Characteristics of composites based on PMMA modified gel silica glasses

Gel silica glass prepared by the sol-gel process can be modified by incorporating an organic phase into the intrinsically porous inorganic gel matrix, which results in a composite material with much improved mechanical and optical properties. Characterisation of PMMA modified gel silica glass prepared by the in situ polymerisation method using FT-Raman spectroscopy, gel permeation chromatography and the nitrogen adsorption technique are reported. Some essential problems encountered in the preparation are discussed.     

Soluble rigid–flexible polyethers containing bis(biphenyl)anthracene or bis(styryl)anthracene units in the main chain for light-emitting applications

New rigid–flexible polyethers containing bis(biphenyl)anthracene or bis(styryl)anthracene units in the main chain were synthesized and characterized by viscosimetry, thermal and mechanical analysis, NMR, UV-vis, and luminescence spectroscopy. The polyethers containing bis(styryl)anthracene units in the main chain form free-standing films either from solution casting or after melt pressing at temperatures where they are thermally stable. The length of the flexible spacer influences the thermal and mechanical behavior of these polymers. The isotropization temperature as well as the glass transition temperature show an odd–even effect depending on the spacer segment length. Films with high modulus at room temperature and glass transition temperatures in the range 74–103°C were obtained using dynamic mechanical analysis. These polymers show bright-yellow photoluminescence with maximum at 580 nm in solution. In the solid state, the luminescence maximum is either red or blue shifted depending on the number of the methylene units in the aliphatic segment. The polyethers containing bis(biphenyl)anthracene units in the main chain are blue-light-emitting polymers with photoluminescence maxima at 435 and 455 nm in solution. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3826–3837, 1999     

GC-MS and LC-DAD-MS Phytochemical Profiling for Characterization of Three Native Salvia Taxa from Eastern Mediterranean with Antiglycation Properties

Salvia fruticosa and S. pomifera subsp. calycina are native to Eastern Mediterranean and S. pomifera subsp. pomifera is endemic to Greece. The primary aim of this study was to develop an analytical methodology for metabolomic profiling and to study their efficacy in combating glycation, the major biochemical complication of diabetes. After sequential ultrasound-assisted extraction of 2 g of leaves with petroleum ether and 70% methanol, the volatile metabolites in the petroleum ether extracts were studied with GC-MS (Gas Chromatography-Mass Spectrometry), whereas the polar metabolites in the hydroalcoholic extracts were determined and quantified by UHPLC-DAD–ESI-MS (Ultra-High Performance Liquid Chromatography–Diode Array Detector–Mass Spectrometry). This methodology was applied to five populations belonging to the three native taxa. 1,8-Cineole was the predominant volatile (34.8–39.0%) in S. fruticosa, while S. pomifera had a greater content of α-thujone (19.7–41.0%) and β-thujone (6.0–39.1%). Principal Component Analysis (PCA) analysis of the volatiles could discriminate the different taxa. UHPLC-DAD-ESI-MS demonstrated the presence of 50 compounds, twenty of which were quantified. PCA revealed that not only the taxa but also the populations of S. pomifera subsp. pomifera could be differentiated. All Salvia samples inhibited advanced glycation end-product formation in a bovine serum albumin/2-deoxyribose assay; rosmarinic and carnosic acid shared this activity. This study demonstrates the antiglycation activity of S. fruticosa and S. pomifera extracts for the first time and presents a miniaturized methodology for their metabolomic profiling, which could aid chemotaxonomic studies and serve as a tool for their authentication and quality control.     

Development and validation of a UPLC‐UV method for the determination of daptomycin in rabbit plasma

Daptomycin (DPT) is a lipopeptide antibiotic with potent bactericidal activity in vitro against Gram‐positive bacteria, which has attracted the attention of the scientific community due to its unique mechanism of action and due to the immediate need for new antibiotics in the era of multidrug resistance. In order to assess its pharmacokinetics in rabbits a new analytical method has been developed and validated using ultra performance liquid chromatography in conjugation with ultraviolet detection for the quantitation of the antibiotic in rabbit plasma, using the internal standard methodology. The separation was achieved employing a C₁₈ column with gradient elution using 0.1% aq. trifluoroacetic acid and methanol. The total analysis time was 2.5 min. The sample pretreatment employed protein precipitation with acetonitrile–methanol mixture and centrifugation. The method was validated in terms of linearity, precision, accuracy, sensitivity, robustness, short‐term and freeze–thaw stability and was applied to the quantification of DPT in plasma samples obtained from rabbits treated with 25 mg kg^?1 DPT. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of the Mg-Concentration Profile in Near-Surface Layers of Materials Using the 24Mg(α,p)27Al Nuclear Reaction

 The ²⁴Mg(α, p)²⁷ Al nuclear reaction was applied for the determination of the magnesium distribution in near-surface layers of materials. The cross sections of this reaction were determined in the energy region between 4.5 and 5.5 MeV in steps of 5 to 10 KeV (θ_lab : 158°) using thin magnesium films. The investigated projectile energy region included five main resonances allowing the determination of magnesium. The uncertainty of the cross-section determination was of the order of 7%. The applicability of the technique was tested using Mg-implanted AISI 321 steel samples. Depth resolution of 100 nm and detection limits of the order of 0.1 ppm were achieved for the determination of magnesium in steel samples using the 4805 keV resonance of the ²⁴Mg(α, p)²⁷ Al nuclear reaction. The shape and height of the magnesium depth-profile in the Mg-implanted steel samples were compared with corresponding values obtained by X-ray photoelectron spectroscopy. Received July 15, 1999. Revision March 30, 2000.     

