Interlaboratory reproducibility of mobility parameters in capillary electrophoresis for substance identification in systematic toxicological analysis

An interlaboratory pilot study was performed to determine the reproducibility of mobility parameters in capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC). The study was performed by an intended small number of laboratories (three) that used different brands of instruments (two). The effective mobility was corrected using standards by a method that was recently introduced to obtain a more reproducible migration parameter. A test set of 20 acidic test compounds and 5 reference compounds were analyzed during five days in each laboratory using CZE and MEKC. Buffers used consisted of 90 mM borate set at pH 8.4 (CZE) and 20 mM phosphate, 50 mM sodium dodecyl sulfate set at pH 7.5 (MEKC). Analyses were carried out using fused-silica capillaries at an electric field strength of either 52.6 kV/m or 37.5 kV/m. The interlaboratory reproducibility (mean RSD) of the effective mobility was 3.0% for CZE and 6.7% for MEKC. After applying the correction method, these values became 3.0% for CZE and 3.3% for MEKC, which is adequate for systematic toxicological analysis (STA) applications. A significant improvement of reproducibility for the calculated corrected effective mobility mu(eff)c was observed when variations are high. Therefore, it is recommended to use the correction method in interlaboratory situations, especially when instruments and capillaries from different manufacturers are used.     

Ferrocenyl-functionalised terpyridines and their transition-metal complexes: syntheses,structures and spectroscopic and electrochemical properties

Terpyridine ligands of the type Fc'-X-tpy (Fc'=ferrocenyl or octamethylferrocenyl, X=rigid spacer, tpy'=4'-substituted 2,2':6',2'-terpyridine) were prepared, crystallographically characterised and used for the synthesis of di- and trinuclear bis(terpyridine) complexes of RuII, FeII and ZnII. Donor-sensitiser dyads and triads based on RuII were thoroughly investigated by (spectro)electrochemistry, UV/Vis, transient absorption and luminescence spectroscopy, and an energy level scheme was derived on the basis of the data collected. Intramolecular quenching of the photoexcited RuII complexes by the redox-active Fc' groups can occur reductively and by energy transfer. Both the redox potential of the donor Fc' and the nature of the spacer X have a decisive influence on excited-state lifetimes and emission properties of the complexes. Some of the compounds show room-temperature luminescence, which is unprecedented for ferrocenyl-functionalised compounds of this kind.     

k0-Instrumental Neutron Activation Analysis Establishment at CDTN, Brazil: A successful story

Since 1995 the k ₀ instrumental neutron activation analysis has been applied at Radiochemical Laboratory, CDTN/CNEN, Brazil, by means of TRIGA MARK I IPR-R1 research reactor. At that time , f, and T _n were determined and the most recent determination of these parameters confirmed the great stability of the reactor along these years. In order to verify the efficiency and accuracy of the method, several certified reference materials have been systematically analyzed. Participating in Intercomparison Exercises organized by IAEA has been an important, essential and useful procedure to quality control. CDTN is the only Brazilian Institute to apply the k ₀-INAA to determine elements by means of their isotopes through short, medium and long half life using its own nuclear reactor.     

Optimizing the separation of food dyes by capillary electrophoresis

In this work, the separation of eleven food dyes was evaluated by MEKC in electrolytes composed of tetraborate (TBS), Brij 35, and acetonitrile (ACN) using a factorial design at the following levels: TBS concentration (5 and 10 mmol L(-1)), pH (9.5 and 10.1), Brij concentration (5 and 20 mmol L(-1)), and ACN (5 and 15%). Several response functions were evaluated and indicated 10 mmol L(-1) TBS (pH 10.1), 15% ACN, and 20 mmol L(-1) Brij 35 as best values. However, baseline resolution was not achieved (R(cp) = 0.76) and the method lacked robustness. New conditions were sought by studying the dye mobility versus Brij concentration (5-20 mmol L(-1)). A set of well resolved and more uniformly spaced peaks was obtained with an electrolyte consisting of 7.5 mmol L(-1) TBS (pH 10.1), 10 mmol L(-1) Brij, and 15% ACN. Under these new conditions, complete resolution of the 11 dyes was achieved in less than 9 min. Migration time and peak area repeatabilities were better than 1.6% and 5% CV and the LODs were 0.47 to 2.3 microg mL(-1). The methodology was applied to fruit juice powders, lollipops, and other hard and soft chewable treats.     

Different complexation properties of some hydroxy keto heterocycles toward beryllium(II) in aqueous solutions: experimental and theoretical studies

Four heterocycles containing hydroxy and keto functionalities have been tested as chelating agents of beryllium(II). These are in the order (i) 3-hydroxy-2-methyl-4H-pyran-4-one (maltol, Hma), (ii) 5-hydroxy-2-(hydroxymethyl)-4H-pyran-4-one (kojic acid, Hka), (iii) 3-hydroxy-1,2-dimethyl-4-pyridinone (Hdpp), (iv) 1-(3-hydroxy-2-furanyl)ethanone (isomaltol, Hima). Although the skeletons of the first three species, with one nitrogen or oxygen heteroatom at the six-membered ring, are almost superimposable, straightforward synthesis and crystallization is achieved only for the 1:2 adduct Be(dpp)(2), 1. Also the complex Be(ima)(2), 2, precipitates in high yield but the ima(-) ligand has a different skeletal structure. X-ray determinations of 1 and 2 showed that the Be(2+) ion is pseudotetrahedrally coordinated by two chelating ligands with slightly asymmetric Be-O(alkoxo) and Be-O(keto) bonds. The complex Be(ma)(2) precipitates in low yields together with large amounts of unreacted Hma while, under the same conditions, no trace of the analogous species Be(ka)(2) has been observed. This paper presents the results of potentiometric and NMR studies in the aqueous solutions as well as of DFT structural optimizations for all of the free acids, their associated bases, and the adducts of the type [BeL(H(2)O)(2)](+) and BeL(2) in the gas phase. It is consistently found that the basicity of the ligands and the stability of their complexes decrease in the order dpp(-) > ma(-) > ka(-) > ima(-). In solution, all of the anionic ligands form adducts of the type [BeL(H(2)O)(2)](+) at low pH values, whereas higher concentrations of the free anion are required to form 1:2 adducts. The pH, the basicity, and the stability constants of the complexes as well as the formation of competing beryllium hydroxide species are strictly correlated factors for the obtainment of the latter type of adduct. The DFT calculations account nicely for the different donor powers of the various chelates in terms of electronic redistribution and associated energetics.     

