Advanced analytical methods for the structure elucidation of polystyrene-b-poly(n-butyl acrylate) block copolymers prepared by reverse iodine transfer polymerisation

Reverse iodine transfer polymerisation (RITP) is a living radical polymerisation technique that has shown to be feasible in synthesising segmented styrene-acrylate copolymers. Polymers synthesised via RITP are typically only described regarding their bulk properties using nuclear magnetic resonance spectroscopy and size exclusion chromatography. To fully understand the complex composition of the polymerisation products and the RITP reaction mechanism, however, it is necessary to use a combination of advanced analytical methods. In the present RITP procedure, polystyrene was synthesised first and then used as a macroinitiator to synthesise polystyrene-block-poly(n-butyl acrylate) (PS-b-PBA) block copolymers. For the first time, these PS-b-PBA block copolymers were analysed by a combination of SEC, in situ¹H NMR and HPLC. ¹H NMR was used to determine the copolymer composition and the end group functionality of the samples, while SEC and HPLC were used to confirm the formation of block copolymers. Detailed information on the living character of the RITP process was obtained.     

A structural investigation of the alkali metal site distribution within bioactive glass using neutron diffraction and multinuclear solid state NMR

The atomic-scale structure of Bioglass and the effect of substituting lithium for sodium within these glasses have been investigated using neutron diffraction and solid state magic angle spinning (MAS) NMR. Applying an effective isomorphic substitution difference function to the neutron diffraction data has enabled the Na-O and Li-O nearest-neighbour correlations to be isolated from the overlapping Ca-O, O-(P)-O and O-(Si)-O correlations. These results reveal that Na and Li behave in a similar manner within the glassy matrix and do not disrupt the short range order of the network former. Residual differences are attributed solely to the variation in ionic radius between the two species. Successful simplification of the 2 < r (?) < 3 region via the difference method has enabled all the nearest neighbour correlations to be deconvolved. The diffraction data provides the first direct experimental evidence of split Na-O nearest-neighbour correlations in these melt quench bioactive glasses, and an analogous splitting of the Li-O correlations. The observed correlations are attributed to the metal ions bonded either to bridging or to non-bridging oxygen atoms. (23)Na triple quantum MAS (3QMAS) NMR data corroborates the split Na-O correlations. The structural sites present will be intimately related to the release properties of the glass system in physiological fluids such as plasma and saliva, and hence to the bioactivity of the material. Detailed structural knowledge is therefore a prerequisite for optimizing material design.     

Dissociation techniques in mass spectrometry-based proteomics

The field of proteomics, the large-scale analysis of proteins, has undergone a huge expansion over the past decade. Mass spectrometry-based proteomics relies on the dissociation of peptide and/or protein ions to provide information on primary sequence and sites of post-translational modifications. Fragmentation techniques include collision-induced dissociation, electron capture dissociation and electron transfer dissociation. Here, we describe each of these techniques and their use in proteomics. The principles, advantages, limitations, and applications are discussed.     

Studies on Immobilization and Partial Characterization of Lipases from Wheat Seeds (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

The objective of this study was to provide some features on immobilization and partial characterization of lipases from wheat seeds. The optimum pH and temperature were found to be 5.5 and 32–37 °C, respectively. The stability of the concentrated enzymatic extract to high temperatures (25, 35, 45, and 55 °C) showed that the incubation of the extract at 55 °C led to its complete inactivation. The concentrated enzymatic extract kept 90% of its hydrolytic and esterification activities until 70 and 40 days of storage at 4 °C, respectively. The extract presented higher hydrolytic specificity to substrates of medium and long chains and higher esterification affinity to fatty acids of short and medium chains and alcohols with two and three carbon atoms. After the immobilization process using activated coal and sodium alginate as supports, an enhancement of about threefold in lipase activity was observed. The development of the present work permitted us to point out some characteristics of lipases from wheat seeds necessary for the proposition of new future industrial applications for this important biocatalyst.     

Synthesis and Characterization of Antimony(III) Complexes of Thioamides,and Crystal Structure of {[Sb(Imt)2Cl2]2((2‐Imt)}Cl2(Imt=Imidazolidine‐2‐thione)

Antimony(III) complexes of thioamides [thioamides=thiourea (Tu), N,N′‐dimethylthiourea (Dmtu), tetramethylthiourea (Tmtu), imidazolidine‐2‐thione (Imt) and diazinane‐2‐thione (Diaz)] with the general formulae, Sb(thione)_nCl₃ (n=1, 2, 2.5, 3) were prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C) spectroscopic methods. The spectral data of the complexes are consistent with the coordination of the thiones to antimony(III). The crystal structure of one of them, {[Sb(Imt)₂Cl₂]₂(μ₂‐Imt)}Cl₂ ( 1 ), was determined by X‐ray crystallography, which shows that the complex is dinuclear consisting of two [Sb(Imt)₂Cl₂] units bridged by an Imt molecule. In 1 , the antimony atom is bonded to two chlorine atoms, two sulfur atoms of coordinated Imt molecules and one sulfur atom of a bridging Imt molecule. The antimony environment can be considered to be distorted octahedral with one Cl^? ion weakly bound to antimony.     

