Representation of type I heterostructure junctionless tunnel field effect transistor for high-performance logic application

In this paper, a gate-all-around junctionless tunnel field effect transistor (JLTFET) based on heterostructure of compound and group III–V semiconductors is introduced and simulated. In order to blend the high tunneling efficiency of narrow band gap material JLTFETs and the high electron mobility of III–V JLTFETs, a type I heterostructure junctionless TFET adopting Ge–Al _x Ga_1?x As–Ge system has been optimized by numerical simulation in terms of aluminum (Al) composition. To improve device performance, we considered a nanowire structure, and it was illustrated that high-performance logic technology can be achieved by the proposed device. The optimal Al composition founded to be around 20 % (x = 0.2). The numerical simulation results demonstrate that the proposed device has low leakage current I _OFF of ~1.9 × 10^?17, I _ON of 4 µA/µm, I _ON/I _OFF current ratio of 1.7 × 10¹¹ and subthreshold swing SS of 12.6 mV/decade at the 40 nm gate length and temperature of 300 K.     

Synthesis of CdS Quantum Dots Using Direct Plasma Injection in Liquid Phase

In this work, we introduce a new method using non-equilibrium atmospheric pressure plasma jet (N-APPJ) for the synthesis of semiconductor quantum dots in liquid media with low power consumption at room temperature. In this method, the solution containing CdSO₄, Na₂S₂O₃ and thioglycolic acid (TGA) was treated by N-APPJ. Firstly, the key role of plasma applied voltage on the power consumption and the produced plasma reactive species was considered. We then continue to demonstrate that the optical properties such as absorption and photoluminescence of cadmium sulfide quantum dots (QDs) can carefully be controlled with the plasma parameters. Here, the effects of two major plasma parameters such as the plasma applied voltage and treatment time on the size of CdS QDs were investigated. The size of nanoparticles increases with the increase of the voltage and treatment time. It was also displayed that the change of the concentration of Na₂S₂O₃ and TGA in the solution had no significant effect on the size of QDs in plasma method. Finally, X-ray diffraction, X-ray fluorescence spectrometry and transmission electron microscopy were employed to determine the composition, size and crystallinity of prepared CdS QDs.     

Synthesis of cobalt-based magnetic nanocrystals from cobalt(II) heterocyclic amine complexes

Research on Chemical Intermediates - Cobalt nanocrystals with different morphologies and magnetic properties were prepared from three cobalt(II) heterocyclic amine precursors in alcoholic solution...     

Magnetic nanoparticles grafted <Emphasis Type="SmallCaps">l</Emphasis>-carnosine dipeptide: remarkable catalytic activity in water at room temperature

Modification of magnetic nanoparticle surface with l-carnosine dipeptide was developed using a simple chemical process. In order to synthesize this catalyst system, first, magnetic nanoparticles were modified with vinyl groups using trimethoxy(vinyl)silane. Next, the vinyl groups were oxidized with H₂O₂ to give the epoxy-functionalized MNPs. Reaction of l-carnosine with epoxide rings via amino group resulted in the functionalization of MNPs surface with l-carnosine, covalently. To explore high catalytic activity of this material, l-carnosine grafted on magnetic nanoparticles (Fe₃O₄@SiO₂@LCar; l-CarMNP) was used as a highly efficient heterogeneous nano-organocatalyst in a multicomponent reaction in aqueous medium at room temperature. It was reusable at least for eight times without a significant decrease in its catalytic activity. The catalytic activity of l-CarMNP was compared with other magnetic nano-organocatalyst, and results demonstrate that l-CarMNP has high catalytic activity related to others tested.     

Synthesis and photoluminescent and nonlinear optical properties of manganese doped ZnS nanoparticles

In this work we synthesized ZnS:Mn²⁺ nanoparticles by chemical method using PVP (polyvinylpyrrolidone) as a capping agent in aqueous solution. The structure and optical properties of the resultant product were characterized using UV-vis optical spectroscopy, X-ray diffraction (XRD), photoluminescence (PL) and z-scan techniques. UV-vis spectra for all samples showed an excitonic peak at around 292 nm, indicating that concentration of Mn²⁺ ions does not alter the band gap of nanoparticles. XRD patterns showed that the ZnS:Mn²⁺ nanoparticles have zinc blende structure with the average crystalline sizes of about 2 nm. The room temperature photoluminescence (PL) spectrum of ZnS:Mn²⁺ exhibited an orange-red emission at 594 nm due to the ⁴T₁-⁶A₁ transition in Mn²⁺. The PL intensity increased with increase in the Mn²⁺ ion concentration. The second-order nonlinear optical properties of nanoparticles were studied using a continuous-wave (CW) He-Ne laser by z-scan technique. The nonlinear refractive indices of nanoparticles were in the order of 10⁻⁸ cm²/W with negative sign and the nonlinear absorption indices of these nanoparticles were obtained to be about 10⁻³ cm/W with positive sign.     

