Characterization of foxing stains in early twentieth century photographic and paper materials

Abstract

The subject of this present work is a group of nine historical pictures shot in Palermo by the Sicilian photographer E. Interguglielmi in 1912. They are nine matte-collodion prints mounted on the original cardboard supports and all of them show foxing stains affecting the paper surface. In order to characterise the chemical composition of the supports and investigate foxing spots, non-destructive and micro-destructive analysis were carried out. X-rays fluorescence (XRF) analysis was used to characterise the elemental composition of all the mounting boards, allowing a comparison between the foxing spots and non-affected areas. Laser-Induced Breakdown Spectroscopy was used to investigate the presence of lower atomic number elements, not detectable by XRF, while SEM imaging allowed the investigation of surface appearance and nature of original paper samples from the cardboards.     

Application of microemulsions for the removal of synthetic resins from paintings on canvas

Abstract

Traditional cleaning methods with organic solvents often are not suitable for removal of aged resin so researchers have to find new formulations. In this work, a case study is reported in which new microemulsions were applied on the surface of a painting covered by some aged resin layers used during a previous restoration. Based on the quality of the intervention and the analysis of a sample of the varnish carried out with both MALDI-TOF and ATR-IR spectrometers, it was conjectured that this undesired material could be an acrylic polymer. So it was chosen to use xylene, ethyl acetate and propylene carbonate (XYL and EAPC) microemulsions (O/W oil in water). The first is able to solubilise only acrylic polymers, the second may solve both acrylic and vinyl resins. The first has had the greatest effect allowing complete varnish removal and original artwork restoration.     

Surface and volume non-invasive methods for the structural monitoring of the bass-relief ‘Madonna con Bambino’ (Gorizia,Northern Italy)

Abstract

Structural analysis of marble statues, carried out by non-invasive and in situ methods, is crucial to define the state of conservation of the artworks and to identify the deterioration phenomena that can affect them. In this work, we combined in situ non-destructive techniques, ultrasonic tomography (US), ultraviolet-induced visible fluorescence (UV-IF) and X-ray fluorescence (XRF) to study the bass-relief ‘Madonna con Bambino’ (Gorizia, Italy). The US revealed the presence of some metallic pivots, associated with areas of high sound velocity; moreover, a more degraded area has been identified in the lower part of the bass-relief. The acquired UV-IF image confirmed the presence of surface degradation, allowing a preliminary evaluation of the extension of a fracture, from surface to bulk. In addition, the different materials (both original and/or integrations) that compose the studied surface have been identified. The XRF has contributed to define the nature of the inorganic materials applied during undocumented previous restoration works on the surface as filler for lacunae.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.     

Colloidally Stable CdS Quantum Dots in Water with Electrostatically Stabilized Weak-Binding,Sulfur-Free Ligands

Colloidal quantum dot (QD) photocatalysts have the electrochemical and optical properties to be highly effective for a range of redox reactions. QDs are proven photo-redox catalysts for a variety of reactions in organic solvents but are less prominent for aqueous reactions. Aqueous QD photocatalysts require hydrophilic ligand shells that provide long-term colloidal stability but are not so tight-binding as to prevent catalytic substrates from accessing the QD surface. Common thiolate ligands, which also poison many co-catalysts and undergo photo-oxidative desorption, are therefore often not an option. This paper describes a framework for the design of water-solubilizing ligands that are in dynamic exchange on and off the QD surface, but still provide long-term colloidal stability to CdS QDs. The binding affinity and inter-ligand electrostatic interactions of a bifunctional ligand, aminoethyl phosphonic acid (AEP), are tuned with the pH of the dispersion. The key to colloidal stability is electrostatic stabilization of the monolayer. This work demonstrates a means of mimicking the stabilizing power of a thiolate-bound ligand with a zwitterionic tail group, but without the thiolate binding group.     

