Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

Thermo‐ and Acid‐Responsive Photochromic Spironaphthoxazine‐Containing Organogelators

A series of photochromic spironaphthoxazine derivatives has been designed, synthesized, and characterized by using ¹H NMR spectroscopy, FAB mass spectrometry, and elemental analysis. Their photophysical and photochromic behavior have been investigated. Two of the compounds (G¹²‐en‐SA‐SO and G¹⁶‐en‐SA‐SO) have been shown to be capable of forming stable thermoreversible organogels in organic solvents, tested by the “stable‐to‐inversion of a test tube” method. Addition of p‐toluenesulfonic acid was found to induce the formation of stable organogels at concentrations below that of the critical gelation concentration (c.g.c.), with a concomitant change in color from colorless to purple. Transmission electron microscopy and scanning electron microscopy of the xerogels showed typical fibrous structures in the micrometer scale. The activation parameters for the bleaching reaction of G⁸‐en‐SA‐SO in the solution state and G¹⁶‐en‐SA‐SO in the gel state have been determined in ethanol through kinetic studies at various temperatures. The results showed that the rate of the bleaching reaction in the gel state was much slower than that in the solution state.     

Determination of senkirkine and senecionine in Tussilago farfara using microwave-assisted extraction and pressurized hot water extraction with liquid chromatography tandem mass spectrometry

Tussilago farfara (Kuan Donghua) is an important Chinese herbal medicine which has been shown to contain many bioactive compounds and widely used to relieve cough and resolve phlegm. However, besides therapeutic bioactive compounds, this herb has been found to contain toxic pyrrolizidine alkaloids (PAs), mainly senkirkine and traces of senecionine. In this report, conditions for microwave-assisted extraction (MAE) and pressurized hot water extraction (PHWE) were optimized for the extraction of the PAs. The results were compared against heating under reflux. It was found that the binary mixture of MeOH:H₂O (1:1) acidified using HCl to pH 2-3 was the optimal solvent for the extraction of the PAs in the plant materials. Liquid chromatography (LC) with ultra-violet (UV) detection and electrospray ionization mass spectrometry (ESI-MS) in the positive mode was used for the determination and quantitation of senkirkine and senecionine in the botanical extract. The proposed extraction methods with LC/MS allow for the rapid detection of the major and the minor alkaloids in T. farfara in the presence of co-eluting peaks. With LC/MS, the quantitative analysis of PAs in the extract was done using internal standard calibration and the precision was found to vary from 0.6% to 5.4% on different days. The limits of detection (LODs) and limits of quantitation (LOQs) for MAE and PHWE were found to vary from 0.26 μg/g to 1.04 μg/g and 1.32 μg/g to 5.29 μg/g, respectively. The method precision of MAE and PHWE were found to vary from 3.7% to 10.4% on different days. The results showed that major and minor alkaloids extracted using MAE and PHWE were comparable to that by heating under reflux. Our data also showed that significant ion suppression was not observed in the analysis of senkirkine and senecionine in the botanical extracts with co-eluting peaks.     

Dynamical force and imaging characterization of superhydrophobic surfaces

We devised a dangling cantilever optical lever setup with imaging that permits dynamical studies of superhydrophobic surfaces without the effects of gravitational acceleration for better insight into the mechanics. The setup enabled us to ascertain liquid loss and ascribe it to the interaction of liquid that just touched the superhydrophobic surface as it translated at various constant lateral speeds. At lower speeds (20-60 μm/s), the interactions were characterized by a strong initial liquid pin (at up to 0.6 nN force) and depin followed by a series of smaller force pin and depins before sufficient liquid loss led to total liquid detachment from the surface. At higher translation speeds (80-100 μm/s), the interactions were characterized by liquid pinning and depinning processes at a sustained force (around 0.7 nN) in which liquid loss was low enough to engender a much later liquid detachment (beyond 100 s). A linear reduction of the receding contact angle with time, but not with the advancing contact angle, was found up to the point of first liquid depinning. This suggested a stronger role played by the receding contact line in establishing liquid adherence to the superhydrophobic surface. The detachment process from the surface was also characterized by a liquid bridge driven to rupture by way of liquid being conveyed away from the bridge.     

Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

Polyoxyethylene as the stationary phase in ion chromatography

The present article reviews the use of polyethylene glycol (PEG) or polyoxyethylene (POE) as the stationary phase for the separation of inorganic anions in ion chromatography and discusses about the retention mechanisms involved in the separation of anions on the novel stationary phases. PEG permanently coated on a hydrophobic stationary phase retained anions in the partition mode and allowed us to use high-concentration eluents because the retention of anions increased with increasing eluent concentration for most of the eluents. This situation was convenient to determine trace anions contained in seawater samples without any disturbance due to matrices. Chemically bonded POE stationary phases retained not only anions but also cations. Anions were retained in the ion-exchange mode, although POE chains possess no ion exchange sites. The retention behavior suggested that eluent cations could be trapped among multiple POE chains via ion-dipole interaction, and that the trapped cations worked as the anion-exchange sites. Anions could be separated using crown ether, i.e., cyclic POE, as the eluent additive with a hydrophobic stationary phase, where analyte anions were retained via electrostatic interaction with the eluent cation trapped on the crown ether.     

