Adsorption energy and geometry of physisorbed organic molecules on Au(1 1 1) probed by surface-state photoemission

The modification of the Au(1 1 1) Shockley-type surface state by an adsorbed monolayer of large π-conjugated molecules was investigated by high-resolution angle-resolved photoelectron spectroscopy (ARPES). We determined binding energy, band mass, and Rashba-splitting and discuss the results in the context of rare-gas adsorption on noble metals. This comparison allows the determination of the bonding strength of the adsorbates, found to be physisorptive with derived binding energies per molecule of 2.0 eV for perylene-tetracarboxylic-dianhydride (PTCDA) and 1.5 eV for naphtalene-tetracarboxylic-dianhydride (NTCDA). We will also present a superstructure model for the NTCDA/Au(1 1 1) system, deduced from low energy electron diffraction images (LEED) in combination with substrate band-backfolding.     

Photonic and electrochemical properties of adsorbed [Ru(dpp)2(Qbpy)]2+ luminophores

Dense monolayers of [Ru(dpp)2Qbpy]2+, where dpp is 4,4'-diphenylphenanthroline and Qbpy is 2,2':4,4' ':4'4' '-quarterpyridyl, have been formed by spontaneous adsorption onto clean platinum microelectrodes. The cyclic voltammetry of these monolayers is nearly ideal, and three redox states are accessible over the potential range of +/-1.3 V. Chronoamperometry conducted on the microsecond time scale has been used to probe the dynamics of heterogeneous electron transfer and indicates that the standard heterogeneous electron-transfer rate constant, k degrees , is approximately 106 s-1. The metal complex emits at approximately 600 nm in fluid and solid solution as well as when bound to a platinum electrode surface within a dense monolayer. In the case of the monolayers, it appears that the excited states are not completely deactivated by radiationless energy transfer to the metal because electronic coupling between the adsorbates and the electrode is weak. The dynamics of lateral electron transfer between the electronically excited Ru2+* and ground-state Ru3+ species has been explored by measuring the luminescence intensity after defined quantities of Ru3+ have been produced electrochemically within the monolayer. The rate of lateral electron transfer is between 8 x 106 and 3 x 108 M-1 s-1, indicating efficient electron transfer between adsorbates in close-packed assemblies. Voltammetry conducted at megavolt per second scan rates has been used to directly probe the redox properties of the electronically excited species.     

Self assembled composites of luminescent Ru(II) metallopolymers and the Dawson polyoxometalate α-[Mo18O54(SO4)2]4-

The interaction of two luminescent metallopolymers; [Ru(bpy)(2)(PVP)(10)](2+) and [Ru(bpy)(2)(CAIP)co-poly(7)](+), where bpy is 2,2'-bipyridyl, PVP is polyvinylpyridine, and (CAIP)co-poly(7) is poly(styrene(6)-co-p-(aminomethyl)styrene) amide linked to 2-(4-carboxyphenyl)imidazo[4,5-f] [1,10]phenanthroline, with the Dawson polyoxomolybdate α-[Mo(18)O(54)(SO(4))(2)](4-) is described. Both metallopolymers undergo electrostatic association with the polyoxometalate. From both electronic and luminescence spectroscopy the thermodynamic products were determined to be {[Ru(bpy)(2)(PVP)(10)](4.5)[Mo(18)O(54)(SO(4))(2)]}(5+) and {[Ru(bpy)(2)(CAIP)co-poly(7)](5)[Mo(18)O(54)(SO(4))(2)]}(+), i.e. in both instances, the number of ruthenium centres in the cluster exceeds the number required for charge neutralization of the molybdate centre. Association quenches the luminescence of the metallopolymer although, consistent with the excess of Ru(ii) present in the associated composites, emission is not completely extinguished even when a large excess of [Mo(18)O(54)(SO(4))(2)](4-) is present. The observed emission lifetime was not affected by [Mo(18)O(54)(SO(4))(2)](4-) therefore quenching was deemed static. The luminescent intensity data was found to fit best to a (sphere of action) Perrin model from which the radii of the quenching were calculated as 4.6 ? and 5.8 ? for [Ru(bpy)(2)(PVP)(10)](2+) and [Ru(bpy)(2)(CAIP co-poly)(7)](+) respectively. Both UV/Vis and resonance Raman data indicate the presence of a new optical transition centered around 490 nm for the composite, {[Ru(bpy)(2)(PVP)(10)](4.5)[Mo(18)O(54)(SO(4))(2)]}(5+) but not for {[Ru(bpy)(2)(CAIP)co-poly(7)](5)[Mo(18)O(54)(SO(4))(2)]}(+). This indicates strong electronic interaction between the metal centres in the former composite, which despite good thermodynamic analogy, is not observed for {[Ru(bpy)(2)(CAIP)co-poly(7)](5)[Mo(18)O(54)(SO(4))(2)]}(+). These results are consistent with photoelectrochemical studies of layer by layer assemblies of these films which indicate that the ruthenium centre sensitizes polyoxometalate photo-oxidation of benzyl alcohol in {[Ru(bpy)(2)(PVP)(10)](4.5)[Mo(18)O(54)(SO(4))(2)]}(5+) but not in {[Ru(bpy)(2)(CAIP)co-poly(7)](5)[Mo(18)O(54)(SO(4))(2)]}(+).     

