Diferratricarbaboranes of the subcloso-[(eta5-C5H5)2Fe2C3B8H11] type, the first representatives of the 13-vertex dimetallatricarbaborane series

Treatment of the [2-Cp-9-tBuNH-closo-2,1,7,9-FeC(3)B(8)H(10)] (1) ferratricarbollide (Cp = eta(5)-C(5)H(5) (-)) with Na(+) C(10)H(8) (-) in 1,2-dimethoxyethane (DME) at room temperature produced an air-sensitive transient anion with a tentatively identified nido-[tBuNH-CpFeC(3)B(8)H(10)](2-) constitution. In-situ reaction of this low-stability ion with [CpFe(CO)(2)I] or [CpFe(CO)(2)](2) generated three violet diferratricarbaboranes identified as paramagnetic subcloso complexes [4,5-Cp(2-)-4,5,1,6,7-Fe(2)C(3)B(8)H(11)] (2; yield 2 %), [4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(11)] (3; yield 2 %), and [7-tBuNH-4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(10)] (4; yield 14 %). These first representatives of the 13-vertex dimetallatricarbaborane family were characterized by EPR and IR spectroscopy, and mass spectrometry, and their structures were determined by X-ray diffraction analysis.     

Reactivity of pyrrole pigments. Part 9 MINDO/3 calculations on dipyrrolic partial models of bile pigments

The applicability of the MINDO/3 method is evaluated for calculations on dipyrrolic partial structures of bile pigments. It is shown that this method cannot be used for an accurate conformational analysis. However, when applying the frontier orbital model for reactivity parameters, a good picture of the HOMO and the LUMO distribution can be obtained in this type of molecules.

---

Reaktivität von Pyrrolpigmenten, 9. Mitt. MINDO/3-Rechnungen von dipyrrolischen Partialmodellen von Gallenpigmenten

Zusammenfassung Es werden die Einsatzmöglichkeiten von MINDO/3 für den Fall dipyrrolischer Partialstrukturen der Gallenpigmente aufgezeigt. Die Methode ist für eine genaue Konformationsanalyse nicht geeignet. Unter Verwendung der Reaktionsparameter des Frontier-Orbital-Modells läßt sich jedoch ein gutes Bild der HOMO- und LUMO-Verteilung für diesen Verbindungstyp gewinnen.

     

New organocatalysts derived from tartaric and glyceric acids for direct aldol reactions

The synthesis of several new pyrrolidine based asymmetric organocatalysts derived from tartaric, glyceric acids and a pyrrolidine moiety is described with a study of their application in the development of an enantioselective aldol protocol. The influence of different proton donor groups, such as a primary hydroxyl or a carboxylic acid group, or their absence, on the efficiency of the organocatalyst was studied. The configuration of the tartrate derived catalysts and the presence of the rigid butane-2,3-diacetal were found to have a strong influence on the stereoselective outcome of the aldol reaction.     

Enhanced chemical reworkability of DGEBA thermosets cured with rare earth triflates using aromatic hyperbranched polyesters (HBP) and multiarm star HBP‐b‐poly(ε‐caprolactone) as modifiers

A hyperbranched aromatic polyester (HBPOH) has been synthesized, and poly(ε‐caprolactone) arms have been grown on some of its end hydroxyl groups (HBPCL). These modifiers have been used in cationic diglycidyl ether of bisphenol A formulations cured with ytterbium triflate as cationic initiator. The effect of HBPOH and HBPCL on the curing kinetics has been studied using differential scanning calorimetry (DSC). The obtained materials have been characterized by dynamomechanical analysis, DSC, thermogravimetric analysis and mechanical tests. The modifiers are incorporated into the thermosetting network because of the participation of the end hydroxyl groups in the cationic curing of epoxides by the activated monomer mechanism. Homogeneous thermosets have been obtained with a remarkable increase in impact strength without sacrificing elastic modulus or hardness. A compromise between the rigid structure of the aromatic hyperbranched core and the flexibilizing effect of the poly(ε‐caprolactone) arms is believed to be responsible for the overall thermal and mechanical properties of the materials. The use of these polymeric modifiers increases the thermal stability of the resulting materials because of the low degradability of the aromatic ester groups in the hyperbranched core and the incorporation of the modifier into the network structure. However, the presence of such ester groups makes them reworkable by hydrolysis or alcoholysis in an alkaline medium, thus opening a way for recovery of valuable substrates. Copyright © 2013 John Wiley & Sons, Ltd.     

