AB initio SCF LCAO MO Calculations on styrene

Minimal basis set ab initio SCF LCAO MO calculations with gaussian-type have been performed for different conformations of the styrene molecule. The computations show the molecule to be planar and the rotational barrier of the vinyl group is estimated to 3.9 kcal/mole.     

Comparability of retention indices of polar substances at elevated temperatures

Summary The non-linear dependency of the retention indices of drugs on temperature is demonstrated hence an indication of the actual working temperature is essential. Fixed temperatures for the determination of retention indices of drugs are proposed. Interlaboratory comparisons of the retention indices of 14 drugs frequently encountered in analytical practice are made for the first time on two stationary phases in three laboratories and on four GC apparatus. The data show that, in comparison with literature values, the interlaboratory deviation is reduced by 1/3 to 1/2 if same temperatures are used. Standardization of the temperature of determination of the retention indices of drugs and unknown substances in biological specimens on OV-1 and OV-17 is proposed.     

Considerations on the planned use of a scientific balance on Mars

The balance is the most widely used complex measuring instrument in science and techniques. To install a balance on Mars is a challenge for numerous aspects of in situ measurements in the next decade. By means of a balance useful parameters could be determined and a variety of investigations could be carried out there. Possible applications of a balance on Mars are reviewed. Choice of type and demands on the balance with regard to the conditions on Mars are discussed. The first step is to test a load cell with strain gauge deflection sensor.     

Morphology and oxygen sensor response of luminescent Ir-labeled poly(dimethylsiloxane)/polystyrene polymer blend films

Polymer films consisting of a linear poly(dimethylsiloxane) end-functionalized with a luminescent Ir(III) complex (Ir-PDMS), blended with polystyrene (PS), function as optical oxygen sensors. The sensor response arises by quenching of the luminescence from the Ir(III) chromophore by oxygen that permeates into the polymer film. The morphology and luminescence oxygen sensor properties of blend films consisting of Ir-PDMS and PS have been characterized by fluorescence microscopy, atomic force microscopy, and scanning electron microscopy. The investigations demonstrate that microscale phase segregation occurs in the films. In blends that contain a relatively small amount of Ir-PDMS in PS (ca. 10 wt %), the Ir-PDMS exists as circular domains, with diameters ranging from 2 to 5 mum, surrounded by the majority PS phase. For larger weight fractions of Ir-PDMS in the blends, the film morphology becomes bicontinuous. A novel epifluorescence microscopy method is applied that allows the construction of Stern-Volmer quenching images that quantify the oxygen sensor response of the blend films with micrometer spatial resolution. These images provide a map of the oxygen permeability of the polymer blend films with a spatial resolution of ca. 1 mum. The results of this investigation show that the micrometer-sized Ir-PMDS domains display a 2-3-fold higher oxygen sensor response compared to the surrounding PS matrix. This result is consistent with the fact that PDMS is considerably more gas permeable compared to PS. The relationship of the microscale morphology of the blends to their performance as macroscale optical oxygen sensors is discussed.     

Behavior and characteristics of biogenic amines, ornithine and lysine derivatized with the o-phthalaldehyde-ethanethiol-fluorenylmethyl chloroformate reagent

The stability and characteristics of the ornithine (Orn), lysine (Lys), putrescine (Put), cadaverine (Cad), 1,7-diaminoheptane (Diah), spermidine (Spd) and spermine (Spm) derivatives obtained with the o-phthalaldehyde (OPA)-ethanethiol (ET)-fluorenylmethyl chloroformate (FMOC) reagent has been investigated. The stoichiometry of the introduced, two-step derivatization process has been followed by photodiode array (DAD) and fluorescence (FL) detections, simultaneously, while the composition of derivatives was confirmed by on-line HPLC-electrospray ionization (ESI) MS measurements. Depending on the composition of the OPA reagents, in addition to the secondary amino group-containing Spd and Spm, under common aqueous conditions also Orn and Lys do react with FMOC resulting in derivatives of various compositions. Applying the OPA-ET reagent of increasing methanol (Met) content (38-80%, v/v) the formation of the FMOC group containing Orn and Lys derivatives could be considerably decreased. Optimum elution condition (18 min, including equilibration) was developed for the simultaneous quantitation of Orn, Lys, Put, Cad, Diah, Spd and Spm, in the presence of the rest of protein amino acids. The practical utility of the method was demonstrated by the analysis of mouse tissues. Average reproducibility of quantitations, characterized with the relative standard deviation percentages of fluorescence intensities and UV responses, in order of listing, proved to be 2.1% and 2.1%, respectively.     

