Mechanism of silver-promoted ligand metathesis in square-planar complexes of d(8) Ions. Kinetics of formation and molecular structures of a trinuclear intermediate [(Me)(N-N)Pt(mu-Cl)Ag(mu-Cl)Pt(N-N)(Me)](+) and its dinuclear evolution product [(Me)(N-N)Pt(mu-Cl)Pt(N-N)(Me)](+) (N-N = ArN=C(Me)C(Me)=NAr,Ar = 2,6-(i-Pr)(2)C(6)H(3))

The silver-assisted ligand metathesis reaction involving a platinum(II) complex of formula [PtClMe(N,N-chelate)] with acetonitrile has been investigated. By using a suitably hindered N,N-chelate, an otherwise hardly detectable trinuclear species has been isolated and characterized through X-ray diffractometry. The trinuclear cation consists of two nearly orthogonal [PtCl(Me)(N,N-chelate)] square-planar units entrapping an Ag(+) cation through the chloride ligands that, acting as bidentate, form a linear AgCl(2) unit with two nonequivalent Ag-Cl bonds. The residual acidity of the silver cation is satisfied by one secondary Ag-Pt interaction [Ag-Pt(1) = 2.82 A] in which the platinum atom acts as a donor. Kinetic studies have demonstrated that the silver assistance operates both through a simple associative step and through a pathway in which the above trinuclear complex is an active intermediate. In a noncoordinating solvent the latter species evolves with AgCl loss and formation of a dinuclear Pt,Pt complex showing a rare single chloride bridge.     

Trinuclear heterobimetallic complexes with binucleating dithioxamides: stereoselective synthesis and solution behavior involving Pd-N bond rupture

Bischelate platinum(II) complexes of the type [Pt(H-R(2)-N(2)C(2)S(2))(2)] (H-R(2)-N(2)C(2)S(2)(-) = dialkyl-dithioxamidate) are ditopic receptors which, after coordination of the first Pd(eta(3)-allyl)(+) moiety, induce the orientation of the second palladium-allyl fragment. Thus, a series of trimetallic complexes of formula bis-[(eta(3)-allyl)-palladium(II)](mu-bis-dialkyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been prepared in which the allyl fragments are oriented toward the same side of the molecular plane. We have also prepared the trimetallic complex using a dithioxamide obtained from the racemic phenylethylamine. Only two isomers were produced in equimolar ratio: the racemate that has four homochiral alkyl substituents and the mesoform containing the meso-dithioxamide that has homochiral substituents on the same side of molecular plane. Under the effect of the temperature, the trimetallic Pd-Pt-Pd complexes undergo rapid allyl isomerization; the mechanism of the isomerization, which is similar to that found by us in an analogue Pt-Pd bimetallic complex, is discussed. The crystal and molecular structure of bis-[(eta(3)-allyl)-palladium(II)](mu-bis-[S]-phenylethyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been reported.     

GC-MS in space research: decoding complex isothermal chromatograms recovered from space missions

An analytical procedure is described to study GC-MS isothermal chromatograms simulating those recovered from space missions: in fact GC plays a predominant role in space missions devoted to characterizing the chemical composition of extra-terrestrial atmospheres. SIM (selected ion monitoring) detection was used for monitoring selected chemical classes: a simplified chromatogram can be obtained giving information on the chemical composition of the complex mixture. Since only isothermal GC chromatograms are allowed by flight constraints, a time axis transformation is required to make them homogeneous: i.e., constant retention increments for CH2 additions in terms of a homologous series. The order in the linearized chromatogram can be simply singled out with a chemometric approach based on the study of the Autocovariance Function (ACVF) computed on the digitized chromatogram: the plot of the experimental autocorrelation function (EACF) shows well-shaped peaks if constant interdistances are repeated in different regions of the chromatogram. The method was applied to standard mixtures representative of planetary atmospheres--hydrocarbons, nitriles and oxygenated compounds with between 3 and 12 carbon atoms--analyzed in flight simulating conditions. The coupling of the selectivity of SIM detection with the interpretation power of the EACF procedure proves to be a powerful tool for interpreting data recovered from space missions: the chemical composition of the mixture can be identified by handling the raw SIM chromatograms.     