Enhanced photocurrent production from thin films of Ru(II) metallopolymer/Dawson polyoxotungstate adducts under visible irradiation

Thin films of polyoxometalates that are sensitized with a Ru(II) metallopolymer generate significant photocurrents in the presence of benzyl alcohol and visible light. Significantly, the photocurrent generated by the tungstate based adduct, α-[P(2)W(18)O(62)](6-), is approximately seven fold larger than that found for the Dawson polyoxomolybdate α-[S(2)Mo(18)O(62)](4-).     

Fusion around the barrier for 7Li+12C

Fusion cross-sections for the ⁷Li + ¹²C reaction have been measured at energies above the Coulomb barrier by the direct detection of evaporation residues. The heavy evaporation residues with energies below 3 MeV could not be separated out from the α-particles in the spectrum and hence their contribution was estimated using statistical model calculations. The present work indicates that suppression of fusion cross-sections due to the breakup of ⁷Li may not be significant for ⁷Li + ¹²C reaction at energies around the barrier.     

Electron self-exchange in the solid-state: cocrystals of hydroquinone and bipyridyl triazole.

Solid-state voltammetry, spectroscopy, and microscopy studies have been used to probe the proton and electron conductivity within a self-assembled cocrystal, HQBpt. This crystallographically defined material contains 3,5-bis(pyridin-2-yl)-1,2,4-triazole, HBpt, dimers that are pi-stacked and hydrogen bonded to 1,4-hydroquinone, H(2)Q, in a herringbone arrangement. When deposited onto platinum microelectrodes, the cocrystal exhibits a well-defined voltammetric response corresponding to oxidation of H(2)Q to the quinone, Q, across a wide range of voltammetric time scales, electrolyte compositions, and pH values. Scanning electron microscopy reveals that redox cycling in aqueous perchlorate solutions in which the pH is systematically varied from 1 to 7 triggers electrocrystallization and the extensive formation of rodlike crystals. Fast scan rate voltammetry reveals that the homogeneous charge transport diffusion coefficient, D(app), is independent of the perchlorate concentration for 0.1 < [ClO(4)(-)] < 1.0 M (pH 6.6) at 3.14 +/- 0.11 x 10(-)(9) cm(2) s(-)(1). Moreover, D(app) is independent of the perchloric acid concentration for concentrations greater than approximately 2.0 M, maintaining a value of 4.81 +/- 0.07 x 10(-)(8) cm(2) s(-)(1). The observation that D(app) is independent of the supporting electrolyte suggests that the rate-determining step for homogeneous charge transport is not the availability of charge-compensating counterions or protons, but the dynamics of electron self-exchange between H(2)Q and Q. We have used the Dahms-Ruff formalism to determine electron self-exchange rate constants which are 2.84 +/- 0.22 x 10(9) and 9.69 +/- 0.73 x 10(10) M(-)(1) s(-)(1) for pH values greater than approximately 2.0 and less than -0.3, respectively. Significantly, these values are more than 2 orders of magnitude larger that those found for benzoquinone self-exchange reactions in aqueous solution. These results indicate that hydrogen bonds play an important role in supporting rapid electron transfer. The increase in D(app) between pH 1.0 and -0.3 is associated with protonation of the HBpt moieties, which triggers a reversible change in the material's structure.     

Advantages and Limitations of Solid Layer Experiments in Muon Catalyzed Fusion

Since the discovery that muonic deuterium at energies near a few eV could travel distances of the order of 1 mm in condensed hydrogen, and in particular that muonic tritium and muonic deuterium could emerge from the surface of a solid hydrogen layer, the advantages of solid targets have enabled the study of several processes important in muon catalyzed fusion. A review of the results is presented, emphasizing the strengths and limitations of the use of solid hydrogen layer targets. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mössbauer study of illite associated with iron oxi-hydroxides

An illite separated from mylonites from the southern rim of the Bohemian massif was studied by Mössbauer spectroscopy at temperatures between 300 and 1.8 K. The iron is mainly contained in oxides associated with the illite. Only 13% of the iron are structural Fe³⁺ and Fe²⁺ within the clay mineral matrix. The transformations of the oxidic iron during heating at temperatures up to 1250°C were followed by Mössbauer measurements at 300 and 4.2 K.