The effects of cationic and zwitterionic micelles on the keto-enol interconversion of 2-phenylacetylfuran and 2-phenylacetylthiophene

The presence of micelles from cationic and zwitterionic surfactants increases the apparent acidity of either the keto and the enol forms of 2-phenylacetylfuran (2PAF) and 2-phenylacetylthiophene (2PAT). This effect can be attributed to the affinity of the surfactant micelles for the enolate of the two substrates. Although the equilibrium constants for keto-enol tautomerism of 2PAF and 2PAT, K_T=[enol]/[ketone]=pK_a^KH−pK_a^EH, do not change much, the presence of micelles provides an efficient method for producing appreciable quantities of the enolates under mild experimental conditions and in aqueous solutions. The obtained rate-profiles for the ketonisation reactions and the consistency of the kinetic rate constants over a wide range of ‘pH’ in several overlapping buffers indicate that the pH of the aqueous pseudophase (but not that at the micellar surface) can be controlled by buffers. Moreover, the increase of the acidity and the decrease of the ‘water’ rate of ketonisation of the enols of 2PAF and 2PAT upon addition of surfactants allow the uncovery of a metal ion catalysed pathway that cannot be observed in absence of surfactants.     

Determination of lead in the urine of exposed and unexposed adults by extraction and flow-injection/atomic absorption spectrometry

Lead is extracted from urine with ammonium pyrrolidien dithiocrbamate into methyl isobutyl ketone, and 20 μl of the extract is injected into a water carrier stream in a flow-injection/atomic absorption system. The procedure is simple, quick, accurate and reproducible. Recoveries are 96–105%. The mean urine lead contents of 20 unexposed and 20 printing-press lead exposed workers was found to be 39.0 ± 8.3 and 71.7 ± 26.3 μg Pb l^?1, respectively.     

Rheological behavior and structural interpretation of waxy crude oil gels

A waxy crude oil which gels below a threshold temperature has been investigated under static and dynamic conditions, using a combination of rheological methods, optical microscopy, and DSC. Particular attention is given in this work to the influence of the mechanical history on gel strength and to describing the time-dependent rheological behavior. The gels display a strong dependence of the yield stress and moduli on the shear history, cooling rate, and stress loading rate. Of particular interest is the partial recovery of the gel structure after application of small stress or strain (much smaller than the critical values needed for flow onset) during cooling, which can be used to reduce the ultimate strength of the crude oil gel formed below the pour point. A second focus of this study is to further develop the physical interpretation of the mechanism by which wax crystallization produces gelation. Gelation of the waxy crude oil studied is suggested to be the result of the association between wax crystals, which produces an extended network structure, and it is shown that the system displays features common to attractive colloidal gels, for one of which, fumed silica (Aerosil 200) in paraffin oil, rheological data are reported. The colloidal gel model provides a simple and economical basis for explaining the response of the gelled oil to various mechanical perturbations and constitutes a fruitful basis from which to develop technologies for controlling the gelation phenomenon, as suggested by the rheological results reported.     

Spectroscopy and quantum chemical modeling reveal a predominant contribution of excitonic interactions to the bathochromic shift in alpha-crustacyanin, the blue carotenoprotein in the carapace of the lobster Homarus gammarus

To resolve the molecular basis of the coloration mechanism of alpha-crustacyanin, we used (13)C-labeled astaxanthins as chromophores for solid-state (13)C NMR and resonance Raman spectroscopy of [6,6',7,7']-(13)C(4) alpha-crustacyanin and [8,8',9,9',10,10',11,11',20,20']-(13)C(10) alpha-crustacyanin. We complement the experimental data with time-dependent density functional theory calculations on several models based on the structural information available for beta-crustacyanin. The data rule out major changes and strong polarization effects in the ground-state electron density of astaxanthin upon binding to the protein. Conformational changes in the chromophore and hydrogen-bond interactions between the astaxanthin and the protein can account only for about one-third of the total bathochromic shift in alpha-crustacyanin. The exciton coupling due to the proximity of two astaxanthin chromophores is found to be large, suggesting that aggregation effects in the protein represent the primary source of the color change.     

Are ring currents still useful to rationalize the benzene proton magnetic shielding?

[structure: see text] The conventional interpretation of proton NMR chemical shifts is supported by large basis set ab initio quantum mechanical calculations. The benzene protons are predicted to lie within the deshielding zone defined in terms of the out-of-plane magnetic shielding domain. However, ring currents by themselves are not sufficient to account quantitatively for the observed benzene proton downfield chemical shift. sigma-Electron contributions must also be taken into account. The conventional explanation for the ethyne proton chemical shift is valid.     

