Resolving the different dynamics of the fluorine sublattices in the anionic conductor BaSnF(4) by using high-resolution MAS NMR techniques

19F and (119)Sn MAS NMR spectroscopy have been used to investigate the fluoride ion conductor, BaSnF(4), a member of the MSnF(4) family of fluorite-related anionic conductors containing double layers of Sn(2+) and M(2+) cations. Two fluorine sublattices were observed by (19)F MAS NMR, which could be assigned to specific sites in the lattice. The first sublattice is due to fluorine atoms located in Ba(2+) double layers and is rigid on the MAS NMR time scale at room temperature. The second sublattice comprises the fluoride ions between the Ba(2+) and Sn(2+) layers, and the few fluorine atoms that inhabit the Sn(2+)-Sn(2+) double layers. These ions are in rapid exchange with each other, and an extremely short correlation time tau(C) for the motion of these ions of <3 x 10(-)(5) s is obtained at -100 degrees C. T(1) measurements indicate that tau(C) approaches 10(-)(8) s at room temperature. (19)F-to-(119)Sn cross-polarization (CP) experiments confirmed the assignments of the resonances, and that the fluorine atoms located next to the tin atoms are extremely mobile at room temperature (and thus do not contribute to the CP process). Two-dimensional (19)F exchange experiments showed that exchange between the rigid and mobile lattice does occur, but at a much slower rate (tau(C) approximately 10 ms at 250 degrees C). Low-temperature (19)F MAS and (19)F-to-(119)Sn CP NMR spectra demonstrate that the motion of the fluoride ions has almost completely frozen out by -150 degrees C. The results are consistent with rapid two-dimensional (anisotropic) conductivity involving the fluoride ions between the Ba and Sn layers. Conductivity in three dimensions requires hops between the ions in the BaF(2)-like layers and the mobile ions. This process does occur, but with exchange rates that are at least 6-7 orders of magnitude slower.     

Theory of absorption and emission of radiation in molecular collisions: Semiclassical model

A semiclassical transition amplitude is derived for electronically inelastic molecular collisions in the presence of an intense electromagnetic field. The calculation of this amplitude involves the integration of classical trajectories for nuclei moving on effective potential energy surfaces. These surfaces, which exhibit an avoided crossing due to the coupling through the dipole interaction around the resonance nuclear configuration, are analytically continued to their complex intersection points, where trajectories switch surfaces. Other parts of these surfaces are similar to the field-free adiabatic surfaces, where one is shifted by ?ω. Metastable states, formed at some collision energies, are suggested in the field which are absent in the field-free system.     

Intramolecular "Aryl-metal chelate ring" pi,pi-interactions as structural evidence for metalloaromaticity in (aromatic alpha,alpha'-diimine)-copper(II) chelates: molecular and crystal structure of aqua(1,10-phenanthroline)(2-benzylmalonato)copper(II) three-hydrate

By reaction of Cu(2)CO(3)(OH)(2), 2-benzylmalonic acid (H(2)Bzmal), and 1,10-phenanthroline (phen), [Cu(Bzmal)(phen)(H(2)O)] x 3H(2)O (compound 1) has been obtained and characterized by thermal, spectral, magnetic, and X-ray diffraction methods. The molecular structure of 1 is remarkably similar to that of [Cu(Bzmal)(bipy)(H(2)O)] x 2H(2)O (compound 2, bipy = 2,2'-bipyridine). In both complexes, the aryl(Bzmal) ring produces an unexpected pi,pi-stacking interaction with the Cu(II)-(aromatic alpha,alpha'-diimine) chelate ring, at an average distance d(pi)(-)(pi) of 3.40 A, involving roughly parallel and smoothly slipped rings. This insight is discussed as new structural evidence for metalloaromaticity of Cu(II)-(aromatic alpha,alpha'-diimine) chelate rings. Interestingly, 1 recognizes itself by a weak intermolecular pi,pi-stacking interaction between aryl(Bzmal) ligands to give pairs of complex molecules. In contrast, there is an intermolecular pyridyl-pyridyl pi,pi-stacking interaction also forming pairs of complex molecules in 2.     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Reaction de metathese des olefines induite photochimiquement en presence d'un complexe de metal de transition : V. Intervention d'un complexe dinucleaire du tungstene

The photoinduced metathesis [W(CO)₆CCl₄hν] of cis- and trans-RCH=CHMe gives 2-butene in a very high trans but low cis stereoselectivity. Propene behaves like a cis olefin. These results are consistent with the proposal of a dinuclear tungsten intermediate, which requires high steric constraints in the transalkylidenation step.     

Unipolar conductivity of donor or acceptor solutions

Donor or acceptor compounds in apolar organic solvents become charged at a high-field strength electrode and are driven to a surrounding low-field strength electrode of opposite sign. At 10 kV per cm the solutions conduct 3–7 times better when the highly charged electrode is positive in donor solutions. The opposite situation occurs in acceptor solutions.     

Stéréochimie des réactions de substitution des alcoxygermanes par les organolithiens et par les réactifs de Grignard

The reactions of organolithium reagents and Grignard reagents with optically active alkoxygermanes R₃GeOR′ have been studied [R₃GeOR′ = ()-i-PrPhNpGeOCH₃, ()-i-PrPhNPGeOMen and ()-MePhNpGeOMen]. Saturated reagents (e.g. butyllithium) give retention of configuration at germanium whilst unsaturated reagents (e.g. allyl- or benzyllithium) lead to inversion.     

Addition reaction of azido-exTTFs to C60: synthesis of fullerotriazoline and azafulleroid electroactive dyads

[structure: see text] The addition reaction of azido-exTTFs to C(60) affords electroactive fullerotriazoline and azafulleroid dyads, which behave as amphoteric redox systems. Fluorescence experiments and transient absorption spectroscopy reveal that excitation of the fullerene moiety leads to radical pair lifetimes that are 2 orders of magnitude higher than those previously reported for related fullerotriazolines.     

Influence of the Meniscus at the Bottom of the Solid Plate on Imbibition Experiments

The analysis of the experiments on liquid imbibition into porous solids carried out by using the increase of weight technique proves the influence that meniscus formation has on the experimental increase of weight when the bottom of the porous layer is put in contact with the free surface of the liquid used to perform the penetration experiments. This process (meniscus onset) has a temporary dependence due to the change of the distance between the inferior base of the plate and the free surface of the liquid as a result of the imbibition. We have also found the proper experimental conditions under which such temporary dependence can be minimized after a short time after the start of contact between the porous layer and the free surface of the liquid utilized in the penetration procedure. Thus, the weight increase because of the meniscus formation can be assumed as a constant during the greatest part of the experiments, allowing the use of the proper mathematical form of Washburn's equation in order to describe the imbibition of the liquid into the pores of the solid. Copyright 2001 Academic Press.     

Effects of cetylpyridinium bromide micelles on the spectrofluorimetric characteristics of polycyclic aromatic hydrocarbons

The presence of a micellar medium of cetylpyridinium bromide (CPB) causes, in relation to the aqueous medium, important bathochromic shifts in the excitation spectra of a considerable number of polycyclic aromatic hydrocarbons (PAHs). Furthermore, the CPB acts as a quencher, provoking inhibitions of the fluorescence intensity emitted by PAHs. The micellar inhibition factors show that, generally, the quenching affects alternant hydrocarbons to a greater extent. Some interesting relationships between the hydrocarbon structure and both the characteristic wavelengths of fluorescence spectra and the values of Deltalambda are established.