A NMR method for the analysis of mixtures of alkanes with different deuterium substitutions

¹³C NMR at 125.76 MHz with ¹H and ²H decoupling, ²H NMR at 76.77 MHz with ¹H decoupling, and ¹H NMR at 500.14 MHz with ²H decoupling were employed as analytical tools to study the complex mixtures of deuterated ethanes resulting from the catalytic H–D exchange of normal ethane with gas-phase deuterium in the presence of a platinum foil. Reference samples consisting of 1:1 binary mixtures of pure normal ethane and ethane-d_n (n=1–6) were used to identify the peak positions in the ¹³C, ²H, and ¹H NMR spectra due to each individual isotopomer, and the effect of isotopic substitution on the chemical shifts was determined in each case. While the NMR of all three nuclei worked well for the identification of the individual components of the 1:1 standard mixtures, both ¹H and ²H NMR suffered from inadequate resolution when studying complex reaction mixtures because of the broadening of the lines due to ¹H–¹H (¹H NMR) and ²H–²H (²H NMR) couplings. ¹³C NMR was therefore determined to be the method of choice for the quantitative analysis of the reaction mixtures. Using the ¹³C NMR results, a correlation that takes into account the primary and secondary isotope substitution effects on chemical shifts was deduced. This equation was used for the identification of the individual components of the mixtures, and integration of the individual observed resonances was then employed for quantification of their composition. This study shows that ¹³C NMR with ¹H and ²H decoupling is a viable procedure for studying mixtures of deuterated ethanes. Furthermore, the additivity of the isotopic effects on chemical shifts and the transferability of the values obtained with ethane to other molecules makes this approach general for the analysis of other isotopomer mixtures.     

Products of the addition of water molecules to Al3O3- clusters: structure, bonding, and electron binding energies in Al3O4H2-, Al3O5H4-, Al3O4H2, and Al3O5H4

Two stable products of reactions of water molecules with the Al3O3- cluster, Al3O4H2- and Al3O5H4-, are studied with electronic structure calculations. There are several minima with similar energies for both anions and the corresponding molecules. Dissociative absorption of a water molecule to produce an anionic cluster with hydroxide ions is thermodynamically favored over the formation of Al3O3-(H2O)n complexes. Vertical electron detachment energies of Al3O4H2- and Al3O5H4- calculated with ab initio electron propagator methods provide a quantitative interpretation of recent anion photoelectron spectra. Contrasts and similarities in these spectra may be explained in terms of the Dyson orbitals associated with each transition energy.     

New fluorescent probes for testing combinatorial catalysts with phosphodiesterase and esterase activities

Combinatorial development of new catalysts with phosphodiesterase and esterase activities requires specific fluorescent probes for rapid visual detection of hydrolytic activity. Such fluorescent probes have been synthesized with special attention to solubility in water and stability towards spontaneous hydrolysis at a given pH. The probes reported here include compound 5 based on a fluorescein fluorophore, compound 12 for FRET-detection of phosphodiester hydrolysis and compound 25 based on a quinolinium fluorophore.     

Counterions in poly(allylamine hydrochloride) and poly(styrene sulfonate) layer-by-layer films

The amount of counterions in layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) has been determined with X-ray photoelectron spectroscopy (XPS) for films prepared from solutions with various NaCl concentrations. Sodium and chloride counterions are present in LBL films produced from salt solutions, which are located at the surface and in the bulk of the films. The percentage of bulk counterions increases with the ionic strength of the polyelectrolyte before reaching a constant value. The bulk sodium/sulfur percentage ratios tend to 0.8 for samples washed with pure water and for samples washed with NaCl aqueous solutions, while the bulk chlorine/nitrogen percentage ratios tend to 0.5 for the same samples. The ratio between the percentages of polyelectrolyte ionic groups lies close to unity for all samples, indicating that counterions do not contribute to charge compensation in the polyelectrolyte during the adsorption process. The presence of counterions in LBL films is explained by Manning condensation near the polyelectrolyte ionic groups, leading to inter-polyelectrolyte ionic bondings via ionic networks. It is believed that condensation leads to the formation of NaCl crystallites in these LBL films, which was confirmed by X-ray diffraction measurements.     

Short stereocontrolled synthesis of trans and cis-tetrahydro-pyrazinoisoquinolinediones

Addition of aldehyde dimethyl acetals (here acetaldehyde) to unisolated O-trimethylsilyl derivatives of 1-acetyl-3-arylmethylpiperazine-2,5-diones (here 2,5-dimethoxyphenyl), in the presence of TMSOTf as the catalyst, gave nearly quantitatively the corresponding N-methoxyalkyl derivatives which, under acidic treatment, gave in very good yield through a Pictet-Spengler-type reaction involving N-acyliminium cations (6S*,11aR*)-2-acetyl-6-alkyl-3,6,11,11a-tetrahydro-2H-pyrazino[1,2-b]isoquinoline-1,4-diones. Epimerization of the 11a-stereocentre was accomplished by radical bromination, spontaneous hydrobromide elimination and catalytic hydrogenation, to give the (6S*,11aS*)-isomers. We propose these compounds as precursors of tetrahydroisoquinoline antitumour antibiotics.     

