Determination of volatile organic compounds in urban and industrial air from Tarragona by thermal desorption and gas chromatography-mass spectrometry

This study describes the optimisation of an analytical method to determine 54 volatile organic compounds (VOCs) in air samples by active collection on multisorbent tubes, followed by thermal desorption and gas chromatography-mass spectrometry. Two multisorbent beds, Carbograph 1/Carboxen 1000 and Tenax/Carbograph 1TD, were tested. The latter gave better results, mainly in terms of the peaks that appeared in blank chromatograms. Temperatures, times and flow desorption were optimised. Recoveries were higher than 98.9%, except methylene dichloride, for which the recovery was 74.9%. The method's detection limits were between 0.01 and 1.25 μg m⁻³ for a volume sample of 1200 ml, and the repeatability on analysis of 100 ng of VOCs, expressed as relative standard deviation for n = 3, was lower than 4% for all compounds. Urban and industrial air samples from the Tarragona region were analysed. Benzene, toluene, ethylbenzene and xylenes (BTEX) were found to be the most abundant VOCs in urban air. Total VOCs in urban samples ranged between 18 and 307 μg m⁻³. Methylene chloride, 1,4-dichlorobenzene, chloroform and styrene were the most abundant VOCs in industrial samples, and total VOCs ranged between 19 and 85 μg m⁻³.     

Molecular-programmed self-assembly of homo- and heterometallic penta- and hexanuclear coordination compounds: synthesis, crystal structures, and magnetic properties of ladder-type CuII2MIIx (M=Cu, Ni; x=3, 4) oxamato complexes with CuII2 metallacyclophane cores

New homo- and heterometallic, hexa- and pentanuclear complexes of formula {[Cu2(mpba)2(H2O)F][Cu(Me5dien)]4}(PF6)(3).5H2O (1), {[Cu2(Me3mpba)2(H2O)2][Cu(Me5dien)]4}(ClO4)(4).12H2O (2), {[Cu2(ppba)2][Cu(Me5dien)]4}(ClO4)4 (3), and [Ni(cyclam)]{[Cu2(mpba)2][Ni(cyclam)]3}(ClO4)(4).6H2O (4) [mpba=1,3-phenylenebis(oxamate), Me3mpba=2,4,6-trimethyl-1,3-phenylenebis(oxamate), ppba=1,4-phenylenebis(oxamate), Me5dien=N,N,N'N' ',N' '-pentamethyldiethylenetriamine, and cyclam=1,4,8,11-tetraazacyclotetradecane] have been synthesized through the use of the "complex-as-ligand/complex-as-metal" strategy. The structures of 1-3 consist of cationic CuII6 entities with an overall [2x2] ladder-type architecture which is made up of two oxamato-bridged CuII3 linear units connected through two m- or p-phenylenediamidate bridges between the two central copper atoms to give a binuclear metallacyclic core of the cyclophane-type. Complex 4 consists of cationic CuII2NiII3 entities with an incomplete [2x2] ladder-type architecture which is made up of oxamato-bridged CuIINiII and CuIINiII2 linear units connected through two m-phenylenediamidate bridges between the two copper atoms to give a binuclear metallacyclophane core. The magnetic properties of 1-3 and 4 have been interpreted according to their distinct "dimer-of-trimers" and "dimer-plus-trimer" structures, respectively, (H=-J(S1A.S3A+S1A.S4A+S2B.S5B+S2B.S6B)-J'S1A.S2B). Complexes 1-4 exhibit moderate to strong antiferromagnetic coupling through the oxamate bridges (-JCu-Cu=81.3-105.9 cm-1; -JCu-Ni=111.6 cm-1) in the trinuclear and/or binuclear units. Within the binuclear metallacyclophane core, a weak to moderate ferromagnetic coupling (J'Cu-Cu=1.7-9.0 cm-1) operates through the double m-phenylenediamidate bridge, while a strong antiferromagnetic coupling (J'Cu-Cu=-120.6 cm-1) is mediated by the double p-phenylenediamidate bridge.     

