Phenylselenolactonisation des acides homogeranique et homonerique

The reaction of PhSeCl and N-PSP with homogeranic acid ($\text{1}$) or homoneric acid ($\text{2}$) affords butanolides in a stereospecific way. Despite the large number of cyclic cases studied in the literature such acyclic systems were remained largely unexplored. PhSe⁺ was unable to realize polycyclization.     

Kinetics of poly(ethylene terephthalate) glycolysis by diethylene glycol. I. Evolution of liquid and solid phases

The kinetics of uncatalysed glycolysis, at 220 °C, of poly(ethylene terephthalate) (PET) by diethylene glycol (DEG) in high excess has been studied. An experimental device allowing good separation, at reaction temperature, of the solid and liquid phases was set up.The results suggest that PET is initially depolymerized in the slightly swollen solid phase, by glycolysis of the amorphous interlamellar chains. This mechanism continues until a solid phase of highly crystallized polyester is obtained.The internal tensions engendered by this chemical modification cause cracks, delamination and mechanical disintegration of the polymer. The transfer towards the liquid phase is then strongly accelerated and the solvolysis of the depolymerization products continues in the liquid phase, up to equilibrium.     

Approaches to charge calculations in molecular mechanics

Alternative methods of estimating atomic charges in haloalkanes are presented, derived from quantum mechanical and classical treatments. A scheme based on a breakdown of the transmission of charge by polar atoms into one-bond, two-bond, and three-bond additive contributions is given, in which the one-bond effect is proportional to the difference in the electronegativities of the bonded atoms, and the two- and three-bond effects functions of the atomic electronegativity and polarizability. Suitable developments of the basic scheme, including an iterative self-consistent process, give calculated dipole moments for a variety of haloalkanes in good agreement with the observed values. The atomic charges obtained by this scheme are compared with other estimates of these charges. They are similar to those derived from a simple LCAO –MO scheme but differ from those obtained by population analysis of more refined quantum mechanical calculations.     

Synthesis of gold nanorod/single-wall carbon nanotube heterojunctions directly on surfaces

This contribution describes the synthesis of gold nanorod (Au NR)/single-wall carbon nanotube (SWCNT) heterojunctions assembled directly on Si/SiOx substrates. SWCNTs are attached to amine-functionalized Si/SiOx substrates, and Au monolayer-protected clusters (MPCs) are adsorbed to the surface of SWCNTs through hydrophobic interactions. Seed-mediated reduction of HAuCl4 with ascorbic acid in the presence of cetyltrimethylammonium bromide (CTAB) onto the Au MPCs leads to the growth of larger Au nanostructures directly on the SWCNTs. Au NRs account for 19% of the nanostructures, some of which are attached directly to the sidewall and some at the ends of the SWCNTs. Raman spectroscopic measurements of SWCNTs before and after growth of the Au nanostructures reveal that the presence of Au leads to an approximately 50-fold enhancement of the Raman scattering signal. Combining 1D nanostructures of different materials (Au and carbon in this example) is of fundamental interest and may find use in nanoelectronics, chemical sensing, electrochemical, and spectroscopy applications.     

Metallation regioselective en serie pyridinique: Synthese originale d'amino-2 aroyl-3 pyridines

Lithium diisopropylamide reacts with 2-fluoropyridine at low temperature: regioselectivity is excellent and metallation occurs without side reactions such as nucleophilic attack. 2-Fluoro-3-lithiopyridine is formed and with aldehydes it gives the corresponding fluorinated alcohols which are then selectively oxidized. Halogen substitution using amines leads to various 3-oxoalkyl- or 3-aroyl-2-aminopyridines.     

Comparative reactivity of glycols in PET glycolysis

The kinetics of poly(ethylene terephthalate) (PET) glycolysis by diethylene glycol (DEG), dipropylene glycol (DPG), glycerol (Gly) and mixtures of these glycols have been studied with two experimental procedures: uncatalysed at 220 °C and catalysed at 190 °C. An experimental device was set up allowing the isothermal kinetics to be monitored. A precise initial reaction time was obtained by separately warming the glycol and the polyester at the temperature of reaction before mixing them.The reactivity order of different glycols varies according to the conditions of temperature and catalysis. Schematically, the global reactivity does depend not only on the chemical reactivity of the glycol but also on its physico-chemical properties: ability to solvate the solid polyesters and polarity of the reaction mixture. Attempts to find synergic effects failed for almost all mixtures, except the mixture DPG + Gly in which the PET is digested more quickly than in pure DPG or Gly.     

Ca(2.5)Sr(0.5)GaMn2O8: diamagnetic Ga in control of the structural and electronic properties of a bilayered manganate

The temperature dependence of the crystal structure and electronic properties of brownmillerite-like Ca(2.5)Sr(0.5)GaMn(2)O(8) has been studied by neutron powder diffraction and muSR spectroscopy. The results show that short-range 2D magnetic order begins to develop within the perovskite-like bilayers of MnO(6) octahedra approximately 50 K above the 3D Néel temperature of approximately 150 K. The bilayers show a structural response to the onset of magnetism throughout this temperature range whereas the GaO(4) layers that separate the bilayers only respond below the 3D ordering temperature. XANES spectroscopy shows that the sample contains Mn(3+) and Mn(4+) cations in a 1:1 ratio, and the behavior in the region of the Néel transition is interpreted as a local charge ordering. Electron diffraction and high-resolution electron microscopy have been used to show that the local microstructure is more complex than the average structure revealed by neutron diffraction, and that microdomains exist in which the GaO(4) tetrahedra show different orientations. It is argued that the bonding requirements of diamagnetic gallium control the electronic behavior within the perovskite-like bilayers.     