A minimal multiconfigurational technique

A direct minimization method previously presented by the authors is applied here to biconfigurational wave functions. A very moderate increasing in the time by iteration with respect to the one-determinant calculation and good convergence properties have been found. So qualitatively correct studies on singlet systems with strong biradical character can be performed with a cost similar to that required by Hartree-Fock calculations.     

Progress,highlights and perspectives on NiO in perovskite photovoltaics

The power conversion efficiency (PCE) of NiO based perovskite solar cells has recently hit a record 22.1% with a hybrid organic–inorganic perovskite composition and a PCE above 15% in a fully inorganic configuration was achieved. Moreover, NiO processing is a mature technology, with different industrially attractive processes demonstrated in the last few years. These considerations, along with the excellent stabilities reported, clearly point towards NiO as the most efficient inorganic hole selective layer for lead halide perovskite photovoltaics, which is the topic of this review. NiO optoelectronics is discussed by analysing the different doping mechanisms, with a focus on the case of alkaline and transition metal cation dopants. Doping allows tuning the conductivity and the energy levels of NiO, improving the overall performance and adapting the material to a variety of perovskite compositions. Furthermore, we summarise the main investigations on the NiO/perovskite interface stability. In fact, the surface of NiO is commonly oxidised and reactive with perovskite, also under the effect of light, thermal and electrical stress. Interface engineering strategies should be considered aiming at long term stability and the highest efficiency. Finally, we present the main achievements in flexible, fully printed and lead-free perovskite photovoltaics which employ NiO as a layer and provide our perspective to accelerate the improvement of these technologies. Overall, we show that adequately doped and passivated NiO might be an ideal hole selective layer in every possible application of perovskite solar cells.

The power conversion efficiency of NiO based perovskite solar cells has recently hit a record 22.1%. Here, the main advances are reviewed and the role of NiO in the next breakthroughs is discussed.     

The fast CI method for second-order properties

Second-order properties are computed by diagonalizing a perturbed hamiltonian in a linear space L of low dimensionality. The choice of the basis vectors generating L is suggested by perturbation theory and previous work on correlation energy. Diagrammatic techniques can be used to compute the relevant matrix elements. Test numerical computations performed on the hydrogen molecule gave satisfactory results for the dipole polarizability and nuclear spin-spin coupling constant.     

Circular‐Dichroism Studies on Artemisinin and Epiartemisinin and Their β‐Cyclodextrin Complexes in Solution

The circular dichroism (CD) spectra of the powerful antimalarian active principle artemisinin (ART; 1 ) from Artemisia annua, and of epiartemisinin (EPI, 2), its C(7) epimer, were studied in solution in the presence and absence of β‐cyclodextrin (β‐cd). A significant inversion of sign in the region of the second electronic transition was detected. The rotational strengths were successfully calculated within the time‐dependent density functional theory (DFT), which enabled us to establish a correlation between the molecular recognition and the biological acitivities of the two isomers.     

Comparisons of NMR spectral quality and success in crystallization demonstrate that NMR and X-ray crystallography are complementary methods for small protein structure determination

X-ray crystallography and NMR spectroscopy provide the only sources of experimental data from which protein structures can be analyzed at high or even atomic resolution. The degree to which these methods complement each other as sources of structural knowledge is a matter of debate; it is often proposed that small proteins yielding high quality, readily analyzed NMR spectra are a subset of those that readily yield strongly diffracting crystals. We have examined the correlation between NMR spectral quality and success in structure determination by X-ray crystallography for 159 prokaryotic and eukaryotic proteins, prescreened to avoid proteins providing polydisperse and/or aggregated samples. This study demonstrates that, across this protein sample set, the quality of a protein's [15N-1H]-heteronuclear correlation (HSQC) spectrum recorded under conditions generally suitable for 3D structure determination by NMR, a key predictor of the ability to determine a structure by NMR, is not correlated with successful crystallization and structure determination by X-ray crystallography. These results, together with similar results of an independent study presented in the accompanying paper (Yee, et al., J. Am. Chem. Soc., accompanying paper), demonstrate that X-ray crystallography and NMR often provide complementary sources of structural data and that both methods are required in order to optimize success for as many targets as possible in large-scale structural proteomics efforts.