Recent developments in the synthesis and functionalization of conducting poly(thiophenes)

The mechanism of the electropolymerization of thiophene derivatives has been investigated by varying the electrosynthesis conditions and the monomer structure. The results of these analyses led to the definition of optimized electrosynthesis conditions allowing the control of the electrical and electrochemical properties of poly(thiophenes). On the basis of these results, the properties of these polymers have been modified by means of a new one-step electrosynthesis of conducting composite materials and by the direct electropolymerization of tailor-made functionalized monomers. For this purpose, the steric conditions associated to the various possibilities of covalent derivatization have been analyzed, leading to the definition of a “functionalization space”, compatible with the preservation of high conductivity and electrochemical reversibility in the resulting polymers. This concept has been applied to the synthesis of highly conducting chiral poly(thiophenes) on which an effect of enantioselective molecular recognition has been demonstrated for the first time.     

The Varietal Influence of Flavour Precursors from Grape Marc on Monoterpene and C13-Norisoprenoid Profiles in Wine as Determined by Membrane-Assisted Solvent Extraction (MASE) GC-MS

The winemaking by-product grape marc (syn. pomace) contains significant quantities of latent flavour in the form of flavour precursors which can be extracted and used to modulate the volatile composition of wine via chemical hydrolysis. Varietal differences in grapes are widely known with respect to their monoterpene content, and this work aimed to extend this knowledge into differences due to cultivar in volatiles derived from marc precursors following wine-like storage conditions. Marc extracts were produced from floral and non-floral grape lots on a laboratory-scale and from Muscat Gordo Blanco marc on a winery -scale, added to a base white wine for storage over five to six months, before being assessed using a newly developed membrane-assisted solvent extraction gas chromatography-mass spectrometry (GC-MS) method. The geraniol glucoside content of the marc extracts was higher than that of juices produced from each grape lot. In all wines with added marc extract from a floral variety, geraniol glucoside concentration increased by around 150–200%, with increases also observed for non-floral varieties. The relative volatile profile from extracts of the floral varieties was similar but had varied absolute concentrations. In summary, while varietally pure extracts would provide the greatest control over flavour outcomes when used in winemaking, aggregated marc parcels from floral cultivars may provide a mechanism to simplify the production logistics of latent flavour extracts for use in the wine sector.     

Astringency Sensitivity to Tannic Acid: Effect of Ageing and Saliva

Astringency is an important sensory characteristic of food and beverages containing polyphenols. However, astringency perception in elderly people has not been previously documented. The aim of the present work was to evaluate sensitivity to astringency as a function of age, salivary flow and protein amount. Fifty-four panellists, including 30 elderly people (age = 75 ± 4.2 years) and 24 young people (age = 29.4 ± 3.8 years), participated in this study. Astringency sensitivity was evaluated by the 2-alternative forced choice (2-AFC) procedure using tannic acid solutions. Whole saliva was collected for 5 min before and after the sensory tests. The results showed that the astringency threshold was significantly higher in the elderly group than the young group. No correlation was observed between the salivary protein amount and threshold value. However, a negative correlation between salivary flow and threshold was observed in the young group only. These results showed a difference in oral astringency perception as a function of age. This difference can be linked to salivary properties that differ as a function of age.     

A high-throughput search for direct methanol fuel cell anode electrocatalysts of type PtxBiyPbz

We used a high-throughput method to screen for direct methanol fuel cell anode electrocatalysts in the Pt-Bi-Pb system. Previous studies showed that PtBi and PtPb (both NiAs structure type) were active electrocatalysts for the oxidation of formic acid, but only PtPb was active in oxidizing methanol. We synthesized thin films with continuous composition spreads of the three elements by magnetron sputtering at deposition temperatures from ambient to 510 °C. A fluorescence method was then used to identify compositions that were active toward methanol oxidation. Only films deposited between temperatures of 160 and 400 °C showed electrocatalytic activity. The areas that were active for methanol oxidation showed predominantly the NiAs structure type according to XRD, with optimal activity for compositions near PtBi_0.01Pb_0.53.     