Soluble alpha-amino acid salts in acetonitrile: practical technology for the production of some dipeptides

Alpha-amino acids are soluble in acetonitrile when treated with phosphazene bases. As a result, the protection/deprotection events that are usually required for peptide coupling reactions can be minimized. This is illustrated in the synthesis of the important angiotensin-converting enzyme (ACE) inhibitor enalapril. [reaction: see text]     

Complete 1H and 13C NMR assignments for two new monodesmoside saponins from Pentaclethra macroloba (Willd.) Kuntze

A detailed NMR study and full assignments of the 1H and 13C spectral data for two novel triterpenoid saponins isolated from the stem bark of Pentaclethra macroloba (Willd.) Kuntze are described. Their structures were established using a combination of 1D and 2D NMR techniques including 1H,1H-COSY, TOCSY, NOESY, gs-HMQC and gs-HMBC, and also electrospray ionization mass spectrometry and chemical methods. The structures were established as 3beta-O-([O-beta-D-glucopyranosyl-(1-->2)-O-beta-D-glucopyranosyl-(1-->4)-O-beta-D-glucopyranosyl-(1-->3)-O-alpha-L-rhamnopyranosyl-(1-->2)]-[O-beta-D-glucopyranosyl-(1-->3)-O-beta-D-glucopyranosyl-(1-->4)])-alpha-L-arabinopyranosylhederagenin (1) and 3beta-O-)[O-beta-D-glucopyranosyl-(1-->2)-O-beta-D-glucopyranosyl-(1-->4)-O-beta-D-glucopyranosyl-(1-->3)-O-alpha-L-rhamnopyranosyl-(1-->2)]-[O-beta-D-glucopyranosyl-(1-->3)-O-beta-D-glucopyranosyl-(1-->4)])-alpha-L-arabinopyranosyloleanolic acid (2).     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Reductive ring opening of dihydrodibenzothiepine and dihydrodinaphtho-oxepine and -thiepine

The 4,4′di-tert-butylbiphenyl (DTBB)-catalysed lithiation of dihydrodibenzothiepine (1) at −78 °C for 30 min followed by reaction with a carbonyl compound [^tBuCHO, Ph(CH₂)₂CHO, PhCHO, (n-C₅H₁₁)₂CO, (CH₂)₅CO, (CH₂)₇CO, (−)-menthone] at the same temperature leads, after hydrolysis with 3 M hydrochloric acid, to sulphanyl alcohols 2. If after addition of a carbonyl compound as the first electrophile [Me₂CO, (CH₂)₅CO, (−)-menthone], the resulting dianion of type II is allowed to react at room temperature for 30 min, a second lithiation takes place to give an intermediate of type III, which by reaction with a second electrophile [Me₂CO, Et₂CO, (CH₂)₅CO, ClCO₂Et], yields, after hydrolysis, difunctionalised byphenyls 4. The cyclisation of the sulphanyl alcohol 2c under acidic conditions yields the eight-membered sulphur containing heterocycle 3. The lithiation of dihydrodinaphthoheteroepines 7 and 10 with 2.2 equiv of lithium naphthalenide in THF at −78 °C followed by reaction with different electrophiles [H₂O, D₂O, ^tBuCHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO] at the same temperature leads, after hydrolysis, to unsymmetrically 2,2′-disubstituted binaphthyls 9 and 12, respectively. When the lithiation is performed with an excess of lithium in the presence of a catalytic amount of DTBB (10% molar), a double reductive cleavage takes place to give the dianionic intermediate VII, which by reaction with different electrophiles [H₂O, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO], followed by hydrolysis with water, yields symmetrically 2,2′-disubstituted binaphthyls 8 and 11. In the case of starting from (R)- or (S)-dihydrodinaphthoheteroepines 7 and 10, these methodologies allow us to prepare enantiomerically pure compounds 8, 11 and 12.     

Synthesis,conformational analysis and in vivo assays of an anti-cancer vaccine that features an unnatural antigen based on an sp2-iminosugar fragment

The Tn antigen (GalNAc-α-1-O-Thr/Ser) is a well-known tumor-associated carbohydrate determinant. The use of glycopeptides that incorporate this structure has become a significant and promising niche of research owing to their potential use as anticancer vaccines. Herein, the conformational preferences of a glycopeptide with an unnatural Tn antigen, characterized by a threonine decorated with an sp²-iminosugar-type α-GalNAc mimic, have been studied both in solution, by combining NMR spectroscopy and molecular dynamics simulations, and in the solid state bound to an anti-mucin-1 (MUC1) antibody, by X-ray crystallography. The Tn surrogate can mimic the main conformer sampled by the natural antigen in solution and exhibits high affinity towards anti-MUC1 antibodies. Encouraged by these data, a cancer vaccine candidate based on this unnatural glycopeptide and conjugated to the carrier protein Keyhole Limpet Hemocyanin (KLH) has been prepared and tested in mice. Significantly, the experiments in vivo have proved that this vaccine elicits higher levels of specific anti-MUC1 IgG antibodies than the analog that bears the natural Tn antigen and that the elicited antibodies recognize human breast cancer cells with high selectivity. Altogether, we compile evidence to confirm that the presentation of the antigen, both in solution and in the bound state, plays a critical role in the efficacy of the designed cancer vaccines. Moreover, the outcomes derived from this vaccine prove that there is room for exploring further adjustments at the carbohydrate level that could contribute to designing more efficient cancer vaccines.

An anti-cancer vaccine based on an unnatural antigen with an sp²-iminosugar fragment.