Simultaneous determination of inulin and p-aminohippuric acid (PAH) in human plasma and urine by high-performance liquid chromatography

Inulin and p-aminohippuric acid (PAH) clearances are used for the estimation of glomerular filtration rate (GFR) and effective renal plasma flow (ERPF). A simple and rapid high-performance liquid chromatography (HPLC) method with UV detection is described for the simultaneous determination of inulin and PAH in the same chromatogram in the plasma and urine of humans. Plasma and urine samples were hydrolyzed with perchloric acid (0.7%) in boiling water. The mobile phase consisted of 0.01 M potassium dihydrogenphosphate with 0.02 M tetramethylammonium chloride and o-phosphoric acid (pH 3)-acetonitrile (94:6, v/v), pumped at a rate of 1.2 ml min-1 on a C8 reversed-phase column. Tannic acid was used as the internal standard and UV detection at 285 nm was employed. The calibration curves were linear over the concentration range of 12.5-100 mg l-1 for inulin and 6.25-50 mg l-1 for PAH with determination coefficients greater than 0.997. The method is accurate (bias < 13%) and reproducible (intra- and inter-day relative standard deviation less than 11%), with a limit of quantitation of 12.5 mg l-1 and 6.25 mg l-1 for inulin and PAH, respectively. Analytical recoveries from urine and plasma were ranged from 81 to 108% for both compounds. This fully validated method, which allows the simultaneous determination of inulin and PAH clearances, is simple, rapid (total run time < 10 min) and requires only a 200 microliters plasma or urine sample.     

The solubility of oxygen in aqueous fluorocarbon emulsions

The solubility of oxygen in aqueous fluorocarbon emulsions has been measured directly for several perfluorocarbons and monobromo or monoiodo-perfluorocarbons. The measured oxygen solubilities are consistent with results for the solubility of oxygen in neat liquid perfluorinated organic compounds.     

Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies

Adsorption of methylene blue (MB) on agar was investigated as a function of temperature (308-328 K), different concentrations of NaCl and HCl and various weight percentages of binary mixtures of ethanol with water. It was observed that the maximum experimental adsorption capacity, q _{m, exp}, in water is up to 50 mg g^-1 and decreases with increase in weight percentage of ethanol and NaCl and HCl concentration compared to that of water. Analysis of data using ARIAN model showed that MB adsorbs as monomer and dimer on the surface of agar. Binding constants of MB to agar were calculated using the Temkin isotherm. The process is exothermic in water and other solutions. The mean adsorption energy (E) value indicated binding of MB to agar is chemical adsorption. Kinetics of this interaction obeys from the pseudo-second-order model and diffusion of the MB molecules into the agar is the main rate-controlling step.     

The hydrological response of heavy clay grassland soils to rainfall in south‐west England using δ2H

Stable isotopes of water have been previously used in catchment studies to separate rain‐event water from pre‐event groundwater. However, there are a lack of studies at the smaller scale looking at the separation of event water from pre‐event water. This is particularly relevant for heavy clay soil systems through which the movement of water is uncertain but is thought to be rainwater‐dominated. The data presented here were collected at a rural site in the south‐west of England. The historic rainfall at the site was isotopically varied but similar to the global meteoric water line, with annual weighted means of ?37‰ for δ²H and ?5.7‰ for δ¹⁸O and with no seasonal variation. Drainage was sampled from the inter‐flow (surface runoff + lateral through‐flow) and drain‐flow (55 cm deep mole drains) pathways of two 1 ha lysimeters during two rainfall events, which had δ²H values of ?68‰ and ?92‰, respectively. The δ²H values of the lysimeter drainage water suggest that there was no contribution of event water during the first, small discharge (Q) event; however, the second larger event did show isotopic variation in δ²H values negatively related to Q indicating that rainwater was contributing to Q. A hydrograph separation indicated that only 49–58% of the inter‐flow and 18–25% of the drain‐flow consisted of event water. This was surprising given that these soil types are considered retentive of soil water. More work is needed on heavy clay soils to understand better the nature of water movement from these systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Wittig and horner-wittig coupling reactions of 2-substituted cyclic ethers and their application to spiroketal synthesis

Wittig and Horner-Wittig coupling reactions of tetrahydropyran or tetrahydrofuran 2-triphenylphosphonium salts or 2-diphenylphosphine oxides with aldehydes and lactols affords good yields of the corresponding enol ethers. In selected examples these enol ether products may be further converted to spiroketals some of which are natural pheromones derived from $\text{Dacus oleae}$ and $\text{Paravespula vulgaris}$.