Relative retention of the fibroblast growth factors FGF-1 and FGF-2 on strong cation-exchange sorbents

The isocratic retention of two heparin-binding fibroblast growth factors, FGF-1 (acidic FGF) and FGF-2 (basic FGF), was compared on a set of six preparative strong cation-exchange adsorbents. The FGFs comprise a solute pair that are structurally equivalent, yet differ in protein parameters of potential importance in cation-exchange chromatography, such as isoelectric point, net charge, and the number and distribution of basic amino acids. The cation-exchange adsorbents comprise a diverse set of materials in common use for protein purification, with physical and chemical properties that have been characterized and described previously. Isocratic k' values for the two proteins obtained on each adsorbent at several different [NaCl] are compared with one another and with corresponding data for hen egg lysozyme, which is also strongly retained on cation-exchangers. Of the six adsorbents examined, three showed strong retention of both FGFs, with equivalent k' values for FGF-1 and FGF-2. Three others, which showed weaker overall retention for the FGF pair, showed much larger retention differences between FGF-1 and FGF-2. The trends in retention order among the stationary phases are very similar to those seen previously with other unrelated proteins. However, retention differences between the two FGFs, and between the FGFs and lysozyme, do not correlate well with simple charge properties such as net charge, indicating, as in some previous studies, the importance of local regions on the protein surface in determining retention. These observations are interpreted in terms of the structural features of the proteins and the physicochemical properties of the adsorbents.     

Self-assembly approach toward magnetic silica-type nanoparticles of different shapes from reverse block copolymer mesophases

In the present study poly(isoprene-block-ethylene oxide), PI-b-PEO, block copolymers are used to structure iron oxide and silica precursors into reverse mesophases, which upon dissolution of the organic matrix lead to well-defined nanoparticles of spheres, cylinders, and plates based on the original structure of the mesophase prepared. The hybrid mesophases with sphere, cylinder, and lamellar morphologies containing the inorganic components in the minority phases are characterized through a combination of small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), and electron energy loss spectroscopy (EELS). After heat treatments the respective nanoparticles on mica surfaces are characterized by scanning force microscopy (SFM). X-ray diffraction (XRD) and superconducting quantum interference device (SQUID) magnetometer measurements are performed to demonstrate that the heat treatment leads to the formation of a magnetic gamma-Fe2O3 crystalline phase within the amorphous aluminosilicate. The results pave the way to functional, i.e., magnetic nanoparticles where the size, shape, and iron oxide concentration can be controlled opening a range of possible applications.     

Crystallization and melting of polyethylene copolymers: Differential scanning calorimetry and atomic force microscopy studies

The Hoffman–Lauritzen theory of secondary, surface nucleation and growth was primarily relied upon for about 40 years after its introduction in about 1960 to rationalize the crystallization of flexible chain polymers into lamellar crystals. However, in about 1998, Strobl and coworkers introduced a different model for crystallization, based on the stage‐wise formation of lamellae. Two major components of this model were as follows: (1) the concept of the formation of a mesomorphic melt as a precursor to crystallization and (2) the control of the melting temperature range of lamellar crystals of homogeneous polyolefin copolymers by an inner degree of order or perfection rather than on the crystal thickness. The first concept is in disagreement with the HL theory and the second with the Gibbs‐Thomson theory, which associates melting temperature with lamella thickness. In the present study, differential scanning calorimetry and atomic force microscopy were successfully employed to monitor the in situ quiescent crystallization of polyethylene homopolymer and copolymer. In the present study, evidence was not found to support the concept of lamellae with equal thickness melting over a broad temperature range. Some evidence was found that might be interpreted to support the concept of a mesomorphic melt as a precursor to crystallization. At present, the model promoted by Strobl and coworkers appears to be at an uncertain stage at which strong proof or disproof are not available. However, this alternative model has injected a new vitality into the study of crystallization of flexible chain polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2369–2388, 2006     

Phospholipid coated poly(lactic acid) microspheres for the delivery of LHRH analogues