Magnetic field-induced reactions on the surface of chloroaluminum phthalocyanine thin films

The μ-(oxo)bis[phthalocyaninato] aluminum(III) (AlPc)(2)O films, with the crystallites oriented preferably in one direction, were obtained via chemical transformation of chloroaluminum(III) phthalocyanine AlClPc film upon its annealing in magnetic field. A comparative analysis of the influence of postdeposition annealing without and under applied magnetic field of 1 T on composition and morphology of AlClPc films has been carried out. The chemical transformation of AlClPc to (AlPc)(2)O on the substrate surface is studied by the methods of UV-vis and infrared spectroscopies, Raman, x-ray photoelectron spectroscopy as well as atomic force microscopy. Two interesting effects were observed upon heating the AlClPc films in magnetic field of 1 T. First, the temperature of the chemical transformation of AlClPc to (AlPc)(2)O decreased from 300 °C to 200 °C when magnetic field was applied during postdeposition annealing. Second, the formation of (AlPc)(2)O films with elongated crystallites with a preferential orientation was observed. The heating of (AlPc)(2)O films in a magnetic field at the same conditions did not demonstrate any effect on the structure and morphology of these films.     

Statistical copolymers of norbornene and 5‐vinyl‐2‐norbornene by a ditungsten complex mediated ring‐opening metathesis Polymerization: Synthesis,thermal properties,and kinetics of thermal decomposition

Statistical copolymers of norbornene (NBE) with 5‐vinyl‐2‐norbornene (VNBE) were prepared by ring‐opening metathesis polymerization, employing the triply bonded ditungsten complex Na[W₂(μ‐Cl)₃Cl₄(THF)₂].(THF)₃. NMR measurements revealed that the side vinyl groups of the VNBE monomer remain intact during the copolymerization reaction. The reactivity ratios were estimated using the Finemann–Ross (FR), the inverted FR, and the Kelen–Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions, which were derived using the monomer reactivity ratios. The glass transition temperatures, T_g, of the copolymers were measured by differential scanning calorimetry measurements and were examined in the frame of several theoretical equations allowing the prediction of these T_g values. The best fit was obtained using methods that take into account the monomer sequence distribution of the copolymers. Finally, the kinetics of the thermal decomposition of the copolymers was studied by thermogravimetric analysis in the frame of the Ozawa–Flynn–Wall and Kissinger methods. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4835–4844     

A new rhodium complex with a nitrogen‐containing bis(phosphine oxide) ligand as an efficient catalyst for the hydroformylation of styrene

A new rhodium complex with a nitrogen‐containing bis(phosphine oxide) ligand has been synthesized. The complex was applied to hydroformylation of styrene and displayed high activity and regioselectivity towards the branched aldehyde, which was found to be higher than those of the tertiary bis(phosphine) analogue. Copyright © 2006 John Wiley & Sons, Ltd.     

Selective stopped-flow sequential injection method for the spectrophotometric determination of titanium in dental implant and natural Moroccan phosphate rock

The present work reports the first sequential injection (SI) method for the spectrophotometric determination of Ti(IV). The method is based upon the reaction of Ti(IV) with chromotropic acid (CA) in acidic medium to form a water-soluble complex (λ_max = 420 nm). The chemical and instrumental variables of the system that affected the reaction were studied. Selectivity was greatly enhanced using ascorbic acid. A linear calibration graph was obtained in the range 0.2-10.0 mg l⁻¹ Ti(IV) at a sampling frequency of 24 h⁻¹. The precision was satisfactory (s_r = 1.5% at 5.0 mg l⁻¹ Ti(IV), n = 12) and the 3σ limit of detection, c_L, was 0.7 mg l⁻¹ (n = 10). The developed method proved to be adequately selective and was applied successfully to the analysis of real samples (dental implant and natural Moroccan phosphate rock) giving accurate results based on recovery studies (98-105%).     

Synthesis of novel nitro-substituted triaryl pyrazole derivatives as potential estrogen receptor ligands

Novel tetrasubstituted pyrazole derivatives bearing a nitro substituent on their A-phenol ring were synthesized and their binding affinity towards the estrogen receptor (ER) subtypes ERalpha and ERbeta was determined. Among compounds tested, the 2-nitrophenol derivative 5c was found to bind satisfactorily to both estrogen receptor subtypes (RBAalpha=5.17 and RBAbeta=3.27). In general, the introduction of a nitro group into the A ring of these compounds was found to benefit their ERbeta binding abilities.