Synthesis and Cytotoxicity Evaluation of Metal‐Chelator‐Bearing Flavone,Carbazole, Dibenzofuran,Xanthone, and Anthraquinone

2‐(Aryloxymethyl)‐5‐benzyloxy‐1‐methyl‐1H‐pyridin‐4‐ones 8a – 8g , 2‐(aryloxymethyl)‐5‐hydroxy‐4H‐pyran‐4‐ones 9a – 9g , and 2‐(aryloxymethyl)‐5‐hydroxy‐1‐methyl‐1H‐pyridin‐4‐ones 10a – 10g were prepared from the known 5‐benzyloxy‐2‐(hydroxymethyl)pyran‐4‐one ( 3 ) in a good overall yield. These compounds were evaluated in vitro against a three‐cell lines panel consisting of MCF7 (breast), NCI‐H460 (lung), and SF‐268 (CNS), and the active compounds passed on for evaluation in the full panel of 60 human tumor cell lines derived from nine cancer cell types. The results indicated that 5‐hydroxy derivatives are more favorable than their corresponding 5‐benzyloxy precursors ( 10a – 10g vs. 8a – 8g ), and 1‐methyl‐1H‐pyridin‐4‐ones are more favorable than their corresponding pyran‐4(1H)‐ones ( 10a – 10g vs. 9a – 9g ). Among these three types of compounds, 2‐(aryloxymethyl)‐5‐hydroxy‐1‐methyl‐1H‐pyridin‐4‐ones 10a – 10g were the most cytotoxic; they inhibited the growth of almost all the cancer cells tested. On the contrary, compound 8a (a mean GI₅₀=27.8 μM ), 8b (38.5), 8d (11.0), and 8e (30.5) are especially active against the growth of SK‐MEL‐5 (a melanoma cancer cell) with a GI₅₀ of <0.01, 5.65, 0.55, and 0.03 μM , respectively (cf. Table 2).     

Kinetics of reaction of alkynes with some cobalt carbonyls

Pt(CO)₂Cl₂ reacts in benzene, toluene or tetrahydrofuran with 3-hexyne to give carbonylplatinumbis[di-μ-chloro,chloro(tetraethylcyclobutadiene)platinum](I), bis[dichloro(tetraethylcyclopentadienone)platinum] (III), dichloro-(tetraethyl-p-benzoquinone)platinum (IV) and dichloro(tetraethylcyclobutadiene)platinum (II). This last compound is also obtained by treating I with 1 to 3 moles of triphenylphosphine or p-toluidine. p ]The structure and reactions of III are discussed; the anion exchange reaction gives the iodo-analogue, while treatment with donor ligands gives adducts of formula [(C₂H₅)₄C₄CO]PtCl₂L(L = triphenylphosphine, p-toluidine, benzylamine and pyridine) and [(C₂H₅)₄C₄CO]PtCl₂L₂(L = benzylamine, 3-methylpyridine). p ]2-Butyne reacts with dichlorodicarbonylplatinum to give the methyl analogous of compounds I–III.     

Ab initio crystal orbital studies on linear chains of H atoms

Anab initio crystal orbital method is used to calculate the energies of an infinite chain of H atoms and of linear arrangements of H₂ molecules with different interatomic distances. The H₂ arrangements are not stable in respect to isolated molecules. The cohesive energy of an optimized arrangement of H atoms chain is 0.0354 a.u.     