Donor/conductor/acceptor triads spatially organized on the micrometer-length scale: an alternative approach to photovoltaic cells

We have used porous anodised Al(2)O(3) membranes as inert matrix for constructing and organizing spatially ternary donor/conductor/acceptor (DCA) systems exhibiting photovoltaic cell activity on the micrometric-length scale. These DCA triads were built stepwise by first growing a conducting polymer inside the membrane pores, thus forming nanorods that completely fill the internal pore space of the membrane. Then, an electron donor and an electron acceptor were adsorbed one on each side of the membrane, so that they were separated by a distance equal to the membrane thickness (ca. 60 microm), but electronically connected through the conductive polymer. When this device was placed between two electrodes and irradiated with visible light, electrons jumped from the donor molecule, crossed the membrane from side to side through the conductive polymer (a journey of about 60 microm!) until they finally reach the acceptor molecule. In so doing, an electric voltage was generated between the two electrodes, capable of maintaining an electric current flow from the membrane to an external circuit. Our DCA device constitutes the proof of a novel concept of photovoltaic cells, since it is based on the spatial organization at the micrometric scale of complementary, but not covalently linked, electron-donor and electron-acceptor organic species. Thus, our cell is based in translating photoinduced electron transfer between donors and acceptors, which is known to occur at the molecular nanometric scale, to the micrometric range in a spatially organised system. In addition our cell does not need the use of liquid electrolytes in order to operate, which is one of the main drawbacks in dye-sensitised solar cells.     

Proteomic profiling of a snake venom using high mass detection MALDI-TOF mass spectrometry

Proteomic profiling involves identification and quantification of protein components in complex biological systems. Most of the mass profiling studies performed with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) have been restricted to peptides and small proteins (<20 kDa) because the sensitivity of the standard ion detectors decreases with increasing ion mass. Here we perform a protein profiling study of the snake venom Sistrurus miliarius barbouri, comparing 2D gel electrophoresis and reversed-phase high-performance liquid chromatography (HPLC) with a high mass cryodetector MALDI-TOF instrument (Macromizer), whose detector displays an uniform sensitivity with mass. Our results show that such MS approach can render superior analysis of protein complexity compared with that obtained with the electrophoretic and chromatographic approaches. The summation of ion impacts allows relative quantification of different proteins, and the number of ion counts correlates with the peak areas in the reversed-phase HPLC. Furthermore, the sensitivity reached with the high mass cryodetection MS technology clearly exceeds the detection limit of standard high-sensitivity staining methods.     

Behaviour of semipermeable membrane devices in neutral pesticide uptake from waters

The application of semipermeable membrane devices (SPMDs) has been evaluated as a passive sampler for the collection of multiresidue pesticides in continental waters. Seven chlorinated, five organophosphorus, six carbamate, nine pyrethroid and ten other pesticides were tested in order to estimate which compounds can be retained with these devices. The effect of water parameters, such as temperature, pH, ionic strength and organic matter content, were evaluated for their effect on the retention of the pesticides by the SPMDs. Studies of uptake from water were performed in a glass beaker containing 2 L distilled water spiked with 50 ng L⁻¹ of each pesticide investigated. A SPMD was put in the beaker, under turbulent conditions, and analysed after 2 days’ extraction. The contents of each SPMD were microwave-assisted-extracted twice with 30 mL hexane–acetone, to 90 °C for 10 min, and this was followed by a cleanup based on acetonitrile partitioning and solid-phase extraction. Gas chromatography with tandem mass spectrometry detection was employed for determination of pesticides, and provided low limits of detection from 0.5 to 7 ng per SPMD. Higher absorption rates were observed for pyrethroid, organophosphorus and chlorinated compounds than for carbamates. Pesticide uptake rates were independent of the water composition and decreased at low temperature. Electronic supplementary material The online version of this article contains supplementary material, which is available to authorized users.     

