智能相机管理系统的设计与实现

针对传统的文本编程效率低下、智能相机只允许本地监视以及监视界面固定等问题,自主研发了一套集图形化编程、任务运行、数据监控等功能于一体的智能相机管理系统;分析了智能相机管理系统在编程、运行与监视过程中的功能需求,并进行系统结构的划分和设计;构建图形化图像处理单元、可视化编程界面以实现图形化编程功能;采用网络通讯方式,实现智能相机配置过程的同步、远程监控以及与其他设备的数据交互;讨论了系统中的数据管理模型;最后,通过应用实例验证该系统在工业生产中的可行性。验证结果表明,该系统能缩短开发时间,降低用户开发成本,并能对生产线上的智能相机进行有效的管理。     

在大学物理实验课程中创新人才培养的研究与实践

为培养创新人才,推进大学物理实验课程的教学改革,探索出一条以多层次实验教学体系为主体、以创新研究型教学模式为手段、以科技竞赛创新基地建设为外延的培养创新人才的新途径,使大学物理实验在培养学生创新能力和综合实践能力方面发挥应有的作用。     

A 7-W diode-pumped Nd:YVO4 cw laser at 1.34 μm

A Nd:YVO₄ laser, end-pumped by a fiber-coupled diode-laser array, generates 7.3 W of output power at 1342 nm, the highest so far reported for this host crystal. The slope efficiency is 40% and the output-beam divergence is close to the diffraction limit. An important point in attaining such results is the choice of crystals with low Nd concentration. Received: 16 July 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. Fax: +39-050/844333, E-mail: dilieto@df.unipi.it RID="**" ID="**"Permanent address: Scuola Normale Superiore, Piazza dei Cavalieri 7, Pisa, Italy     

Efficient second, third, fourth, and fifth harmonic generation of a Yb-doped fiber amplifier

We report generation of the second, third, fourth, and fifth harmonics of the output of a Yb-doped fiber amplifier seeded by a passively Q-switched Nd:YAG microchip laser. We obtained high conversion efficiencies using a simple optical arrangement and critically phase-matched nonlinear crystals. Starting with 320 mW of average power at 1064 nm (86 μJ per pulse at a 3.7 kHz repetition rate), we generated 160 mW at 532 nm, 38 mW at 355 nm, 69 mW at 266 nm, and 18 mW at 213 nm. The experimental results are in excellent agreement with calculations.     

Giant shot-like voltage noise in high current density Nb–AlOx–Nb superconducting tunnel junctions

The flat voltage noise component of current biased, high-transparency Nb/AlO_x/Nb superconducting tunnel junctions has been investigated at frequencies up to 70 kHz. Several aspects of the analyzed phenomena suggest the presence of current noise effects induced by the discreteness of the charge carriers. At subgap voltages, where excess currents occur, a behavior coherent with a multiple Andreev reflection-assisted transport through the tunnel barrier has been found. However, the measured charge values exceed any theoretical prediction.     

Structural phase transition due to La substitution in Bi4Ti3O12

The structure of Bi_4?x La _x Ti₃O₁₂ (BLaTx) as a function of La content from x = 0.00 to 1.25 was studied by Raman spectroscopy and X-ray diffraction (XRD). It was observed that the Raman modes evolve discontinuously at about x = 1.00, which indicates a structural phase transition. Specifically, the B _2g and B _3g Raman modes shown evidences to coalesce into E _g modes with increasing La content. The evolution of Raman modes corresponds to the weakening of ferroelectric orthorhombic lattice distortion with increasing La substitution when x ≤ 1.00 and the final transition into the paraelectric tetragonal structure at higher La content. XRD and electrical measurement results confirm this phase transition by the observation that diffraction peaks from (200) and (020) planes of BLaT0.75 coalesce into one peak in BLaT1.25 and by the corresponding disappearance of remanent polarisation. The impact of La substitution on electrical properties of BLaTx is discussed briefly.     

Evidence for a kaon-bound state K(-)pp produced in K(-) absorption reactions at rest

We have searched for a deeply bound kaonic state by using the FINUDA spectrometer installed at the e(+)e(-) collider DAPhiNE. Almost monochromatic K(-)'s produced through the decay of phi(1020) mesons are used to observe K(-) absorption reactions stopped on very thin nuclear targets. Taking this unique advantage, we have succeeded to detect a kaon-bound state K(-)pp through its two-body decay into a Lambda hyperon and a proton. The binding energy and the decay width are determined from the invariant-mass distribution as 115(+6)(-5)(stat)(+3)(-4)(syst) MeV and 67(+14)(-11)(stat)(+2)(-3)(syst) MeV, respectively.     

First-principles theory of correlated transport through nanojunctions

We report the inclusion of electron-electron correlation in the calculation of transport properties within an ab initio scheme. A key step is the reformulation of Landauer's approach in terms of an effective transmittance for the interacting electron system. We apply this framework to analyze the effect of short-range interactions on Pt atomic wires and discuss the coherent and incoherent correction to the mean-field approach.     

AC conductivity of porous silicon: A fractal and surface transport mechanism?

Summary In this paper we report on the frequency dependence of the AC conductivity of porous silicon in the range 10 Hz-100 kHz. Two types of testing devices have been fabricated on three different series of samples formed electrochemically using as a starting materialptype,n ⁻-type andn ⁺-type silicon substrates. For frequencies less than 20-40 kHz the conductivity is found to follow a sublinear frequency dependence. This behaviour is typical of a carrier transport mechanism determined by an anomalous diffusion process. At higher frequencies we find that surface states influence the transport mechanism. This suggests a double-channel transport mechanism: one related to porous-silicon “volume” properties and the other more connected to the “surface” itself. Paper presented at the III INSEL (Incontro Nazionale sul Silicio Emettiore di Luce) Torino, 12–13 October 1995.     

Development and characterisation of an XeCl excimer laser-generated soft-X-ray plasma source and its applications

Summary A large-aperture, long-pulse XeCl excimer laser has been used to generate a soft-X-ray plasma source. Several laser optical configurations have been employed to optimise X-ray emission, including positive-branch unstable resonators and injection by seeding the gain region of the laser with a small commercial excimer laser, resulting in power densities in the range 10¹²–10¹⁴ W cm⁻². The characteristics of the plasma source for each different laser configuration and for different target materials are investigated. The most suitable source conditions (spectral energy distribution, time duration, etc.) for specific applications are discussed. Supported by the Royal Society, UK. Supported by INFM, Italy.