2-[3-(Trifluoromethyl)phenyl]furo[3,2-b]pyrroles: synthesis and reactions

The synthesis and reactions of methyl 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole-5-carboxylate (1a) are described. Upon reaction with methyl iodide, benzyl chloride, or acetic anhydride, this compound gave N-substituted products 1b-d. By hydrolysis of compounds 1a-c, the corresponding acids 2a-c were formed, or by reaction with hydrazine-hydrate, the corresponding carbohydrazides 3a-c were formed. By heating 2-[3-(trifluoromethyl)phenly]-4H-furo[3,2-b]pyrrole-5-carboxylic acid (2a) in acetic anhydride, 4-acetyl-2-[3-(trifluoromethyl)phenyl]furo[3,2-b]pyrrole (4) was formed. By hydrolysis of 4, 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole (5a) was formed, and reactions with methyl iodide or benzyl chloride gave N-substituted products 5b-c. The reaction of 4 with dimethyl butynedioate gave substituted benzo[b]furan 6. Compound 3a reacted with triethyl orthoesters giving 7a-c, which afforded with phosphorus (V) sulphide the corresponding thiones 8a-c. The thiones 8a-c reacted with hydrazine hydrate to form hydrazine derivatives 9a-c. The reaction of triethyl orthoformiate with compounds 9a-c led to furo[2′,3′: 4,5]pyrrolo[1,2-d][1,2,4]triazolo[3,4-f][1,2,4]triazines 10a-c. Hydrazones 11a-c were formed from 3a-c and 5-[3-(trifluoromethyl)phenyl]furan-2-carboxaldehyde. The effect of microwave irradiation on some condensation reactions was compared with “classical” conditions. The results showed that microwave irradiation shortens the reaction time while affording comparable yields.     

Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion

Summary.  Ultra-fine grained (UFG) Cu (grain size 80 nm) containing 0.5 wt.% Al₂O₃ nanoparticles (size 20 nm) was prepared by high pressure torsion (HPT). Positron lifetime spectroscopy was employed to characterize the microstructure of this material, especially with respect to types and concentration of lattice defects. The evolution of microstructure with increasing temperature was studied by positron lifetime spectroscopy and X-ray diffraction measurements. The thermal stability of the Cu + 0.5 wt.% Al₂O₃ nanocomposite was compared with that of pure UFG Cu prepared by the same technique. The processes taking place during thermal recovery of the initial nanoscale structure in both studied materials are described. Received October 5, 2001. Accepted (revised) December 20, 2001     

指数升温脱附研究

本文采用分子筛吸附苯或正已烷, 进行指数程序升温脱附。结果表明, 活化能与脱附最大速率所对应的温度(T_m)有线性关系, 即E_d=KT_m。对指数升温条件下得到的脱附图谱与各个脱附动力学参量之间的关系进行了数学分析, 并将分析结果与线性升温所得的结果相比较。各对应的动力学参数的数值基本相同。我们推导得到的指数升温基本方程与目前通用的线性升温基本方程~[2]相比较, 如果温度的测量精度相同则指数升温计算方法的精度比线性升温高(2T+△T)倍。实验还说明, 指数升温的曲线比线性升温容易控制。     

Kinetic and catalytic aspects of dimethylterephtalate transesterification also through the use of model molecules

Kinetic and catalytic aspects of DMT transesterification reaction, key step in the industrial production of polyethylenterephtalate (PET), have been deepened also through the use of model molecules such as CH₃COO–Ph–X. These molecules give the same reactions with ethylene glycol occurring in the DMT transesterification too. The use of model molecules in the study of this reaction seems therefore to be promising in perspective. As we observed, however, the nature of the para-substituent X has a very strong influence on the reaction rate, when salts of bivalent metals such as Zn, Cd, Co, Mg, Mn, are used as catalysts, while this influence is much smaller when a tetravalent metal, as Ti, is used. This fact suggests that the transesterification mechanism operating in the two cases is different and this suggestion has been confirmed by applying Hammett's approach to the available kinetic data. Experimental kinetic runs were all performed at 193°C, by withdrawing small samples of the reaction mixture at different reaction times. These samples were gaschromatographically analyzed. We found volcano shaped curves of the reaction rates as a function of the metal ion acidities and we obtained different trends with a maximum of activity shifted from a metal to another for different substrates. A comparison of the kinetic results obtained, respectively, with the model molecules and DMT will be reported too.     

