Utility of 4,6-dichloro-2-(methylthio)-5-nitropyrimidine. Part 2: Solution phase synthesis of tetrasubstituted purines

A simple synthesis of tetrasubstituted purines is disclosed based on the solution phase elaboration of 4,6-dichloro-2-methylthio-5-nitropyrimidine. One-pot sequential C4 and C6 chloride substitution by secondary and primary amines yields 4,6-diamino-2-methylthio-5-nitropyrimidines. mCPBA-mediated oxidation of the methylthio moiety to the corresponding sulfone allows facile substitution at the 2-position. CrCl₂ assisted reduction of the nitro group, followed by acid catalyzed orthoester cyclization, then provides novel tetrasubstituted purines not accessible by other methods.     

Copper determination in biological materials by ETAAS using W-Rh permanent modifier

A tungsten-rhodium treatment on the integrated platform of a transversely heated graphite atomiser was used as a permanent chemical modifier for the determination of copper in biological materials by using digested samples as well as slurry sampling in electrothermal atomic absorption spectrometry. The W-Rh permanent modifier was as efficient as Pd+Mg(NO(3))(2) conventional modifier for obtaining good Cu thermal stabilisation in the digested and slurry samples. The permanent W-Rh modifier remained stable by approximately 300 and 250 firings when 20 mul of digested sample and 20 mul of slurry were delivered into the atomiser, respectively. In addition, the permanent modifier increased the tube lifetime up to 1370 and 744 analytical measurements in the digested and slurry samples, respectively. Also, when the W-Rh permanent modifier was employed, there was less variation of the slope of the analytical curves during the total atomiser lifetime, resulting in a decreased need of re-calibration during routine analysis, increasing the sample throughput, and consequently diminishing the variable analytical costs. Detection limits obtained with W-Rh permanent modifier were 0.64 and 0.33 mug g(-1) Cu for digested (dilution factor 100 ml g(-1)) and 1.0% m/v slurries of biological materials, respectively. Results for the determination of copper in the samples were in agreement with those obtained with decomposed sample solutions by using Pd+Mg(NO(3)), since no statistical differences were found after applying the paired t-test at the 95% level.     

Langmuir monolayers of the zwitterionic surfactant hexadecyl 1-N-L-tryptophan glycerol ether

We report the formation of Langmuir monolayers of pure zwitterionic hexadecyl 1-N-L-tryptophan glycerol ether (C(16)-TGE) surfactant and mixed monolayers of cationic-zwitterionic surfactant obtained modifying the pH of the subphase. The pressure-area and surface potential-area isotherms and fluorescence microscopy measurements have been used to characterize the surface phase transitions in the monolayers. These transitions appeared at larger areas as the pH decreased from 6.0 to 2.0 and almost disappeared as the pH decreased further. The analysis of the surface potential and the infrared reflection-absorption spectroscopy data suggests that the phase transition is associated with a change of orientation of both the hydrocarbon chain and the aromatic group of the surfactant with respect to the air-water surface. The surface rheology of the monolayers was studied by quasielastic light scattering and by the oscillatory barrier technique. The results indicate that there is at least one relaxation process in the monolayer.     

Ferrocene-containing carbohydrate dendrimers

Aliphatic amines, incorporating one or three (branched) acylated beta-D-glucopyranosyl residues, were coupled with the acid chloride of ferrocenecarboxylic acid and with the diacid chloride of 1,1'-ferrocenedicarboxylic acid to afford four dendrimer-type, carbohydrate-coated ferrocene derivatives in good yields (54-92%). Deprotection of the peracylated beta-D-glucopyranosyl residues was achieved quantitatively by using Zemplén conditions, affording four water-soluble ferrocene derivatives. When only one of the two cyclopentadienyl rings of the ferrocene unit is substituted, strong complexes are formed with beta-cyclodextrin in H2O, as demonstrated by liquid secondary ion mass spectrometry (LSIMS), 1H NMR spectroscopy, electrochemical measurements, and circular dichroism spectroscopy. Molecular dynamics calculations showed that the unsubstituted cyclopentadienyl ring is inserted through the cavity of the toroidal host in these complexes. The electrochemical behavior of the protected and deprotected ferrocene-containing dendrimers was investigated in acetonitrile and water, respectively. The diffusion coefficient decreases with increasing molecular weight of the compound. The potential for oxidation of the ferrocene core, the rate constant of heterogeneous electron transfer, and the rate constant for the energy-transfer reaction with the luminescent excited state of the [Ru(bpy)3]2+ complex (bpy = 2,2'-bipyridine) are strongly affected by the number (one or two) of substituents and by the number (one or three) of carbohydrate branches present in the substituents. These effects are assigned to shielding of the ferrocene core by the dendritic branches. Electrochemical evidence for the existence of different conformers for one of the dendrimers in aqueous solution was obtained.     

