ECE reaction pathways in the electrochemical reduction of dicyanocobalamin: Kinetics of ligand substitution in vitamin B12r cyanocob(II)alamin

The reduction of dicyanocob(III)alamin leads in a first stage to monocyanocob(II)alamin which can be partially converted into the base-off and base-on Co(II) complexes (B12r). The latter species are easier to reduce than the starting Co(III) complex leading to a single two-electron wave at low cyanide concentrations and/or low diffusion rates. Upon raising one of these two parameters two successive one-electron waves tend to be obtained corresponding to the Co(III)/Co(II) and Co(II)/Co(I) conversion respectively. The kinetics of the reduction process is investigated using potential-dependent potentiostatic chronoamperometry which allows a simpler analysis than cyclic voltammetry for systems involving a slow initial charge-transfer step. It is seen that the second electron, at the level of the first wave, comes from the electrode and not from the cyano-Co(II) complex in the solution. The reduction thus follows an ECE rather than a DISP-type mechanism in conditions where they can be distinguished by the usual electrochemical kinetic techniques. This contrasts with that which occurs in organic electrochemistry where the electron transfers are generally fast, while in the present case they are slow. The analysis of the reduction kinetics as a function of cyanide concentration gives some insight into the mechanism of the ligand substitution reaction at the Co(II). The kinetic data are discussed in terms of SN1-, SN2- and SNAr-like mechanisms.     

Regiospecifically controlled formation of tetrasubstituted tributyltin ketone enolates catalyzed by a palladium complex

The palladium-catalyzed hydrostannolysis of α-disubstituted allyl β-keto esters yields the corresponding tributyltin β-keto carboxylates which loose carbon dioxide at very moderate temperature, thus leading to the regiospecific formation of tributyltin tetrasubstituted enolates.     

Chiral induction in quinoline-derived oligoamide foldamers: assignment of helical handedness and role of steric effects

Chiral groups attached to the end of quinoline-derived oligoamide foldamers give rise to chiral helical induction in solution. Using various chiral groups, diastereomeric excesses ranging from 9% to 83% could be measured by NMR and circular dichroism. Despite these relatively weak values and the fact that diastereomeric helices coexist and interconvert in solution, the right-handed or left-handed helical sense favored by the terminal chiral group could be determined unambiguously using X-ray crystallography. Assignment of chiral induction was performed in an original way using the strong tendency of racemates to cocrystallize, and taking advantage of slow helix inversion rates, which allowed one to establish that the stereomers observed in the crystals do correspond to the major stereomers in solution. The sense of chiral helical induction was rationalized on the basis of sterics. Upon assigning an Rs or Ss chirality to the stereogenic center using a nomenclature where the four substituents are ranked according to decreasing sizes, it is observed that Rs chirality always favors left-handed helicity and Ss chirality favors right-handed helicity (P). X-ray structures shed some light on the role of sterics in the mechanism of chiral induction. The preferred conformation at the stereocenter is apparently one where the bulkiest group should preferentially point away from the helix, the second largest group should be aligned with the helix backbone, and the smallest should point to the helix.     

About SnF2 stannous fluoride. IV. Kinetics of the α → γ and β, γ → α transitions

The kinetics of the reconstructive first order phase transitions α → γ (upon heating) and β, γ → α (upon cooling) of SnF₂ were studied by quantitative X-ray powder diffraction. The main feature of the kinetics is that these transformations are incomplete over a wide temperature range. Consequently it is not possible to fit the experimental data using the usual solid state rate expressions. Although these transitions are not reversible (large hysteresis) the empirical use of a kinetic model of a reversible transformation provides a good fit. The α → γ transformation was also investigated by D.T.A.; this transition was found to be greatly influenced by particle size: the transition temperature increases with grain size, and its enthalpy decreases. The X-ray investigation revealed that the process of the α → γ transformation involves an intermediate noncrystalline phase named the “transition phase.” It is suggested that the transition proceeds through a process of fragmentation-reconstruction.     

Interdependence of redox state,hydrogen bonding,anion recognition and charge partition in crystals of (EDT-TTF-CONHMe)6 [Re6Se8(CN)6] (CH3CN)2(CH2Cl2)2

Neutral pi-conjugated molecules and their radical cations co-exist in [(EDT-TTF-CONHMe+*)4(EDT-TTF-CONHMe0)2] [Re6Se8(CN)6]4- (CH3CN)2(CH2Cl2)2 whose crystal structure reveals that, upon one-electron oxidation, an activation of the N-H and C-H hydrogen bond donor ability is coupled to a deactivation of the hydrogen bond acceptor character of the carbonyl oxygen atom: this is expressed in the supramolecular hydrogen bond pattern and, ultimately, into charge localisation and partition in the solid state.     