Synchronization of impulsively coupled complex systems with delay

This paper investigates the synchronization of complex systems with delay that are impulsively coupled at discrete instants only. Based on the comparison theorem of impulsive differential system, a distributed impulsive control scheme is proposed to achieve the synchronization for systems with delay. In the control strategy, the influence of all nodes to network synchronization relies on its weight. The proposed control scheme is applied to the chaotic delayed Hopfield neural networks and numerical simulations are presented to demonstrate the effectiveness of the proposed scheme.     

Efficiency in integral facility design problems

An example of design might be a warehouse floor (represented by a setS) of areaA, with unspecified shape. Givenm warehouse users, we suppose that useri has a known disutility functionf _isuch thatH _i(S), the integral off _iover the setS (for example, total travel distance), defines the disutility of the designS to useri. For the vectorH(S) with entriesH _i(S), we study the vector minimization problem over the set {H(S) :S a design} and call a design efficient if and only if it solves this problem. Assuming a mild regularity condition, we give necessary and sufficient conditions for a design to be efficient, as well as verifiable conditions for the regularity condition to hold. For the case wheref _iis thel _p-distance from warehouse docki, with 1<p<, a design is efficient if and only if it is essentially the same as a contour set of some Steiner-Weber functionf =₁ f ₁++ _m f _m ,when the _i are nonnegative constants, not all zero.This research was supported in part by the Interuniversity College for PhD Studies in Management Sciences (CIM), Brussels, Belgium; by the Army Research Office, Triangle Park, North Carolina; by a National Academy of Sciences-National Research Council Postdoctorate Associateship; and by the Operations Research Division, National Bureau of Standards, Washington, D.C. The authors would like to thank R. E. Wendell for calling Ref. 16 to their attention.     

Modeling of MIG/MAG welding with experimental validation using an active contour algorithm applied on high speed movies

This paper investigates some issues in physical modeling of metal inert gas/metal active gas (MIG/MAG) welding process in the short arc mode. In this mode, a metal supply is molten in the arc state and then transferred to the weld pool during the short-circuit state. A hybrid model having two distinct continuous states whose switchings are controlled by two guard conditions is proposed. Due to the complexity of the physical phenomena involved in the welding process, simplifications are used to obtain a model accounting for the main physical contributions but simple enough to yield an efficient, fast and numerically tractable simulator which can be used intensively for evaluating different control strategies. In an attempt to validate the proposed model, different measurements have been made including supply voltage and current sampled synchronously with high speed digital video. In order to extract some relevant quantities representative of the metal transfer from image sequences, an active contour algorithm is developed and tested. The effectiveness of the proposed model in the prediction of major tendencies of a welding process, especially in the arc state, is shown using experimental data. Some limitations of the model during the metal transfer are also stressed and possible remedies are then proposed.     

Fano effect in a T-shaped double quantum dot structure in the presence of Rashba spin-orbit coupling

The influence of Rashba spin-orbit coupling on the Fano lineshape of the conductance spectrum in a T-shaped double quantum dot structure is theoretically studied. By second-quantizing the electron Hamiltonian in this structure, it is found that the Rashba interaction brings about a spin-flip interdot hopping term. With the enhancement of the Rashba interaction, this term separates the two resonant peaks in the conductance spectrum from each other. More importantly, it causes the broadening of the narrow Fano peak, and the narrowing of the broader peak. Finally, the asymmetric Fano lineshape changes into a symmetric profile in the global conductance spectrum.     

Experimental Investigations on the Thermal Diffusion Characteristics and Photoluminescence in Multiphase Micro Fluids Containing ZnO Micro Tubes and Fluorescein Dye

Optics and Spectroscopy - Scattering of light by disordered structures is normally detrimental to their applicability in many optoelectronic devices. However, some micro and nanostructures are...     

A Practical Solution to a Cargo Loading Problem at Bethlehem Steel

The optimum assignment of structural steel shapes to rail cars is an important logistical problem in the steel industry. In this paper, we discuss an application at Bethlehem Steel that not only involves weight and dimensional constraints, but also customer unloading constraints. The formulation is a generalized bin packing problem which is solved by modifying and extending the first fit decreasing algorithm. The solution algorithm, SOLID (for Structural Optimal Loading IDentification), has been used extensively for one of Bethlehem's high tonnage customers providing very good practical (implementable) results that achieve the desired goals. Bethlehem has enhanced this approach for use with other customers.