One-step synthesis of 2,6-lutidine from acetone, ammonia and methanol. Choice of catalyst and reaction conditions

A screening and optimization procedure carried out on more than 40 different oxide mixtures showed that amorphous silica-alumina (7525 by weight), impregnated with Sb and Cu oxides (10 wt.%) is a convenient catalyst for the title reaction at 650–750 K. During reaction, Sb³⁺ and Cu²⁺ ions are slowly reduced to Sb⁰ and Cu⁺ or Cu⁰, respectively. However, a simple treatment in oxygen can easily regenerate the catalyst.     

Synthesis and photoluminescent properties of 1,1'-binaphthyl-based chiral phenylenevinylene dendrimers

New chiral, soluble binaphthyl derivatives that incorporate stilbenoid dendrons at the 6,6'-positions have been prepared. The synthesis of the new enantiopure dendrimers was performed in a convergent manner by Horner-Wadsworth-Emmons (HWE) reaction of the appropriately functionalized 1,1'-binaphthyl derivative (R)-1 and the appropriate dendrons (R)(2n)G(n)-CHO. Different electroactive units were incorporated in the peripheral positions of the dendrons in order to tune both the optical and electrochemical behavior of these systems. Fluorescence measurements on the chiral dendrimers reveal a strong emission with maxima between 409 and 508 nm depending upon the substitution pattern. Finally, the redox properties of the dendrimers were determined by cyclic voltammetry, showing the influence of the functional groups at the peripheral positions of the dendrimer on the redox behavior of these systems.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

The CuII−CuI−Cu0(Hg) system in the presence of benzotriazole: Part II. A chronocoulometric investigation

Both the oxidation of Cu⁰ at dropping amalgam electrodes immersed in solutions of benzotriazole (BTA) and the reduction of Cu^II at a dropping mercury electrode from BTA solutions have been investigated by the single potential-step chronocoulometric technique. The dependence of the charge Q(t) flowing as a consequence of a given potential jump E_i→E_f upon the initial and final potentials E_i and E_f, as well as upon the time t elapsed from the instant of the potential jump provides direct evidence for the presence of a single adsorbed monolayer of a Cu^I compound on a mercury electrode immersed in a Cu^II solution containing BTA, at applied potentials positive to ≈?0.4 V/SCE. Analogous measurements carried out at dropping amalgam electrodes reveal the presence of a single adsorbed monolayer of a Cu^I compound, or else of an adsorbed multilayer, depending on the potential range investigated. The results of the chronocoulometric measurements are in agreement with those of the polarographic measurements of Part I.     

Studies on decarboxylation reactions. Part 6 . Kinetic study of decarboxylation of 5-amino-1,3,4-oxadiazole-2-carboxylic acid and its N-phenyl derivatives at high hydrochloric acid concentrations

The dissociation constants (K₁) of both acids 4a-c and esters 5a-c and the rate constants of the decarboxylation reaction of acids 4a-c have been measured at various high concentrations of hydrochloric acid (0.5-8.0 M range). The results obtained have enabled us to suggest the probable structure of the zwitterion which undergoes decarboxylation.     

Molecular mechanics and dynamics of biomolecules using a solvent continuum model

An easy implementation of molecular mechanics and molecular dynamics simulation using a continuum solvent model is presented that is particularly suitable for biomolecular simulations. The computation of solvation forces is made using the linear Poisson-Boltzmann equation (polar contribution) and the solvent-accessible surface area approach (nonpolar contribution). The feasibility of the methodology is demonstrated on a small protein and a small DNA hairpin. Although the parameters employed in this model must be refined to gain reliability, the performance of the method, with a standard choice of parameters, is comparable with results obtained by explicit water simulations. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1830-1842, 2001