Polyhydroxylated pyrrolizidines. Part 3: A new and short enantiospecific synthesis of (+)-hyacinthacine A2

(1R,2R,3R,7aR)-1,2-Dihydroxy-3-hydroxymethylpyrrolizidine (+)-Hyacinthacine A₂ 1 has been synthesized by Wittig's methodology using [(2′S,3′R,4′R,5′R)-3′,4′-dibenzyloxy-N-tert-butyloxycarbonyl-5′-tert-butyldiphenylsilyloxymethylpyrrolidin-2′-yl]carbaldehyde 3, prepared from a partially protected DMDP 2, and the appropriated ylide, followed by cyclization by an internal reductive amination process of the resulting unsaturated aldehyde 4 and total deprotection.     

Aerobic oxidation of N-alkylamides catalyzed by N-hydroxyphthalimide under mild conditions. Polar and enthalpic effects

The oxidation of N-alkylamides by O(2), catalyzed by N-hydroxyphthalimide (NHPI) and Co(II) salt, leads under mild conditions to carbonyl derivatives (aldehydes, ketones, carboxylic acids, imides) whose distribution depends on the nature of the alkyl group and on the reaction conditions. Primary N-benzylamides lead to imides and aromatic aldehydes at room temperature without any appreciable amount of carboxylic acids, while under the same conditions nonbenzylic derivatives give carboxylic acids and imides with no trace of aldehydes, even at very low conversion. These results are explained through hydrogen abstraction by the phthalimide-N-oxyl (PINO) radical, whose reactivity with benzyl derivatives is governed by polar effects, so that benzylamides are much more reactive than the corresponding aldehydes. The enthalpic effect is, however, dominant with nonbenzylic amides, making the corresponding aldehydes much more reactive than the starting amides. The importance of the bond dissociation energy (BDE) of the O-H bond in NHPI is emphasized.     

Homo- and copolymerization of styrene and 1-alkene using Ph2Zn-Et(Ind)2ZrCl2-MAO initiator systems

Homopolymerization of α-olefins (1-C_nH_2n, n = 6, 8, 10, 12, 16 and 18) and their copolymerization with styrene were carried out in toluene at 60 °C using diphenylzinc-ethenylbisindenylzirconium dichloride-methylaluminoxane as initiator system. Atactic polystyrene and almost isotactic poly(α-olefin)s were obtained. Copolymerization of S/α-olefin with this initiator system gave isotactic olefin-enriched copolymers. According to DSC analysis, the homopolymers P(1-C₁₂H₂₄), P(1-C₁₆H₃₂), and P(1-C₁₈H₃₆) as well their styrene copolymers are crystalline.     

Photochemical behavior of 6-methylpterin in aqueous solutions: generation of reactive oxygen species

Pterins are a family of heterocyclic compounds present in a wide range of living systems that participate in relevant biological functions and are involved in different photobiological processes. 6-Methylpterin (MPT) was investigated for its efficiency of singlet-oxygen (1O2) production and quenching in aqueous solution. The quantum yields of 1O2 production (phi(delta)) was determined by measurements of the 1O2 luminescence in the near-infrared upon continuous excitation of the sensitizer. Values of phi(delta) were found to be 0.10 +/- 0.02 and 0.14 +/- 0.02 in acidic and alkaline media, respectively. Studies of the photooxidation of MPT in acidic (pH = 5.0-6.0) and alkaline (pH = 10.2-10.8) aqueous solutions at 350 nm and room temperature have been performed. The photochemical reactions were followed by UV-visible spectrophotometry, high-performance liquid chromatography and an enzymatic method for H2O2 determination. MPT is not light sensitive in the absence of oxygen, but it undergoes a photooxidation reaction in the presence of oxygen, yielding several nonpteridinic products. The quantum yields of MPT disappearance were determined and values of 2.4 (+/-0.5) x 10(-4) and 8.1 (+/-0.8) x 10(-4) were obtained in acidic and alkaline media, respectively. H2O2 was detected and quantified in irradiated solutions of MPT. The rate constant of the chemical reaction between 1O2 and MPT (k(r)) was determined to be 4.9 x 10(6) M(-1) s(-1) in alkaline medium and the role of 1O2 in the photooxidation of MPT is discussed.     

A study of the voltammetric behaviour of the couples Br-/Br2, Br-/Br3-, Br-/HBrO and Br-/BrO- as a function of pH

The nature of the “blanks” occurring in titrations with electrically generated bromine is discussed. In acidic media such “blanks” are due to the limits of sensitivity of the experimental technique employed (mono- or biamperometric). In alkaline solutions hydrolysis of bromine plays an important role; the formation of hypobromite ion explains the very large “blanks” observed. Acid-base titrations, with bromine as indicator confirmed these findings.