Simultaneous determination of inorganic cations by capillary ion chromatography with a non-suppressed contactless conductivity detector

A non-suppressed capillary ion chromatographic method with a laboratory-made packed cation-exchange column (100 mm × 0.32 mm i.d.) was developed for the separation and simultaneous determination of five common inorganic cations (sodium, ammonium, potassium, magnesium and calcium). Cation exchangers were prepared by the reaction of the hydroxyl group on the surface of diol-group bonded silica gel with 1,3-propanesultone in methanol. Simultaneous separation of these five common inorganic cations were achieved within 17 min using 1 mM methanesulfonic acid and 0.1 mM 15-crown-5 ether in methanol-water (8:2, v/v) as the eluent. The effects of organic solvents and crown ethers in the eluent on the retention of analytes were investigated. The limits of detection (S/N = 3) of the cations were in the range of 18-124 μg/l, the linear correlation coefficients were 0.9991-0.9998, and the RSD values of retention time and peak height were all smaller than 2.1%. The present analytical method was successfully applied to the rapid and direct determination of inorganic cations in samples of river water and commercial drinks, with satisfactory results.     

Intramolecular cyclopropanation of unsaturated terminal epoxides and chlorohydrins

Lithium 2,2,6,6-tetramethylpiperidide (LTMP)-induced intramolecular cyclopropanation of unsaturated terminal epoxides provides an efficient and completely stereoselective entry to bicyclo[3.1.0]hexan-2-ols and bicyclo[4.1.0]heptan-2-ols. Further elaboration of C-5 and C-6 stannyl-substituted bicyclo[3.1.0]hexan-2-ols via Sn-Li exchange/electrophile trapping or Stille coupling generates a range of substituted bicyclic cyclopropanes. An alternative straightforward cyclopropanation protocol using a catalytic amount of 2,2,6,6-tetramethylpiperidine (TMP) allows for a convenient (1 g-7.5 kg) synthesis of bicyclo[3.1.0]hexan-2-ol and other bicyclic adducts. The synthetic utility of this chemistry has been demonstrated in a concise asymmetric synthesis of (+)-beta-cuparenone. The related unsaturated chlorohydrins also undergo intramolecular cyclopropanation via in situ epoxide formation.     

Infrared Spectroscopy of Size-Selected Hydrated Carbon Dioxide Radical Anions CO2.−(H2O)n (n=2–61) in the C−O Stretch Region

Understanding the intrinsic properties of the hydrated carbon dioxide radical anions CO₂^.−(H₂O)_n is relevant for electrochemical carbon dioxide functionalization. CO₂^.−(H₂O)_n (n=2–61) is investigated by using infrared action spectroscopy in the 1150–2220 cm⁻¹ region in an ICR (ion cyclotron resonance) cell cooled to T=80 K. The spectra show an absorption band around 1280 cm⁻¹, which is assigned to the symmetric C−O stretching vibration ν_s. It blueshifts with increasing cluster size, reaching the bulk value, within the experimental linewidth, for n=20. The antisymmetric C−O vibration ν_as is strongly coupled with the water bending mode ν₂, causing a broad feature at approximately 1650 cm⁻¹. For larger clusters, an additional broad and weak band appears above 1900 cm⁻¹ similar to bulk water, which is assigned to a combination band of water bending and libration modes. Quantum chemical calculations provide insight into the interaction of CO₂^.− with the hydrogen-bonding network.     

CO2 Activation and Hydrogenation by PtHn− Cluster Anions

Gas phase reactions between PtH_n^? cluster anions and CO₂ were investigated by mass spectrometry, anion photoelectron spectroscopy, and computations. Two major products, PtCO₂H^? and PtCO₂H₃^?, were observed. The atomic connectivity in PtCO₂H^? can be depicted as HPtCO₂^?, where the platinum atom is bonded to a bent CO₂ moiety on one side and a hydrogen atom on the other. The atomic connectivity of PtCO₂H₃^? can be described as H₂Pt(HCO₂)^?, where the platinum atom is bound to a formate moiety on one side and two hydrogen atoms on the other. Computational studies of the reaction pathway revealed that the hydrogenation of CO₂ by PtH₃^? is highly energetically favorable.