Mild Synthesis of Amino‐Poly(ethylene glycol)s. Application to Steric Stabilization of Clays

The hydroxyl end groups of poly(ethylene glycol) (PEG) have been transformed easily and quantitatively into amino groups via the Mitsunobu reaction. Phthalimide was alkylated with PEGs and the hydrazinolysis of the resulting phthalimido‐PEGs gave the amino compounds in high yields. Quaternization of the amino groups leads to hydrophilic polymer chains bearing a positive charge on one or two ends, depending on the chosen PEG. Such products can be used to protect sterically, negatively charged particles such as clays.

     

Preparation of quinoxalines, dihydropyrazines, pyrazines and piperazines using tandem oxidation processes

Alpha-hydroxyketones undergo MnO2-mediated oxidation followed by in situ trapping with aromatic or aliphatic 1,2-diamines to give quinoxalines or dihydropyrazines, respectively, in a one pot procedure which avoids the need to isolate the highly reactive 1,2-dicarbonyl intermediates. Modifications of the procedure allow the formation of pyrazines and piperazines.     

Synthesis and deprotonation of 2-(pyridyl)phenols and 2-(pyridyl)anilines

2-(2- and 3-Pyridyl)anilines (1, 2), 2,2-dimethyl-N-[2-(2- and 3-pyridyl)phenyl]propanamides (3, 4), and 2-, 3- and 4-(2-methoxyphenyl)pyridines (7-9) are readily synthesized using cross-coupling reactions. Whereas the amines 1, 2 undergo side reactions, the corresponding amides 3, 4 are deprotonated with lithium 2,2,6,6-tetramethylpiperidide (LTMP): the compound 3 at C6' under in situ quenching, and the compound 4 at C4'. When the ether 7 is subjected to the same reagent, lithiation occurs at C6'.     

Binding sites of nitrogenase: kinetic and theoretical studies of cyanide binding to extracted FeMo-cofactor derivatives

The first kinetic study of a substrate (CN(-)) binding to the isolated active site (extracted FeMo-cofactor) of nitrogenase is described. The kinetics of the reactions between CN(-) and various derivatives of extracted FeMo-cofactor [FeMoco-L; where L is bound to Mo, and is NMF, Bu(t)NC, or imidazole (ImH)] have been followed using a stopped-flow, sequential-mix method in which the course of the reaction is followed indirectly, by monitoring the change in the rate of the reaction of the cofactor with PhS(-). The kinetic results, together with DFT calculations, indicate that the initial site of CN(-) binding to FeMoco-L is controlled by a combination of the electron-richness of the cluster core and lability of the Mo-L bond. Ultimately, the reactions between FeMoco-L and CN(-) involve displacement of L and binding of CN(-) to Mo. These reactions occur with a variety of rates and rate laws dependent on the nature of L. For FeMoco-NMF, the reaction with CN(-) is complete within the dead-time of the apparatus (ca. 4 ms), while with FeMoco-CNBu(t) the reaction is much slower and exhibits first order dependences on the concentrations of both FeMoco-CNBu(t) and CN(-) (k = 2.5 +/- 0.5 x 10(4) dm(3) mol(-1) s(-1)). The reaction of FeMoco-ImH with CN(-) occurs at a rate which exhibits a first order dependence on FeMoco-ImH but is independent of the concentration of CN(-) (k = 50 +/- 10 s(-1)). The results are interpreted in terms of CN(-) binding directly to the Mo site for FeMoco-NMF and FeMoco-ImH, but with FeMoco-CNBu(t) initial binding at an Fe site is followed by movement of CN(-) to Mo. Complementary DFT calculations are consistent with this interpretation, indicating that, in FeMoco-L, the Mo-L bond is stronger for L = ImH than for L = CNBu(t) and the binding of CN(-) to Mo is stronger than to any Fe atom in the cofactor.     

Syntheses and reactivity of the diselenido molybdenum-manganese complex CpMoMn(CO)5(mu-Se2)

Reaction of CpMoMn(CO)(8) with elemental selenium and Me(3)NO in the absence of light yielded the diselenido complex CpMoMn(CO)(5)(mu-Se(2)), 2. Compound 2 contains a bridging diselenido ligand lying perpendicular to the Mo-Mn bond, Mo-Mn = 2.8421(10) A. In the presence of room light, the reaction yielded the tetranuclear metal complex Cp(2)Mo(2)Mn(2)(CO)(7)(mu(3)-Se)(4), 3 (36% yield), and 2 (7% yield). Compound 2 reacted with ethylene to yield the ethanediselenato complex CpMoMn(CO)(5)(mu-SeCH(2)CH(2)Se), 4, by insertion of ethylene into the Se-Se bond. Compound 2 also reacted with (PPh(3))(2)Pt(PhC(2)Ph) and CpCo(CO)(2) to yield the complexes CpMoMnPt(PPh(3))(2)(CO)(5)(mu(3)-Se)(2), 5, and Cp(2)CoMoMn(CO)(5)(mu(3)-Se)(2), 6, respectively, by insertion of the metal groupings CpCo and Pt(PPh(3))(2) into the Se-Se bond of 2. The oxo compound Cp(2)CoMo(O)Mn(CO)(5)(mu(3)-Se)(2), 7, was obtained from 6 by decarbonylation at molybdenum by using Me(3)NO. The molecular structures of the complexes 2-7 were established by single-crystal X-ray diffraction analyses.     

Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Reactions of the ionized enol tautomer of acetanilide: elimination of HNCO via a novel rearrangement

The reactions of ionised acetanilide, C(6)H(5)NH(=O)CH(3)(.+), and its enol, C(6)H(5)NH(OH)=CH(2)(.+), have been studied by a combination of tandem mass spectrometric and computational methods. These two isomeric radical cations have distinct chemistries at low internal energies. The keto tautomer eliminates exclusively CH(2)=C=O to give ionised aniline. In contrast, the enol tautomer loses H-N=C=O, via an unusual skeletal rearrangement, to form predominantly ionised methylene cyclohexadiene. Hydrogen atom loss also occurs from the enol tautomer, with the formation of protonated oxindole. The mechanisms for H-N=C=O and hydrogen atom loss both involve cyclisation; the former proceeds via a spiro transition state formed by attachment of the methylene group to the ipso position, whereas the latter entails the formation of a five-membered ring by attachment to the ortho position. The behaviour of labelled analogues reveals that these two processes have different site selectivities. Hydrogen atom loss involves a reverse critical energy and is subject to an isotope effect. Surprisingly, attempts to promote the enolisation of ionised acetanilide by proton-transport catalysis were unsuccessful. In a reversal of the usual situation for ionised carbonyl compounds, ionised acetanilide is actually more stable than its enol tautomer. The enol tautomer was resistant to proton-transport catalysed ketonisation to ionised acetanilide, possibly because the favoured geometry of the encounter complex with the base molecule is inappropriate for facilitating tautomerisation.     

Transformations of cyclic nonaketides by Aspergillus terreus mutants blocked for lovastatin biosynthesis at the lovA and lovC genes

Two mutants of Aspergillus terreus with either the lovC or lovA genes disrupted were examined for their ability to transform nonaketides into lovastatin 1, a cholesterol-lowering drug. The lovC disruptant was able to efficiently convert dihydromonacolin L 5 or monacolin J 9 into 1, and could also transform desmethylmonacolin J 15 into compactin 3. In contrast, the lovA mutant has an unexpectedly active beta-oxidation system and gives only small amounts of 1 upon addition of the immediate precursor 9, with most of the added nonaketide being degraded to heptaketide 22. Similarly, the lovA mutant does not accumulate the polyketide synthase product 5 and rapidly degrades any 5 added as a precursor via two cycles of beta-oxidation and hydroxylation at C-6 to give 20. The possible involvement of epoxides 21a and 21b in the biosynthesis of 1 was also examined, but their instability in fermentation media and fungal cells will require purified enzymes to establish their role.     

A donor-acceptor substituted molecular motor: unidirectional rotation driven by visible light

A newly designed donor-acceptor substituted molecular motor 1 allows unidirectional rotation driven by visible light and shows some unique photophysical properties.     

Diastereoselective preparation of 2,4,6-trisubstituted-2'-cyanopiperidines: application to the construction of the carbon framework of perhydrohistrionicotoxin

The anodic cyanation of methanolic solutions of the 2-alkyl-N-phenylpiperidines 6b-d was performed in a flow cell equipped with a graphite felt anode. The reaction led to the formation of the 2-cyano-6-alkyl-N-phenylpiperidines 2b-d and proceeded with a high degree of regioselectivity. The 1H NMR spectra of the aminonitriles 2b-d showed an epimeric mixture at C-6. The major isomer has a trans configuration in which the cyano group is axial and the alkyl substituent is equatorial. Conversely, electrochemical oxidation of the 4-methyl-6-pentyl-N-phenylpiperidine 6e afforded the trisubstituted aminonitrile 2e as a single diastereomer (> 98% de). The 4-cyanobutyl side chain was incorporated in a two-step procedure to yield dinitrile 4e. This latter compound was directly converted into spiropiperidine 5e by using the Thorpe-Ziegler annulation procedure. The overall sequence (4 steps, 43%) allows the construction of the basic carbon framework of perhydrohistrionicotoxin.