Synthesis of novel 2,5-dihydro-1,5,2-diazaphosphinines from primary enamine phosphonates and from alkyl phosphonates

A simple method for the preparation of phosphorus-containing pyrimidine analogues such as 2,5-dihydro-2-ethoxy-1,5,2-diazaphosphinine 2-oxides 9, 12-15 and adducts 3, 10 is described. Dihydrophosphinines 9, 12-15 are prepared from primary enamine phosphonates and nitriles or from phosphonates and nitriles in the presence of base, while highly stable hydrogen-bonded amine-dihydro-diazaphosphinine adducts 3, 10 are obtained by the addition of amine to dihydrophosphinines 9 or by reaction of alkylphosphonates with nitriles in the presence of LDA.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

A new technique for the identification of chloride ions by the formation of chromyl chloride

Summary A new technique is described for the identification of the chloride ion through the formation of chromyl chloride, based on the extraction of the latter with carbon tetrachloride. The identification limit is 2g of chloride. It is possible to carry out the test in the presence of many other anions, including fluoride, which cannot be present when the traditional distillation technique is employed.

---

Zusammenfassung Vorgeschlagen wird eine neue Technik zum Chloridnachweis durch Bildung von Chromylchlorid. Dieser Nachweis beruht auf der Extraktion des Chromylchlorids mit Tetrachlorkohlenstoff. Die Nachweisgrenze liegt bei 2g Chlorid, wobei die Möglichkeit besteht, den Test auch in Gegenwart von Fluorid durchzuführen, das bei Anwendung der üblichen Destillationsmethoden nicht anwesend sein darf.

     

From terminal alkynes directly to branched amines

The one-pot synthesis of several branched secondary aliphatic amines is described. Hydroamination of terminal alkynes with aliphatic primary amines in the presence of Cp₂Ti(η²-Me₃SiCCSiMe₃) gives the corresponding aldimines as intermediates. Reaction of these in situ produced aldimines with organolithium reagents (n-BuLi, PhLi) provides the α-branched amines in an easy way in upto 78% overall yield.     

Determination of phosphorus in samples of vegetable origin Mineralization with molten alkali and spectrophotometric determination

For determination of phosphorus in samples of vegetable origin (leaves and wheat flour) decomposition by means of molten alkali is proposed. Two procedures have been studied, one with dry reagents including an auxiliary oxidant, and the other with initially moist alkali with no extra oxidant. The fusion product is easily soluble and produces a solution suitable for elemental analysis. The phosphorus is determined by the molybdenum blue method. The suggested mineralization is rapid, accurate and precise.     

Highly stereoselective syntheses of syn- and anti-1,2-amino alcohols

The reduction of N-protected amino ketones can be carried stereoselectively to produce either the syn- or anti-amino alcohol diastereomer. Carbamate-protected amino ketones can be reduced predictably and selectively to anti-amino alcohols with LiAlH(O-t-Bu)3 in ethanol at -78 degrees C. N-Trityl-protected amino ketones can be reduced selectively to syn-amino alcohols with LiAlH(O-t-Bu)3 in THF at -5 degrees C.     

Simultaneous determination of mercury and arsenic by anodic stripping voltammetry

An electrochemical method for the simultaneous determinations of Hg^II concentration and total As^III and As^V concentration has been developed. The method does not require the additional preliminary step of the chemical reduction of As^V to As^III, or oxidation of As^III to As^V before stripping analysis takes place. Also, the method for the simultaneous determination of Hg^II concentration and As^III concentration is described. Measurements were performed in 0.1 M HCl using a gold-plated graphite electrode as sensor. Detection limits for both methods are below 0.4 ppb. Relative standard deviation did not exceed 15%. The possible interference by other trace metals was investigated. Analyses of natural water and industrial solutions were made using proposed methods and AAS. The t-test demonstrates that there was no significant difference between the results obtained with these methods. Proposed methods decrease the time of analysis because concentrations of the Hg^II and arsenic ions were measured simultaneously. Also, the removal of the additional step of chemical reduction of As^V to As^III or oxidation of As^III to As^V decreases analysis time, and also reduces the chance of contamination due to the use of additional reagents.     

The effect of the amphiprotic nature of human hair keratin on the adsorption of high charge density cationic polyelectrolytes

Adsorption of the cationic polymers poly(methacrylamidopropyltrimethyl ammonium chloride) (PMAPTAC) and poly(1,1-dimethylpiperidinium-3,5-diallylmethylene chloride) (PDMPDAMC) on human hair was studied by measurements of the amount of polymer adsorbed and by the streaming potential method. Results reflect the amphoteric nature of the keratin surface and show that the excess of anionic sites at pH values above 4 is the main driving force for the adsorption of cationic polyelectrolytes. Lowering the pH below 4 or addition of neutral salt (KCl) reduces the amount of adsorbed polymer. It was shown that the adsorption of cationic polymer in the concentration range 0.01 to 0.1 % and at neutral pH reverses the overall character of the surface from anionic to cationic. Keratin fibers modified in this manner do not exhibit amphoteric character and bear excess positive charge in the pH range 2–9.5. The value of the amount of the polymer adsorbed at saturation concentration (2 mg/g) as well as the lack of molecular weight effect in the range (5 · 10⁴ – 10⁶) on the amount of polymer adsorbed suggest that polymer chains adopt a rather extended conformation on the fiber surface. Some data concerning the formation of a complex between adsorbed cationic polymer and anionic detergents or polyelectrolytes are also presented.     

Synthesis of [13]-membered macrocyclic stevastelins via a transesterification reaction as the key step: total synthesis of stevastelin C3

A new synthesis of stevastelin C3 (3), a [13]-membered ring component of the stevastelin family, whose structure was recently revised, is reported. Initially, a macrolactonization approach was attempted to generate the [13]-membered macrolactone but this met with failure, so a translactonization reaction was tried to obtain the targeted stevastelin C3 (3) from the corresponding [15]-membered ring counterpart. Unfortunately, this strategy did not prove successful, and, consequently, we opted to undertake a transesterification reaction from 23, as a means to accommodate the requisite aminoacid moiety at the correct position, to obtain 24. From 24, and through intermediates 25-28, the acyclic precursor of the [13]-membered ring macrolactone, compound 30, was efficiently prepared. By utilizing the synthetic course developed by Chida, we took 30 forward and completed the total synthesis of stevastelin C3 (3).     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.