New polycyclic diamine scaffolds from dimerization of 3-alkyl-1,4-dihydropyridines in acidic medium

[reaction: see text] 3-Alkyl-1,4-dihydropyridines dimerize in acidic medium, at low temperature, to give polycyclic imminium salts derivatives that were reduced to afford new polycyclic diamine scaffolds. The reaction can be extended to enantiopure series starting from R-(+)- or S-(-)-1-phenylethylamine. Long exposure of the polycyclic imminium salt intermediates to air moisture at 20 degrees C resulted in formation of new amide derivatives. This is probably due to the addition of water followed by an intramolecular oxido-reduction process.     

Optically and thermally induced electron transfer pathways in hexakis[4-(N,N-diarylamino)phenyl]benzene derivatives

The optically and thermally induced electron transfer pathways of highly symmetrical (D(3)) hexaarylbenzene systems with six triarylamine redox sites have been investigated. Owing to slightly different local redox potentials, the radical trication could be selectively generated by electrochemical methods. This trication shows a strong intervalence charge-transfer band in the near infrared (NIR) that was measured by spectroelectrochemistry and analysed using multi-dimensional Mulliken-Hush theory. Quantum chemical AM1 CI calculations indicate that there is no optically induced concerted three-electron transfer that transforms the ground state into a state in which all three positively charged triarylamine moieties change place with their neutral neighbours. The potential energy surface of the ground state was constructed by using quadratic potentials. From this potential surface it is apparent that there is also no thermally allowed concerted three-electron transfer pathway. Instead, three consecutive one-electron transfer steps are necessary for this process.     

Comparison of different derivatization approaches for mercury speciation in biological tissues by gas chromatography/inductively coupled plasma mass spectrometry

A novel interface design for coupling gas chromatography and inductively coupled plasma mass spectrometry (GC/ICP-MS) was used to perform mercury speciation in biological tissues. Three derivatization approaches were optimized and compared for this purpose: anhydrous butylation using a Grignard reagent, aqueous ethylation by means of NaEt(4)B and aqueous propylation with NaPr(4)B. The last reagent was synthesized in the laboratory as it is not commercially available. Detection limits obtained by GC/ICP-MS ranged between 100 and 200 fg (as absolute mass) for methylmercury and between 500 and 600 fg for inorganic mercury using a 1 microl injection. Quantification of methyl- and inorganic mercury was carried out by resorting to aqueous calibration, using ethylmercury as internal standard for both propylation and butylation derivatization techniques. For ethylation procedures, a methylpropylmercury solution was used as internal standard. The absence of transmethylation during sample preparation was checked using a 97% enriched (202)Hg inorganic standard. The accuracy of the three derivatization approaches was evaluated by the analysis of the certified reference material DOLT-2 (dogfish liver) from the National Research Council of Canada and certified for methylmercury, with satisfactory results.     

High Performance Varistor Discs Obtained from Chemically Synthesized Doped Zinc Oxide Powder

The ceramic microstructure, the chemical homogeneity of specific dopants and the mechanical integrity of a varistor disc are critical parameters in determining the transient voltage suppression features of these devices. The material properties and overall quality of the starting ceramic powders used to produce such components are essential in achieving the desired properties. The present work describes a novel chemical method developed to produce doped zinc oxide powders and an industrial scale manufacturing process for the production of final varistor blocks for surge arrester applications. The results are compared with those obtained when using standard varistor powder made by the mixed oxide route is used. All the fundamental electrical properties of the discs have been determined and correlated with the relevant manufacturing steps.     

Two-photon absorption of dissociating TLI in strong laser fields

In a strong laser field (I=2 GW/cm²) TlI is dissociated by a two-photon process and the Tl fragment is detected state specifically. The yield of Tl 6p ² P _3/2 (Tl*) is measured as a function of the dissociation wavelength (480 nm–540 nm). If the dissociation wavelength is close to two-photon transitions of the Tl atom from 6p ² P _3/2 to np² P _1/2,3/2 or mf² F _5/2,7/2,n=10 ... 15,m=7 ... 12 dips in the yield are observed. These dips show a significant asymmetric broadening, compared to a free atomic transition and the observation is interpreted as an absorption process of the transient state of dissociating TlI during the laser pulse. By applying the Landau-Zener approximation for the potential crossing of dressed molecular states, we are able to describe the broadening and the power density dependence of the observations. Simulations show that the asymmetry is determined by the difference potential of the electronic states which are coupled by the laser field.