthesis, characterization, and optical properties of 4H-pyran-4-ylidene donor-based chromophores: the relevance of the location of a thiophene ring in the spacer

A series of new 4H-pyran-4-ylidene donor-based chromophores with a thiophene ring in the spacer has been synthesized. The linear and nonlinear optical (NLO) properties of these compounds have been determined and compared with the results of computational calculations. The position of the thiophene ring proved essential to optimize the figure of merit μβ, with the best results obtained when the heterocyclic system was closer to the donor moiety.     

Synthesis of Optically Active 2- and 3-Sec-Butyl Half-Protected Succinaldehydes Through A Common Intermediate

Optically active (2RS,3S)-2-(ethanediyldioxyethyl)-3-methylpentanal (1) and (3RS,4S)-4-methyl-3-(N-methylthiazolidine-2-yl)-hexanal (2) were prepared from (3RS,4S)-4-methyl-3-(N-methyl-thiazolidine-2-yl)-1,1-ethanediyldioxyhexane.     

Photochemical Synthesis of 5-Ethynyl-5′-(1-Propynyl)-2.2′-Bithiophene

The synthesis of the title compound is described. The key-step is the photochemical coupling between 5-iodo-2-thienylcarbaldehyde and 2-bromothio-phene to give 5-bromo-2,2′-bithienyl-5′-carbaldehyde.     

Digital simulation of electrochemical processes involving very fast chemical reactions : Part 2. A new criterion for determining rate constants of consecutive second-order irreversible chemical reactions

Electrode reactions followed by very fast chemical reactions are considered. A simple approach, in which steady state and linear concentration profiles in the reaction layer are assumed, is proposed for the simulation of these processes when the substrate is not present in large excess. When the substrate/depolarizer mole ratio is less than one, two well-separated peaks are detected; under such conditions, working curves that enable the corresponding second-order homogeneous rate constant to be evaluated can be derived by the finite-difference simulation technique. The method is applied to elucidation of the reduction of the tetrakis(triphenylphosphine)nickel(I) complex in the presence of hydrogen ions in acetonitrile at ?30°C.