A novel one-pot method for the preparation of pyrazoles by 1,3-dipolar cycloadditions of diazo compounds generated in situ

A convenient one-pot procedure for the preparation of pyrazoles by 1,3-dipolar cycloaddition of diazo compounds generated in situ has been developed. Diazo compounds derived from aldehydes were reacted with terminal alkynes to furnish regioselectively 3,5-disubstituted pyrazoles. Furthermore, the reaction of N-vinylimidazole and diazo compounds derived from aldehydes gave exclusively 3-substituted pyrazoles in a one-pot process.     

The modulating possibilities of dicarbollide clusters: optimizing the Kharasch catalysts

exo-Cluster dicarbollides substitution has allowed tuning of the E degrees (Ru(II)/Ru(III)) potential to obtain the best-performing Kharasch catalyst. We postulate that this is possible through the to-and-fro electron movement between the boron cluster and the sulfonium moieties.     

High performance liquid chromatography post-column chemiluminescence determination of sulfonamide residues in milk at low concentration levels using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate as chemiluminescent reagent

The determination of seven sulfonamides by means of HPLC with chemiluminescence detection is proposed for the first time. The analytes are derivatized with fluorescamine, separated and subsequently they participate in the post-column chemiluminescence (CL) peroxyoxalate system using imidazole as a catalyst. Among the different peroxyoxalates tested, bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate provides higher sensitivities and stabilities, avoiding precipitation problems. A rigorous optimization of the significant variables by means of experimental designs has been developed in order to reconcile the chromatographic conditions with the CL reaction. The method provides detection limits in the low microgl(-1) range and has been satisfactorily applied to the analysis of spiked raw milk samples.     

Synthesis of novel 2,5-dihydro-1,5,2-diazaphosphinines from primary enamine phosphonates and from alkyl phosphonates

A simple method for the preparation of phosphorus-containing pyrimidine analogues such as 2,5-dihydro-2-ethoxy-1,5,2-diazaphosphinine 2-oxides 9, 12-15 and adducts 3, 10 is described. Dihydrophosphinines 9, 12-15 are prepared from primary enamine phosphonates and nitriles or from phosphonates and nitriles in the presence of base, while highly stable hydrogen-bonded amine-dihydro-diazaphosphinine adducts 3, 10 are obtained by the addition of amine to dihydrophosphinines 9 or by reaction of alkylphosphonates with nitriles in the presence of LDA.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.     

Simultaneous determination of propacetamol and paracetamol by derivative spectrophotometry

The present paper describes a procedure that phenols in air were preconcentrated in a membrane cell and their content was determined by adsorptive polarography. First, the phenols in air samples were preconcentrated in a membrane cell using 2.0 M NaOH solution, then in a pH 1.3 buffer solution p-bromophenylamine forms a diazoate with NaNO(2), and into the mixture the collected phenols were added to form azo-compound in a pH 13 buffer solution. The azo-compound can be adsorbed at the mercury electrode and yields a sensitive oscillopolarographic wave. Over the range 2.0x10(-8)-2.0x10(-5) M, the peak currents are linearly proportional to the concentration of phenols. The detection limit is 5.0x10(-9) M.     

Pyrylium-containing polymers as sensory materials for the colorimetric sensing of cyanide in water

A sensory polymeric material for the colorimetric sensing of cyanide in water has been developed based on the reactivity of this anion with the pyrylium cation.     

Size evolution of the vibrational predissociation process in Br2...Nen clusters: simulation and kinetic study

A hybrid quantum-classical simulation of the vibrational predissociation of Br2...Nen, (n = 2-11) clusters in the B electronic state is carried out. The time-evolution of the reactants, products, and intermediates is analyzed by a kinetic mechanism consisting of three elementary steps: direct vibrational predissociation (VP), intramolecular vibrational redistribution (IVR), and evaporative cooling (EC). The importance of intramolecular vibrational redistribution followed by evaporative cooling relative to direct vibrational predissociation is shown to increase rapidly with increasing cluster size. Final product state distributions reveal that only one or less Br2 stretching quantum per neon atom is required in order to achieve complete dissociation (n quanta for n < or = 9 and n - 1 for n = 10 and 11). The proportion of available energy going into translation is proposed as a parameter to study the statistical behavior of the Van der Waals clusters. It is shown to depend only on the number of remaining degrees of freedom, a characteristic of a statistical behavior, for n > or = 3.     

Developing an on-line derivatization of FAs by microwave irradiation coupled to HPLC separation with UV detection

The development of analytical methods for routine simultaneous identification and quantification of carboxylic fatty acids (CFAs) are required in different fields, such as, pharmaceutical cosmetics, food products and formulations of water–microemulsion–oil systems. Determination of CFAs has been developed mainly by gas chromatography (GC). As an alternative to GC, liquid chromatography (LC) has better sensitivity and selectivity. However, most CFAs show no useful absorption in ultraviolet–violet (UV–Vis) region, one of the more used detection technique in high-performance liquid chromatography (HPLC). In order to allow the use of UV–Vis detection, the use of pre-column derivatization has been reported to increase sensitivity and selectivity. Therefore, establishment of a simpler and faster on-line method with complete separation is needed for the screening of large numbers of samples. 2,4-Dinitrophenylhydrazine (2,4-DNPH.), benzoil chloride (BC), and phenylhydrazine (PH) were used for derivatization of different FAs by microwaves radiation (MW). After the on-line derivatization, products were separated and quantified by HPLC. Reactor coil was placed inside of microwaves oven at 450 W. Parameters as flow, amount of reagents, irradiation time, and chromatographic conditions were optimized. The continuous analysis using the MW–HPLC–UV system provided high sensitivity and reduced both the amount of reagent used and the analysis times. This proposed method can be used for the routine analysis of FAs contained in water–microemulsion–oil systems, to quantify the total acid fraction in each phase.