Determination of haloperidol in biological samples with the aid of ultrasound‐assisted emulsification microextraction followed by HPLC‐DAD

A rapid and simple quantitative method for preconcentration and determination of haloperidol in biological samples was developed using ultrasound‐assisted emulsification microextraction, based on the solidification of floating organic droplet combined with HPLC‐DAD. The effects of several factors were investigated. A total of 30 μL of 1‐undecanol as an extraction solvent was injected slowly into a glass‐centrifuge tube containing 4 mL alkaline sample solution that was located inside the ultrasonic water bath. The formed emulsion was centrifuged and the fine droplets of solvent were floated at the top of the test tube, then it was cooled in an ice bath and the solidified solvent was transferred into a conical vial, after melt, the analysis of the extract was carried out by HPLC. Under the optimal conditions, the extraction efficiencies were more than 90% and the preconcentration factors were obtained between 119–122. The LOQs were obtained between 4–8 μg/L and the calibration curves were linear within the range of 4–1000 μg/L. Finally this method was applied to the determination of haloperidol in plasma and urine samples in the range of μg/L and satisfactory results were achieved (RSDs <7%).     

Preparation,characterization and use of new lignocellulose-based bio nanocomposite as a heterogeneous catalyst for sustainable synthesis of pyrimido benzazoles

A sustainable combinatorial synthesis of densely substituted pyrimido [1,2-b] benzazole derivatives in water under microwave irradiation was performed using a new lignocellulose-based bio nanocomposite (BNC) as heterogeneous catalyst. The lignocellulosic waste peanut shells (LCWPS) were turned into a value-added product, a new BNC PS/ZnO, which was prepared via in situ hydrothermal synthesis. The as-prepared BNC was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction spectrum. PS/ZnO has been successfully used in a sustainable catalytic method for the synthesis of pyrimido [1, 2-b] benzazole derivatives in water under microwave irradiation. The time of this reaction was significantly reduced. This catalytic system has a very high turnover number (TON?～?10³) and turnover frequency (TOF?～?10^5?h^?1). This paper presents the benefit of sustainable management of LCWPS, a bio-sourced polymeric carbohydrate for production of new nanocatalyst.     

Pyrrole adsorption on aluminum nitride nanotubes on DFT data

The adsorption behavior of pyrrole molecule with external surface of (5.0) on zigzag aluminum nitride nanotube (AlNNT) was studied using density functional theory calculations. It was found that the adsorption energy (E_ad) of pyrrole on the surface of pristine nanotubes is about–11.99 kcal/mol. However, when nanotubes have been doped with P atom, the adsorption energy of pyrrole was increased. Calculation showed that for the phosphorus-doped nanotube the adsorption energy range is about–9.04 to?12.80 kcal/mol. AlNNT is a suitable adsorbent for pyrrole, so it can be used in adsorption and separation processes involving pyrrole. The doped AlNNT can potentially be used for pyrrole sensors for detection in environmental systems.     

Ordered mesoporous SBA‐15 functionalized with yttrium(III) and cerium(III) complexes: Towards active heterogeneous catalysts for oxidation of sulfides and preparation of 5‐substituted 1H‐tetrazoles

Mesoporous SBA‐15 was synthesized and modified with 3‐chloropropyltrimethoxysilane and then used in immobilization of creatinine groups, which were employed to introduce Y³⁺ and Ce³⁺ to give rise to two novel yttrium and cerium catalysts: SBA‐15@Creatinine@M (M = Y and Ce). The structures of the SBA‐15@Creatinine@M catalysts were determined using various techniques. These catalysts offered outstanding catalytic performances in the oxidation of sulfides to sulfoxides and in the preparation of 5‐substituted 1H‐tetrazoles. An important characteristic of the SBA‐15@Creatinine@M catalysts is that they are very stable without a considerable decrease in their catalytic performance lasting seven cycles.     

Simply synthesized TiO_2 nanorods as an effective scattering layer for quantum dot sensitized solar cells

TiO2 nanorod layers are synthesized by simple chemical oxidation of Ti substrates. Diffuse reflectance spectroscopy measurements show effective light scattering properties originating from nanorods with length scales on the order of one micron. The films are sensitized with CdSe quantum dots （QDs） by successive ionic layer adsorption and reaction （SILAR） and integrated as a photoanode in quantum dot sensitized solar cells （QDSCs）. Incorporating nanorods in photoanode structures provided 4- to 8-fold enhancement in light scattering, which leads to a high power conversion efficiency, 3.03% （Voc = 497 mV, Jsc = 11.32 mA/cm2, FF = 0.54）, in optimized structures. High efficiency can he obtained just by tuning the photoanode structure without further treatments, which will make this system a promising nanostructure for efficient quantum dot sensitized solar cells.