An automated headspace solid-phase microextraction followed by gas chromatography–mass spectrometry method to determine macrocyclic musk fragrances in wastewater samples

A fully automated method has been developed for determining eight macrocyclic musk fragrances in wastewater samples. The method is based on headspace solid-phase microextraction (HS-SPME) followed by gas chromatography–mass spectrometry (GC-MS). Five different fibres (PDMS 7 μm, PDMS 30 μm, PDMS 100 μm, PDMS/DVB 65 μm and PA 85 μm) were tested. The best conditions were achieved when a PDMS/DVB 65 μm fibre was exposed for 45 min in the headspace of 10 mL water samples at 100 °C. Method detection limits were found in the low ng L^?1 range between 0.75 and 5 ng L^?1 depending on the target analytes. Moreover, under optimized conditions, the method gave good levels of intra-day and inter-day repeatabilities in wastewater samples with relative standard deviations (n?=?5, 1,000 ng L^?1) less than 9 and 14 %, respectively. The applicability of the method was tested with influent and effluent urban wastewater samples from different wastewater treatment plants (WWTPs). The analysis of influent urban wastewater revealed the presence of most of the target macrocyclic musks with, most notably, the maximum concentration of ambrettolide being obtained in WWTP A (4.36 μg L^?1) and WWTP B (12.29 μg L^?1), respectively. The analysis of effluent urban wastewater showed a decrease in target analyte concentrations, with exaltone and ambrettolide being the most abundant compounds with concentrations varying between below method quantification limit (<MQL) and 2.46 μg L^?1.

Trans-stereospecific polymerization of butadiene and random copolymerization with styrene using borohydrido neodymium/magnesium dialkyl catalysts

The combination of a neodymium borohydride, Nd(BH₄)₃(THF)₃ (1) or Cp^*Nd(BH₄)₂(THF)_x (2), with MgⁿBuEt (BEM), affords an efficient and highly selective (up to 96.7% 1,4-trans) catalyst for butadiene polymerization. In the presence of excesses of Mg co-catalyst, polymer chain transfer takes place between neodymium and magnesium, and significant amounts of 1,2-units are observed. When considered for butadiene-styrene statistical copolymerization, the catalytic system based on 2 showed a good ability to produce poly[(1,4-trans-butadiene)-co-styrene)], with strong impact of the Mg/Nd ratio on the yield and on the copolymer microstructure, including the percentage of inserted styrene (up to 16.9 mol%). Whatever the co-monomers concentration the polybutadiene backbone remained 1,4-trans. The precise microstructure of the polymers and copolymers was thoroughly analyzed by means of high resolution NMR spectroscopy (900 MHz) and MALDI-ToF spectrometry.     

Determination of 61 organic pollutants in drinking water by solid phase extraction followed by liquid and gas chromatography coupled to tandem mass spectrometry: an analytical strategy for a routine laboratory

A method for determination of 61 organic pollutants (polycyclic aromatic hydrocarbons and organochlorine, organophosphorous and organonitrogen pesticides) is proposed. It is based on solid phase extraction (SPE) and subsequent analysis of the extract by liquid and gas chromatography coupled to tandem mass spectrometry. Method validation yielded to the following values: limits of quantification, from 0.005 to 0.020?µg?L^?1; trueness, 95% to 113% and reproducibility (as percent relative standard deviation), 2% to 15%. Additionally, the method performed well in various proficiency tests.