Reagents for new heteroannelation reactions III. 2-(Methylthio)-2-thiazoline

Summary A variety of partly novel tri- and tetracyclic hetero systems were obtained by reaction of heteroaromatic 2-aminoesters with 2-(methylthio)-2-thiazoline, yielding double-annelation of a thiazolo[2,3-b]pyrimido moiety in a one-pot process.On leave from University of Chittagong, Bangladesh     

A microcomputer-controlled titrator for automated individual analysis

A titration unit for automatic analysis systems is described. The titrator performs different titrations specified by strings of digital parameters. It has 4 independent titration stations with individual electrode systems. A multiburette with 20 cylinders provides all stations with the necessary reagents. End-point titrations, and incremental and equilibrium titrations are controlled by a microcomputer. In combination with a sample transport and a desk calculator, the titrator can be used to process automatically samples of different natures which require different treatment.     

Dramatic changes in geometry after ionization: experimental and theoretical studies on the electronic properties of fluorocarbonyl (mono-, di-, and tri-) sulfur compounds

In this work, we present a complete study on He I photoelectron spectroscopy (PES) for the fluorocarbonyl mono-, di-, and trisulfur compounds FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F. After optimizations of the structure for stable conformers at different levels of theory, a complete theoretical study involving the calculation of the ionization energies using orbital valence Green's functional (OVGF) was performed. Calculations of radical-cationic forms were carried out in order to compare their properties with those of the neutral molecules. The first IP values are 10.7, 9.0, and 10.5 eV for FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F, respectively. The groups bonded to the S atom mainly influence the ionizations originating from the sulfur lone pairs. A wide electronic delocalization in the FC(O)S moiety can be deduced from experimental and theoretical results, which leads to a strong energetic stabilization of the n' '(S) (sulfur lone pair pi orbital). Other conclusions relate to effects on the substituents attached to the S atom and the importance of the molecular planarity in the orbital stabilization of the FC(O)S moiety for the neutral molecules. It is worthwhile mentioning that FC(O)SCl retains its planar structure after ionization, but drastic changes occur in the geometry of both FC(O)SSCH(3) and FC(O)SSSC(O)F. The FC(O)SSCH(3) molecule adopts a heavy atom planar structure after ionization. The FC(O)SSS moiety becomes a planar form after the ionization of the FC(O)SSSC(O)F molecule, whereas the second C(O)F group maintains its original conformation with respect to the SSS group.     

Effect of absolute laser phase on reaction paths in laser-induced chemical reactions

Potential surfaces, dipole moments, and polarizabilities are calculated by ab initio methods [unrestricted MP2(full)/6-311++G(2d,2p)] along the reaction paths of the F+CH4 and Cl+CH4 reaction systems. It is found that in general dipole moments and polarizabilities exhibit peaks near the transition state. In the case of X=F these peaks are on the products side and in the case of X=Cl they are on the reactants side indicating an early transition state in the case of fluorine and a late transition state in the case of chlorine. An analysis of the geometric changes along the reaction paths reveals a one-to-one correspondence between the peaks in the electric properties and peaks in the rate of change of certain internal geometric coordinates along the reaction path. Interaction with short infrared intense laser fields pulses leads to the possibility of interferences between the dipole and polarizability laser-molecule interactions as a function of laser phase. The larger dipole moment in the Cl+CH4 reaction can lead to the creation of deep wells (instead of energy barriers) and new strongly bound states in the transition state region. This suggests possible coherent control of the reaction path as a function of the absolute phase of the incident field, by significant modification of the potential surfaces along the reaction path and, in particular, in the transition state region.     

A thieno-2H-chromene alpha-amino acid derivative: synthesis and photochromic properties

[structure: see text] A new photochromic thieno-2H-chromene alpha-amino acid derivative was prepared by C-N palladium-catalyzed cross-coupling of a bromothieno-2H-chromene with the aminated aromatic side chain of the methyl ester of a N,N-diprotected amino acid. Its good photochromic properties demonstrated by flash photolysis and continuous irradiation indicate a possible application in ophthalmic lenses. It may also be inserted into peptides to give photoinduced reversible structural changes.