Characterization of the surface interacting ability of carbon black by means of electron paramagnetic resonance analysis of adsorbed Cu2+, supported by surface analysis and atomic absorption

Electron paramagnetic resonance (EPR) has been used to investigate the adsorption capability and the surface interacting ability towards Cu(II) solutions (CuCl2, Cu(NO3)2, CuSO4 in water or ethanol) of various carbon blacks, both graphitized and ungraphitized, selected on the basis of the surface area, namely, Carbograph1 (area = 100 m2/g), Carbograph4 (area = 210 m2/g), and Carbograph5 (area = 560 m2/g), which were indicated as C1g, C4g, C5g (g = graphitized), and C1ng, C4ng, C5ng (ng = ungraphitized). The EPR analysis was supported by surface analysis, for evaluating the surface area, the pore volume and the porosity, and by atomic absorption to obtain the adsorbed Cu(II) amounts. Graphitization provokes a decrease in surface area, but C1g, at low surface area, showed a unexpected increase of the adsorption ability ascribed to the formation of new surface porosity closed by graphite layers. The carbon samples showed a broad unresolved EPR signal due to mobile unpaired electrons in the carbon matrix. Graphitized samples presented a narrower signal than ungraphitized samples, which increases in width with the increase in surface area (with the exception of C5ng due to the high exposition of the wide surface to oxydizing external agents) and upon prolonged thermal treatment. The signal intensity of the carbon paramagnetic centers decreases upon Cu(II) adsorption. Computer aided analysis of the EPR spectra of the solids after Cu(II) adsorption allowed to extract structural information on the Cu-surface site complexes. The Cu2+ ions coordinated with surface polar sites, mainly oxygenated. Adsorption depends on the different Cu(II) salts, caused by the salt solubility and the interacting ability of the counter-ion. In several cases the solutions concentrated in the carbon porosity leading to precipitation of the salt. Ethanol solutions are more adsorbed at the carbon surface than water solutions; Cu(II) partially retains its solvation shell and partially presents electron transfer to the carbon surface. Adsorption is favored to ungraphitized carbons with respect to the graphitized ones due to both the higher surface area, and the higher hydrophilicity of the surface. In summary, these carbon powders, widely used for chromatographic applications, show an adsorption capability towards Cu(II) solutions higher than expected due to both a definite porosity, and the presence of polar groups which are not eliminated with chemical surface treatments.     

Determination of chlorite in drinking water by differential pulse voltammetry on graphite

The chlorite ion is an unavoidable by-product of the disinfection of drinking water by means of chlorine dioxide. The maximum concentration values of chlorite accepted in many countries regulations range from 0.2 to 1.0 mg L^–1. A simple, inexpensive and quickly set up voltammetric procedure for the on-site determination of chlorite in drinking water networks is described. This procedure is suitable for the whole range of applications in drinking water plants. A useful cell for on-field analysis has been developed. Surface morphology and behaviour of carbon-based working electrodes have been investigated by voltammetry and atomic force microscopy (AFM). Actual samples of different types of water networks have been analysed for chlorite concentration.     

A New Preparation of 1,3,3‐Trimethylbicyclo[2.2.2]octan‐2,6‐dione,a Never Isolated Intermediate in a Total Synthesis of (+)‐Norpatchoulenol. Formal Total Synthesis of (±)‐Iso‐Norpatchoulenol

A new preparation and the isolation and spectroscopic characterization of 1,3,3‐trimethylbicyclo[2.2.2]octan‐2,6‐dione ( 3 ), a so far elusive key intermediate in the Liu–Ralitsch total synthesis of (+)‐norpatchoulenol ((+)‐ 1a ), is described. The preparation of 3 constitutes also a formal total synthesis of (±)‐iso‐norpatchoulenol ((±)‐ 1b ), since 3 is correlated to an intermediate in the Monti and co‐workers synthesis of (±)‐ 1b .     

The dimeric and tetrameric octarepeat fragments of prion protein behave differently to its monomeric unit

Potentiometric and spectroscopic data have shown that octarepeat dimer and tetramer are much more effective ligands for Cu(II) ions than simple octapeptide. Thus, the whole N-terminal segment of prion protein due to cooperative effects, could be more effective in binding of Cu(II) than simple peptides containing a His residue. The gain of the Cu(II) binding by longer octarepeat peptides derives from the involvement of up to four imidazoles in the coordination of the first Cu(II) ion. This type of binding increases the order of the peptide structure, which allows successive metal ions for easier coordination.     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.