The aim of this work was to develop alternative peptide‐loaded microspheres using liposphere formulation—a lipid based microdispersion system. This formulation represents a new type of lipid or polymer‐based encapsulation system developed for parenteral and topical drug delivery of bioactive compounds. Our strategy was to utilize the liposphere formulation to improve the entrapment efficiency and release profile of triptorelin and leuprolide [luteinizing hormone–releasing hormone (LHRH) analogues] in vitro. Peptides (2% w/w) were loaded into lipospheres contained of polylactic acid (PLA) or poly(lactic‐co‐glycolic acid) (PLGA) with several types of phospholipids. The effects of polymer and phospholipid type and concentration, method of preparation and solvents on the liposphere characteristics, particle size, surface and bulk structure, drug diffusion rate, and erosion rate of the polymeric matrix were studied. The use of L ‐PLA (M_w = 2000) and hydrogenated soybean phosphatidylcholine (HSPC) with phospholipid–polymer ratio of 1 : 6 w/w, was the most efficient composition that formed lipospheres of particle size in the range of 10 µm with most of the phospholipid embedded on the particles surface. In a typical procedure, peptides were dissolved in N‐methyl‐2‐pyrrolidone (NMP), and dispersed in a solution of polymer and phospholipids in a mixture of NMP and chloroform with the use of 0.1% poly(vinyl alcohol) (PVA) as the emulsified aqueous medium. Uniform microspheres were prepared after solution was mixed at 2000 rpm at room temperature for 30 min. Using this formulation, the entrapment efficiency of LHRH analogues in lipospheres was up to 80%, and the peptides were released for more than 30 days. Copyright © 2002 John Wiley & Sons, Ltd.     

La3Os2O10, a new compound containing isolated clusters Os2O10 with metal-metal bonds

The formula of a new compound isolated in the LaOsO system has been established by means of crystal structure determination. There are two La₃Os₂O₁₀ units in a face-centered monoclinic unit cell (S.G. $\text{C2}\text{m}$); a = 7.911(2) Å, b = 7.963(2) Å, c = 6.966(2)Å, β = 115.76(2)°;. For 1082 intensities, collected on an automated single-crystal diffractometer, the final R value was 0.025 after absorption corrections. The structure consists of isolated Os₂O₁₀ clusters composed of two edge-shared OsO₆ octahedra. These dimeric units are connected together by two types of La³⁺ ions in eightfold coordination. In view of the OsOs distance inside the pair (2.462 Å), La₃Os₂O₁₀ provides an example of metal-metal bonding involving a transition metal in a half-integral formal oxidation state of 5.5.     

Novel Mo(V)-dithiolene compounds: characterization of nonsymmetric dithiolene complexes by electrospray ionization mass spectrometry

Three new Mo(V) dithiolene compounds have been synthesized by addition of alkynes ((Me(3)Si)(2)C(2) (TMSA), (Me(3)Si)(2)C(4), and (Ph)(2)C(4) to MoO(2)S(2)(2-) in a MeOH/NH(3) mixture: [Mo(2)(O)(2)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)H(2))](2)(-) 1, [Mo(2)(O)(X)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)Ph(C(2)Ph))](2-) 2 (X = O or S), and [Mo(2)(O)(2)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)H(C(2)H))](2-) 3. The structure of 1 as determined by single-crystal X-ray diffraction study (space group Pbca, a = 13.3148(1) A, b = 15.7467(4) A, c = 28.4108(7) A, V = 5956.7(2) A(3)) is discussed. 2 and 3 have been identified by ESMS (electrospray mass spectrometry), (1)H NMR, (13)C NMR, and infrared spectroscopies. This investigation completes our previous study devoted to the addition of DPA (C(2)Ph(2)) to MoO(2)S(2)(2-) which led to [Mo(2)(O)(X)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)Ph(2))](2-) 4 (X = O or S). A reaction scheme is proposed to explain the formation of the different species present in solution. The reactivity of the remaining nucleophilic site of these complexes (eta(2)-S(2)) toward dicarbomethoxyacetylene (DMA) is also discussed.     

Asymmetric conjugate addition of thioglycolate to a range of chalcones using tetrahydroisoquinoline (TIQ) N,N′-dioxide ligands

A series of novel TIQ based N,N′-oxide ligands were synthesised and screened for their catalytic activity in the enantioselective conjugate addition of thioglycolate to chalcones. Bulky groups on the side chain of the TIQ backbone provided the highest enantioselectivity of up to 88% with 10 mol % catalyst loading. It was also observed that these reactions proceeded optimally in the presence of dichloromethane as a solvent. Screening of various metals emphasized La(OTf)₃ as the ideal pre-catalyst for this particular reaction.     

A Convenient Synthesis of Chiral Oxazolidin-2-Ones and Thiazolidin-2-Ones and an Improved Preparation of Triphosgene

Oxazolidin-2-ones and thiazolidin-2-one are conveniently prepared by condensation of L-serine, L-threonine and L-cysteine, respectively with triphosgene. The corresponding methyl esters may be subsequently obtained by quenching the reaction mixture with methanol, without prior need for the isolation of the free acids. An improved procedure for preparation of triphosgene using an internal cooling system is described.