MIL-50, an open-framework GaPO with a periodic pattern of small water ponds and dry rubidium atoms: a combined XRD,NMR, and computational study

A new fluorinated gallium phosphate, MIL-50, has been synthesized under mild hydrothermal conditions using 1,6-diaminohexane. The chemical formula of MIL-50 is Rb(2)Ga(9)(PO(4))(8)(HPO(4))(OH)F(6).2N(2)C(6)H(18).7H(2)O. The structure is a network of hexameric units of Ga(3)(PO(4))(3)F(2) and Ga(3)(PO(4))(2)(HPO(4))F(3) via corner sharing. It creates a three-dimensional open-framework delimiting 6- and 18-ring channels running along the c axis. The diprotonated 1,6-diaminohexane and water molecules are trapped within the 18-ring pores, whereas the rubidium cations reside in the 6-ring ones. A double quantum (31)P NMR experiment and partial charge calculations indicate that water molecules are present under the form of periodic small clusters, lowering the multiplicity of one phosphorus site, P3. Though water hops within the clusters, the motion leaves the water pattern periodic. Rubidium is so tightly embedded into the framework that water moving in the large 18-ring channels does not reach it, leaving it therefore dry. The crystal framework may be ascribed to the orthorhombic space group Cmc2(1) (n degrees 36), a = 32.1510(2), b = 17.2290(3), c = 10.2120(1) A. The periodic water pattern has a different symmetry than that of the framework. A method has been devised to superpose the two sublattices that coexist in the same unit cell in order to have full occupancy of each site and to perform Madelung summations. This original method is of general interest for most zeolitic materials exhibiting a different symmetry for the framework and the template sublattices.     

The future of laboratory automation urgency, technology and strategy

The commercial application of laboratory robotics is entering its eight year. Developments in general purpose computer and software technology combined with developments in laboratory robotics have contributed to significant improvements in performance, reliability, and ease-of-use. The need for high quality laboratory automation continues to increase. Competitive pressure for higher quality and lower cost products and the shrinking supply of qualified technical people demands more effective use of our people resources. This presentation will develop the need for a new role and broader contribution from automation to the laboratory of the future. Specifically, I will discuss the critical decrease in the number of young people embarking on careers in chemistry and science and how automation can help make these career opportunities more challenging and exciting. The second part of the presentation will discuss the evolution of laboratory robotics technology and project some of the trends ahead.     

Complexes formed between nitrilotris(methylenephosphonic acid) and M(2+) transition metals: isostructural organic-inorganic hybrids

Nitrilotris(methylenephosphonic acid) (NTP, [N(CH(2)PO(3)H(2))(3)]) recently has been found to form three-dimensional porous structures with encapsulation of templates as well as layered and linear structures with template intercalation. It was, therefore, of interest to examine the type of organic-inorganic hybrids that would form with metal cations. Mn(II) was found to replace two of the six acid protons, while a third proton bonds to the nitrilo nitrogen, forming a zwitter ion. Two types of compounds were obtained. When the ratio of acid to Mn(II) was less than 10, a trihydrate, Mn[HN(CH(2)PO(3)H)(3)(H(2)O)(3)] (2) formed. Compound 2 is monoclinic P2(1)/c, with a = 9.283(2) A, b = 16.027(3) A, c = 9.7742(2) A, beta = 115.209(3) degrees, V = 1315.0(5) A(3), and Z = 4. The Mn atoms form zigzag chains bridged by two of the three phosphonate groups. The third phosphonate group is only involved in hydrogen bonding. The metal atoms are octahedrally coordinated with three of the sites occupied by water molecules. Adjacent chains are hydrogen-bonded to each other through POH and HN donors, and the additional participation of all the water hydrogens in H-bonding results in a corrugated sheet-like structure. Use of excess NTP at a ratio to metal of 10 to 1 yields an anhydrous compound Mn[HN(CH(2)PO(3)H)(3)] (1), P2(1)/n, a = 9.129(1) A, b = 8.408(1) A, c = 13.453(1) A, beta = 97.830(2) degrees, V = 1023.0(2) A(3), and Z = 4. Manganese is five coordinate forming a distorted square pyramid with oxygens from five different phosphonate groups. The sixth oxygen is 2.85 A from an adjacent Mn, preventing octahedral coordination. All the protonated atoms, three phosphonate oxygens and N, form moderately strong hydrogen bonds in a compact three-dimensional structure. The open-structured trihydrate forms a series of isostructural compounds with other divalent transition metal ions as well as with mixed-metal compositions. This is indicative that the hydrogen bonding controls the type of structure formed irrespective of the cation.