Reactivity of 2-deoxy-2-iodoglycosyl isothiocyanates with O-, S-, and N-nucleophiles. Synthesis of glycopyranoso-fused thiazoles

The reactivity of 2-deoxy-2-iodoglycosyl isothiocyanates toward O- and S-nucleophiles gives an easy access to 2-deoxy-2-iodoglycopyranosyl thiocarbamates and dithiocarbamates. Internal nucleophilic displacement of the iodine by the sulfur atom in these compounds allows the preparation of glycopyranoso[1,2-d]-1,3-thiazoles and glycopyranoso[1,2-d]-1,3-thiazolidin-2-one or -2-thione. Reaction with amines or polyamines as N-nucleophiles led directly to 2-aminoglycopyranoso[1,2-d]-1,3-thiazoles without isolation of the intermediate thioureas. Methyl 2-deoxy-2-iodoglycopyranosyl thiocarbamates also allow the synthesis of 2-deoxyglycopyranosyl thiocarbamates or 2-deoxy-2-iodoglycopyranosyl carbamates.     

SOLVENT EFFECTS ON THE TAUTOMERIZATION OF 5′-DEOXYPYRIDOXAL. A PHOTOPHYSICAL STUDY

Abstract— Absorption and fluorescence spectra of 5′-deoxypyridoxal (DPL) in various pure solvents and mixtures were recorded both at room temperature and over the range10–65°C. The areas under the absorption bands were analyzed to obtain the mole fraction (f_N, f_z) of two tautomers (the zwitterionic, Z, and neutral, N, forms) in the ground state. The following spectral parameters were determined from the fluorescence spectra: Stokes shift (Δv), fluorescence quantum yield of the neutral form (Q_N), fluorescence ratio of the neutral to the zwitterionic form (ø_N/ø_Z) and the rate constant of tautomerization (k₁) from Z to N in the excited state. Some of these parameters (f_N, Δv, Q_N, k₁) were found to depend on the proton donor character of the solvent, whereas others (ø_N/ø_Z) depended on its dipole moment. Thus, the absorption and fluorescence spectra of DPL allow one to obtain information on the polarity and the concentration of –OH groups on its environment.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Determination of the amino acid tryptophan and the biogenic amine tryptamine in foods by the heavy atom induced-room temperature phosphorescence methodology

Very simple and selective methods are presented to determine the amino acid tryptophan (Trp) and the biogenic amine tryptamine (Tryp), both compounds with an indole-type molecular structure by the methodology named Heavy Atom Induced-Room Temperature Phosphorescence (HAI-RTP) which constitutes the first time that HAI-RTP has been used to detect compounds with non-naphthalenic structures in their molecules. Different variables affecting the phosphorescence signal (heavy atom perturber and sodium sulfite concentration) were carefully studied. The analytical curves give a linear dynamic range of 15-100 ng ml(-1) and a detection limit of 4 ng ml(-1) for Trp and 94-400 ng ml(-1) and 28 ng ml(-1) for Tryp. The methods have been successfully applied to the analysis of complex food matrices such as the presence of tryptophan in yoghurt and tryptamine in bottled beer. A single alkaline hydrolysis to release Trp from yoghurt proteins and two methods for extracting Tryp from beer samples are proposed and optimised. A total Trp content of 374 mg of Trp per kg of yoghurt was quantified by the standard addition method of calibration and a recovery of 90% was obtained for 250 ng ml(-1) of Tryp in spiked non-alcoholic beer samples.     

Room-temperature synthesis and conductivity of the pyrochlore type Dy2(Ti1−yZry)2O7 (0?y?1) solid solution

Different compositions in a solid solution of general formula Dy₂(Ti_1−yZr_y)₂O₇, showing high oxygen ion conductivity, have been successfully prepared at room temperature via mechanochemical synthesis. Stoichiometric mixtures of the constituent oxides were dry milled together in a planetary ball mill by using zirconia vials and balls. Chemical changes in the powder mixtures as a function of composition and milling time were followed by X-ray diffraction and revealed that, in all cases and after milling for 19 h, the powder mixtures consisted of a single phase. Electrical properties were measured on sintered pellets as a function of frequency, temperature and zirconium content, revealing an increase in conductivity of more than one order of magnitude for y?0.4, which, as observed in the similar Y₂(Ti_1−yZr_y)₂O₇, has been related with the onset of disordering of the anion sublattice. Despite increasing structural disorder with increasing Zr content, conductivity remains almost constant for y>0.6, reaching a maximum value of ∼5×10⁻³ for Dy₂Zr₂O₇ at 900 °C.     

A novel one-pot method for the preparation of pyrazoles by 1,3-dipolar cycloadditions of diazo compounds generated in situ

A convenient one-pot procedure for the preparation of pyrazoles by 1,3-dipolar cycloaddition of diazo compounds generated in situ has been developed. Diazo compounds derived from aldehydes were reacted with terminal alkynes to furnish regioselectively 3,5-disubstituted pyrazoles. Furthermore, the reaction of N-vinylimidazole and diazo compounds derived from aldehydes gave exclusively 3-substituted pyrazoles in a one-pot process.     

Synthesis of novel 2,5-dihydro-1,5,2-diazaphosphinines from primary enamine phosphonates and from alkyl phosphonates

A simple method for the preparation of phosphorus-containing pyrimidine analogues such as 2,5-dihydro-2-ethoxy-1,5,2-diazaphosphinine 2-oxides 9, 12-15 and adducts 3, 10 is described. Dihydrophosphinines 9, 12-15 are prepared from primary enamine phosphonates and nitriles or from phosphonates and nitriles in the presence of base, while highly stable hydrogen-bonded amine-dihydro-diazaphosphinine adducts 3, 10 are obtained by the addition of amine to dihydrophosphinines 9 or by reaction of alkylphosphonates with nitriles in the presence of LDA.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.