Facile Conversion of Epoxides to Thiiranes with Ammonium Thiocyanate Catalyzed with Oxalic Acid

Epoxids are efficiently converted to the corresponding thiiranes by ammonium thiocyanate (NH 4 SCN) in the presence of catalytic amounts of oxalic acid with excellent isolated yields under mild and nonaqueous reaction conditions. This conversion performed under both conventional heating and microwave conditions. Distinct rate enhancement is observed under microwave irradiation.     

Quenching effect of l-tyrosine on peroxyoxalate chemiluminescence of berberine as the fluorophore

The present work deals with the first attempt to study the effect of l-tyrosine on the characteristics of the peroxyoxalate chemiluminescence. Berberine was applied as an efficient fluorophore. The investigated parameters include rise and fall rate constant for the chemiluminescence burst, theoretical and experimental maximum intensity, the time needed to reach maximum intensity and the total light yield emission, which is theoretically evaluated using the pooled intermediate model by a computerized non-linear least-squares curve fitting program (KINFIT). Furthermore, based on the observed quenching effect of tyrosine, the Stern–Volmer plot with K _Q value of 7.7 × 10⁴ M^?1 in the quencher concentration range 4 × 10^?6–5 × 10^?5 M. Moreover, this method is applied to determinate tyrosine in biological samples successfully.     

An Efficient One‐Pot Four‐Component Synthesis of Functionalized Imidazo[1,2‐a]pyridines

An efficient one‐pot four‐component protocol for the synthesis of imidazo[1,2‐a]pyridines was developed by condensing ethane‐1,2‐diamine ( 2 ), 1,1‐bis(methylthio)‐2‐nitroethene ( 1 ), aldehydes 3 , and activated methylene compounds in EtOH under reflux conditions (Tables 1–3). The features of this procedure are operational simplicity, good yields of products, in situ preparation of heterocyclic ketene aminals (HKA), and catalyst‐free conditions.     

Pertraction of methylene blue using a mixture of D2EHPA/M2EHPA and sesame oil as a liquid membrane

An experimental study on the pertraction of methylene blue (MB) through a supported liquid membrane (SLM) using a mixture of mono-(2-etylhexyl) ester of phosphoric acid (M2EHPA) and bis-(2-etylhexyl) ester of phosphoric acid (D2EHPA) and sesame oil as the liquid membrane (LM) was performed. Parameters affecting the pertraction of MB such as initial MB concentration, carrier concentration, feed phase pH, and stripping phase concentration were analyzed. Optimal experimental conditions for MB pertraction (permeability of 5.63 × 10^?6) were obtained after a 7 h separation with the MB concentration in the feed phase of 80 mg L^?1, D2EHPA/M2EHPA concentration in membrane phase of 40 vol. %, feed pH of 6, and acetic acid concentration in the stripping phase of 0.4 mol L^?1. Kinetics of transport and stability of the SLM system were also studied and the mass transfer coefficient for this system was evaluated. Scanning electron microscopy (SEM) was used to morphologically characterize the membrane surface.     

Palladium-catalyzed oxidative C–H bond coupling of indoles and benzaldehydes: a new approach to the synthesis of 3-benzoylindoles

A palladium-catalyzed dehydrogenative acylation of indoles using easily accessible aldehydes as the acyl source is described. This reaction provides a new approach for the synthesis of 3-acylindoles.     

Solid-Phase Microextraction of Phthalate Esters from Aqueous Media by Functionalized Carbon Nanotubes (Graphene Oxide Nanoribbons) and Determination by GC–FID

Multiwalled carbon nanotubes were exposed to hydrothermal treatment for obtaining graphene oxide nanoribbons (GONRs). The fabricated graphene oxide nanoribbons have been morphologically and compositionally characterized via FE-SEM, XRD, and FT-IR techniques. The as-synthesized GONRs have been used as sorbent phase for headspace solid-phase microextraction of phthalate esters (PEs) from aqueous solutions. In this regard, the GC–FID analysis route has been used for quantification of PEs. The new SPME fiber shows remarkable analytical figures of merit including broad dynamic linear ranges, low limits of detection, as well as good stability and reasonable relative standard deviations for evaluation of PEs. The linearity of the method for analysis of PEs including DnBP, DnPP, DEHP, DEHA, BBP, and DMP was between the range of 0.05–100, 0.05–100, 0.1–100, 0.1–100, 0.2–100, and 0.5–100 μg L^?1, respectively. The limits of detection (based on S/N?=?3) and correlation coefficients were found to be in the range of 0.02–0.2 μg L^?1 and 0.9907–0.9952, correspondingly. The prepared GONR-coated SPME fiber shows larger extraction yield in comparison to pristine MWNTs and commercial PDMS SPME fibers. Furthermore, real sample analysis showed that there is no significant matrix effect for evaluation of PEs from environmental water samples and proposed method could be used for evaluation and determination of PEs from aqueous samples in a precise and accurate manner. The existence of functional groups, π–π interactions, as well as hydrogen bonding between adsorbent phase and PE analytes could be the reason for observing such a high extraction yield.

     

Electrochemical Determination of Dextromethorphan on Reduced Graphene Oxide Modified Screen‐Printed Electrode after Electromembrane Extraction

In this paper, electromembrane extraction coupled with differential pulse voltammetry (DPV) on a reduced graphene oxide modified screen‐printed carbon electrode (RGO‐SPCE) for the determination of dextromethorphan (DXM) in urine and plasma has been described. DXM migrated from 4 mL of a donor phase across a thin layer of 2‐nitrophenyl octyl ether (NPOE) immobilized in the pores of a porous hollow fiber, into a 20 µL acceptor phase (HCl) present inside the lumen of the fiber. Then, 15 µL of a 0.1 M NaOH solution was added to the acceptor phase and the mixture was analyzed using DPV.     

Thermodynamic Consistency Test of Vapor–liquid Equilibrium Data of Binary Systems Including Carbon Dioxide (CO 2 ) and Ionic Liquids Using the Generic Redlich–Kwong Equation of State

The thermodynamic consistency test of solubility P–T–x data for binary mixtures including carbon dioxide (CO2) + a room temperature ionic liquid has been investigated. Experimental solubility data taken from the open literature for 32 binary mixtures of CO2/RTILs contains 80 isotherms. The applied consistency test is based on the fundamental Gibbs–Duhem equation with use of the generic Redlich–Kwong (GRK) equation of state (EoS) coupled with the van der Waals–Berthelot (GRK/vdWB) mixing rule. The optimum parameters were obtained by minimizing the summation of per cent relative deviations between modeled and experimental data, based on the bubble pressure algorithm. Modeling was found acceptable for all isotherms, which demonstrated the usability of the GRK equation of state. Results of the thermodynamic consistency test showed that 36 of the isothermal data sets were thermodynamically consistent, 37 were not fully consistent, 6 were thermodynamically inconsistent and only one data set was found to need another model.     

One-pot synthesis of 1,2,3-triazole linked dihydropyrimidinones via Huisgen 1,3-dipolar/Biginelli cycloaddition

The combination of the Biginelli reaction with click chemistry has been used for the one-pot synthesis of 1,2,3-triazole linked dihydropyrimidinones from azides, aromatic aldehydes containing a propargyl ether group, urea, and 1,3-dicarbonyl compounds using Cu(OAc)₂/sodium ascorbate as catalyst in acetic acid under mild reaction conditions.