FLAVIN-MEDIATED PRODUCTION OF HYDROGEN PEROXIDE IN PHOTOELECTROCHEMICAL CELLS

A photoelectrochemical cell for hydrogen peroxide production using flavin photosystems is described. The anodic solution, which is kept free of oxygen by passing an Ar stream through it, contains the photoreceptor (flavin mononucleotide or lumiflavin) and the electron donor (EDTA, semicarbazide or hydroxylamine), while the peroxide is formed at the electrode of the cathodic solution, whose oxygen content is increased by bubbling with pure oxygen. Among several electrode metals that have been tested (Ag, Pt and Hg), Hg is the most efficient. The pH of the anodic and cathodic solutions should be adjusted to 14 and 1, respectively, for optimum results.     

Synthesis, characterization, biocide and toxicological activities of di-n-butyl- and diphenyl-tin(IV)-salicyliden-beta-amino alcohol derivatives

The one pot reaction of salicylaldehyde 1, beta-amino alcohols 2a-2c, and di-n-butyltin(IV) oxide 3a or diphenyltin(IV) oxide 3b produced five diorganotin(IV) compounds, 4a-4c, 5a, and 5c, in good yields. All compounds were characterized by IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, and elemental analysis; furthermore, compounds 4b, 4c, 5a, and 5c were characterized by X-ray diffraction analysis. After the structural characterization, all of the compounds were tested in vitro against Bacillus subtilis (Gram-positive, strain ATCC 6633), Escherichia coli (Gram-negative, strain DH5alpha), Pseudomonas aeruginosa (Gram-negative, strain BH3), Desulfovibrio longus (strain DSM 6739), and Desulfomicrobium aspheronum (strain DSM 5918) to assess their antimicrobial activity. Compounds 4 and 5 demonstrated a wide range of bactericidal activities against the tested aerobic (one Gram-positive and two Gram-negative subtypes) and anaerobic bacteria (two sulfate-reducing bacteria, SRB). Compound 5 had better bactericidal performances than compound 4. For all of the compounds, the acute toxicity was measured using luminescent bacteria toxicity (LBT-Microtox) tests to track their further environmental impact. According to these results and in order to fulfill environmental regulations, the toxicity of the compounds studied herein can be modulated through the proper selection of the disubstituted tin(IV) moiety.     

Regioselective synthesis of 4- and 5-oxazole-phosphine oxides and -phosphonates from 2H-azirines and acyl chlorides

A simple and efficient regioselective synthesis of 4-oxazole-phosphine oxides 11 and -phosphonates 12 from 2H-azirine-phosphine oxides 1 and -phosphonates 6 is described. The key step for the synthesis of oxazoles 11 is a base-mediated ring closure of vinylogous α-aminophosphorus compounds derived from phosphine oxides 4 and from phosphonates 8. These derivatives 4 and 8 are obtained by reaction of functionalized azirines 1 and 6 with acyl chlorides 2 and subsequent acid-catalyzed ring opening of N-acylaziridine-phosphine oxides 3 and -phosphonates 7. Regioselective thermal ring cleavage of N-acylaziridine-phosphine oxides 3 leads α-chloro-β-(N-acylamido)-phosphine oxides 13 and their treatment with bases gives 5-oxazole-phosphine oxides 16.     

Limited flexibility of lactose detected from residual dipolar couplings using molecular dynamics simulations and steric alignment methods

The conformational flexibility of lactose in solution has been investigated by residual dipolar couplings (RDCs). One-bond carbon-proton and proton-proton coupling constants have been measured in two oriented media and interpreted in combination with molecular dynamics simulations (MD). Two different approaches, known as PALES (Zweckstetter et al., J. Am. Chem. Soc. 2000, 122, 3791-3792) and TRAMITE (Azurmendi et al., J. Am. Chem. Soc. 2002, 124, 2426-2427), have been used to determine the alignment tensor from a shape-induced alignment model with the oriented medium. The steric alignment of the structures from several MD trajectories has provided ensemble averaged RDCs that have been compared with the experimental ones. The obtained results reveal the almost exclusive presence of a major low energy region defined as syn-phi/syn-psi (> 97%), for which sampling occurs in a dynamic manner. This result satisfactorily agrees with that determined by standard NOE-based methods.     

Asymmetric synthesis of 2H-azirines derived from phosphine oxides using solid-supported amines. Ring opening of azirines with carboxylic acids

A simple and efficient asymmetric synthesis of 2H-azirine-2-phosphine oxides 3 is described. The key step is a solid-phase bound achiral or chiral amine-mediated Neber reaction of beta-ketoxime tosylates derived from phosphine oxides 1. Reaction of 2H-azirines 3 and 11 with carboxylic acids 4 gives phosphorylated ketamides 5 and 12. Ring closure of ketamides 5 and 12 with triphenylphosphine and hexachloroethane in the presence of triethylamine leads to the formation of phosphorylated oxazoles 8 and 13.     

Synthesis of pyrazine-phosphonates and -phosphine oxides from 2H-azirines or oximes

[reaction: see text] Tetrasubstituted pyrazines containing two phosphonate groups 2 in positions 2 and 5 and trisubstituted pyrazines containing a phosphonate 5 or a phosphine oxide group 7 in position 2 are obtained by thermal treatment of 2H-azirine-2-phosphonates 1 and -phosphine oxides 6. These pyrazines can also be prepared from beta-ketoxime tosylates 9 and 10 or from oxime derived from phosphine oxide 11.