On the convergence of isolated neutral oxygen vacancy and divacancy properties in metal oxides using supercell models

The properties of isolated neutral oxygen vacancies and divacancies of metal oxides of increasing complexity (MgO, CaO, alpha-Al2O3, and ZnO) have been studied by means of density-functional theory within a supercell periodic approach. Vacancy formation energies, vacancy-vacancy interactions, and geometry rearrangements around these point defects have been investigated in detail. The characterization of the electronic structure of these point defects has been established by analysis of the density of states and of the topology of the electron density and of electron localization function. It is found that the chemical character of the oxide determines the properties of the oxygen vacancies. For the covalent ZnO oxide, a more complex scheme arises in which the relaxation around the oxygen vacancy is much larger leading to the formation of Zn4-like almost metallic particles in the crystal. The relationship of these structures with the crystal shear planes is discussed. The present study shows that supercells containing approximately 200-300 atoms provide converged values for the geometric and electronic structure of oxygen vacancies of these metal oxides in the point defect low concentration limit.     

Validated, non-destructive and environmentally friendly determination of cocaine in euro bank notes

A non-destructive, fast and environmentally friendly procedure has been developed for cocaine determination in euro bank notes. Cocaine was extracted with 15 ml methanol by vortex agitation during 5 min. The extract was evaporated and reconstituted in 0.5 ml methanol. GC-MS-MS analysis was performed using as precursor ion m/z 182.2, with an excitation energy voltage of 1.60 eV, being the product ions measured m/z 150.2 and 82.0. A limit of detection of 0.15 ng per note and a repeatability of 6%, established from the relative standard deviation, of a 1 ng ml(-1) level, were achieved. Recoveries of 101+/-2 and 98+/-3% were obtained for samples spiked with 100 and 10 microg respectively. Results show that all the euro bank notes measured (16 samples) were contaminated with cocaine in the range between 1.25 and 889 microg. Two different contamination levels, high level (150-889 microg) and low one (1.25-77 microg) were found and it could be related with the direct or indirect contact with the drug.     

Chemisorption of atomic hydrogen on rhodium: An ab initio cluster-model approach

Interaction of atomic hydrogen with cluster models simulating the Rh(111) surface has been studied at the ab initio SCF level using relativistic non-empirical pseudopotentials and moderately large basis sets. From the bonding parameters, it is seen that chemisorption on the threefold open position is five times more favoured than on the threefold eclipsed one, and the bonding picture is rather different for both active sites. Since two different kinds of adsorbed hydrogen atoms should exist according to various experimental techniques, the present work adds further evidence to the existence of these two types of adsorption and reports some structural parameters which can help to a more detailed characterization in the near future.     

4,2-Ribbon like ferromagnetic cyano-bridged Fe(III)2Ni(II) chains: a magneto-structural study

The low-spin iron(III) complex AsPh(4)[Fe(III)(bpy)(CN)(4)].CH(3)CN (1) [AsPh(4) = tetraphenylarsonium cation] and the heterobimetallic chains [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)].4H(2)O with L = bpy (2) and phen (3) [bpy = 2,2'-bipyridine and phen = 1,10-phenanthroline] have been prepared and their structures determined by X-ray diffraction methods. The structure of 1 consists of mononuclear [Fe(bpy)(CN)(4)](-) anions, tetraphenylarsonium cations and acetonitrile molecules of crystallization. The iron(III) is hexacoordinated with two nitrogen atoms of the bidentate bpy and four carbon atoms of four terminal cyanide groups building a distorted octahedral surrounding around the metal atom. 2 and 3 are isomorphous compounds whose structure is made up of neutral 4,2-ribbon like bimetallic chains of formula [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)] where the [Fe(III)(L)(CN)(4)](-) unit acts as a bis-monodentate bridging ligand toward the trans-diaquanickel(II) units through two of its four cyanide groups in cis positions. The chains exhibit two orientations in the unit cell and they interact with each other through hydrogen bonds involving the coordination and crystallization water molecules together with the uncoordinated cyanide nitrogen atoms of the [Fe(L)(CN)(4)](-) units. Compounds 2 and 3 behave as ferromagnetic Fe(III)(2)Ni(II) chains which interact ferromagnetically at very low temperatures in the case of 2, whereas metamagnetic-like behaviour is observed for with a critical field (H(c)) around 200 G. For H > H(c) the ferromagnetic Fe(III)(2)Ni(II) chains of 3 exhibit a frequency dependence of the out-of-phase ac susceptibility signal at T < 3.5 K.