Redox site confinement in highly unsymmetric dimanganese complexes

A set of highly preorganized pyrazolate-bridged dimanganese complexes L(Mn)MnX have been prepared and structurally characterized. They can be described as hybrid organometallic/Werner-type systems that consist of a low-spin CpMn(I)(CO)2 subunit (Mn1) and a proximate tripodal tetradentate {N4} binding pocket accommodating a high-spin Mn(II) ion (Mn2), with Mn...Mn distances of approximately 4.3 A and different coligands bound to Mn2. Density functional theory (DFT) calculations (both the hybrid B3LYP and the pure BP86 functionals and the all-electron basis sets 6-311G and 6-311G*) confirm that the valence alpha and beta Kohn-Sham molecular orbitals (MOs) of these mixed-valent Mn(I)Mn(II) compounds have predominant Mn(3d) character and an almost perfectly localized nature: all five unpaired electrons are essentially localized at the Werner-type Mn2, whereas Mn1 possesses an effective closed-shell structure with the MOs of highest energy centered there. One-electron oxidation occurs in a clean process at approximately E(1/2) = -0.6 V (versus ferrocene/ferrocinium), giving the low-spin/high-spin Mn(II)Mn(II) species. UV/vis and IR spectroelectrochemistry as well as a detailed theoretical analysis reveal that the redox process takes place with strict site control at the organometallic subunit, while it does not significantly influence the spin and charge distribution on the Werner-type site. Positions and shifts of the nu(C[triple bond]O) absorptions are largely reproduced by the DFT calculations. These systems thus represent an exceptional example of the effect the unsymmetry of a dinucleating ligand scaffold has on the spin and charge distribution in homobimetallic complexes and might offer interesting prospects for the study of the cooperative effects of bimetallic arrays.     

Investigation of Cd(II), Pb(II) and Cu(I) complexation by glutathione and its component amino acids by ESI-MS and size exclusion chromatography coupled to ICP-MS and ESI-MS

The elucidation of structures of glutathione (GSH) complexes play an important role in the fundamental understanding of biochemical pathways of metal ion deactivation in plants. This article attempts to feature key studies for stoichiometry of metal complexes with glutathione and its constituent amino acids to obtain a better understanding of the different metal affinities of the complexation sites of glutathione. The SEC-ICP-MS experiments have indicated that oxidation process of glutathione was accelerated by metal ion presence in following order Cu⁺, Pb²⁺ and Cd²⁺. The redox activity of metal ions was confirmed by ESI-MS experiments, which allowed to observe formation of glutathione disulphide (GSSG) in time. The stoichiometry of Cd²⁺, Cu⁺ and Pb²⁺ complexes with GSH was defined by observing the isotope pattern of investigated metals and hydrogen loss or transfer during binding. The complexes with metal bound to sulphur of 1:1 and 1:2 stoichiometry were found in case of cadmium and lead. The number of hydrogen atoms lost during metal binding and the SEC-ESI-MS results allowed to elucidate that copper is bound by GSSG in ratio 1:1 and 1:2. Additionally, size exclusion chromatography coupled to electrospray MS allowed to differentiate more stable complexes from weak ones that could be created in the gas phase.     

Synthesis, linear, and quadratic-nonlinear optical properties of octupolar D3 and D2d bipyridyl metal complexes

A series of D3 (Fe(II), Ru(II), Zn(II), Hg(II)) and D2d (Cu(I), Ag(I), Zn(II)) octupolar metal complexes featuring different functionalized bipyridyl ligands has been synthesized, and their thermal, linear (absorption and emission), and nonlinear optical (NLO) properties were determined. Their quadratic NLO susceptibilities were determined by harmonic light scattering at 1.91 microm, and the molecular hyperpolarizability (beta0) values are in the range of 200-657 x 10(-30) esu for octahedral complexes and 70-157 x 10(-30) esu for tetrahedral complexes. The octahedral zinc(II) complex 1 e, which contains a 4,4'-oligophenylenevinylene-functionalized 2,2'-bipyridine, exhibits the highest quadratic hyperpolarizability ever reported for an octupolar derivative (lambdamax=482 nm, beta1.91(1 e)=870 x 10(-30) esu, beta0(1 e)=657 x 10(-30) esu). Herein, we demonstrate that the optical and nonlinear optical (NLO) properties are strongly influenced by the symmetry of the complexes, the nature of the ligands (donor endgroups and pi linkers), and the nature of the metallic centers. For example, the length of the pi-conjugated backbone, the Lewis acidity of the metal ion, and the increase of ligand-to-metal ratio result in a substantial enhancement of beta. The contribution of the metal-to-ligand (MLCT) transition to the molecular hyperpolarizability is also discussed with respect to octahedral d6 complexes (M=Fe, Ru).