Monosaccharides as silicon chelators: pentacoordinate bis(diolato)(phenyl)silicates with the cis-furanose isomers of common pentoses and hexoses

Five-coordinate phenylsilicates are formed from the reaction of trimethoxy(phenyl)silane with monosaccharides in methanol in the presence of a stoichiometric amount of base. Five complexes have been isolated and characterized with two ketoses and three aldopentoses. The silicon central atom in [K([18]crown-6)][PhSi(beta-D-Fruf 2,3H-2)2].MeOH (1, Fru=fructose) is part of two chelate rings, with the ligands being beta-D-fructofuranose-O2,O3 dianions. The beta-furanose isomer is best suited for silicon ligation because it exhibits a torsion angle close to 0 degrees for the most acidic diol function, thus assuring a flat chelate ring. The same structural principles are also found in [K([18]crown-6)][PhSi(beta-D-Araf1,2H-2)2].2 MeOH (2, Ara=arabinose), [K([18]crown-6)][PhSi(alpha-D-Ribf1,2H-2)2] (3, Rib=ribose), [K([18]crown-6)][PhSi(alpha-D-Xylf1,2H-2)2]. acetone (4, Xyl=xylose), and [K([18]crown-6)][PhSi(alpha-D-Rulf2,3H-2)2] (5, Rul=ribulose).     

Differentiation between Shallow and Deep Charge Trap States on Single Poly(3‐hexylthiophene) Chains through Fluorescence Photon Statistics

Blinking of the photoluminescence (PL) emitted from individual conjugated polymer chains is one of the central observations made by single‐molecule spectroscopy (SMS). Important information, for example regarding excitation energy transfer, can be extracted by evaluating dynamic quenching. However, the nature of trap states, which are responsible for PL quenching, often remains obscured. We present a detailed investigation of the photon statistics of single poly(3‐hexylthiophene) (P3HT) chains obtained by SMS. The photon statistics provide a measure of the number and brightness of independently emitting areas on a single chain. These observables can be followed during blinking. A decrease in PL intensity is shown to be correlated with either 1) a decrease in the average brightness of the emitting sites; or 2) a decrease in the number of emitting regions. We attribute these phenomena to the formation of 1) shallow charge traps, which can weakly affect all emitting areas of a single chain at once; and 2) deep traps, which have a strong effect on small regions within the single chains.     

Pre-organization of the core structure of E-selectin antagonists

A new class of N-acetyl-D-glucosamine (GlcNAc) mimics for E-selectin antagonists was designed and synthesized. The mimic consists of a cyclohexane ring substituted with alkyl substituents adjacent to the linking position of the fucose moiety. Incorporation into E-selectin antagonists led to the test compounds 8 and the 2'-benzoylated analogues 21, which exhibit affinities in the low micromolar range. By using saturation transfer difference (STD)-NMR it could be shown that the increase in affinity does not result from an additional hydrophobic contact of the alkyl substituent with the target protein E-selectin, but rather from a steric effect stabilizing the antagonist in its bioactive conformation. The loss of affinity found for antagonists 10 and 35 containing a methyl substituent in a remote position (and therefore unable to support to the stabilization of the core) further supports this hypothesis. Finally, when a GlcNAc mimetic containing two methyl substituents (52 and 53) was used, in which one methyl was positioned adjacent to the fucose linking position and the other was in a remote position, the affinity was regained.     

Acid-induced degradation of phosphorescent dopants for OLEDs and its application to the synthesis of tris-heteroleptic iridium(III) bis-cyclometalated complexes

Investigations of blue phosphorescent organic light emitting diodes (OLEDs) based on [Ir(2-(2,4-difluorophenyl)pyridine)(2)(picolinate)] (FIrPic) have pointed to the cleavage of the picolinate as a possible reason for device instability. We reproduced the loss of picolinate and acetylacetonate ancillary ligands in solution by the addition of Br?nsted or Lewis acids. When hydrochloric acid is added to a solution of a [Ir(C^N)(2)(X^O)] complex (C^N = 2-phenylpyridine (ppy) or 2-(2,4-difluorophenyl)pyridine (diFppy) and X^O = picolinate (pic) or acetylacetonate (acac)), the cleavage of the ancillary ligand results in the direct formation of the chloro-bridged iridium(III) dimer [{Ir(C^N)(2)(μ-Cl)}(2)]. When triflic acid or boron trifluoride are used, a source of chloride (here tetrabutylammonium chloride) is added to obtain the same chloro-bridged iridium(III) dimer. Then, we advantageously used this degradation reaction for the efficient synthesis of tris-heteroleptic cyclometalated iridium(III) complexes [Ir(C^N(1))(C^N(2))(L)], a family of cyclometalated complexes otherwise challenging to prepare. We used an iridium(I) complex, [{Ir(COD)(μ-Cl)}(2)], and a stoichiometric amount of two different C^N ligands (C^N(1) = ppy; C^N(2) = diFppy) as starting materials for the swift preparation of the chloro-bridged iridium(III) dimers. After reacting the mixture with acetylacetonate and subsequent purification, the tris-heteroleptic complex [Ir(ppy)(diFppy)(acac)] could be isolated with good yield from the crude containing as well the bis-heteroleptic complexes [Ir(ppy)(2)(acac)] and [Ir(diFppy)(2)(acac)]. Reaction of the tris-heteroleptic acac complex with hydrochloric acid gives pure heteroleptic chloro-bridged iridium dimer [{Ir(ppy)(diFppy)(μ-Cl)}(2)], which can be used as starting material for the preparation of a new tris-heteroleptic iridium(III) complex based on these two C^N ligands. Finally, we use DFT/LR-TDDFT to rationalize the impact of the two different C^N ligands on the observed photophysical and electrochemical properties.     

Foam films in the presence of functionalized gold nanoparticles

Dry aqueous foams made of anionic surfactant (SDS) and spherical gold nanoparticles are studied by small angle X-ray scattering and by optical techniques. To obtain stable foams, the surfactant concentration is well above the critical micelle concentration. The specular reflectivity signal obtained on a very thin film (thickness 20 nm) shows that functionalized nanoparticles (17 nm typical size) are trapped within the film in the form of a single monolayer. In order to isolate the film behavior, investigations are made on a single film confined in a tube. The film thinning according to the ratio of functionalized nanoparticle and SDS micelles (1:1, 1:10, 1:100) is mainly governed by the structural arrangement of SDS micelles. In thick films, nanoparticles tend to form aggregates that disappear during drainage. In particular self-organization of nanoparticles (with different surface charge) inside the film is not detected.     

Chemical Consequences of the Mechanical Bond: A Tandem Active Template‐Rearrangement Reaction

We report the unexpected discovery of a tandem active template CuAAC‐rearrangement process, in which N₂ is extruded on the way to the 1,2,3‐triazole product to give instead acrylamide rotaxanes. Mechanistic investigations suggest this process is dictated by the mechanical bond, which stabilizes the Cu^I‐triazolide intermediate of the CuAAC reaction and diverts it down the rearrangement pathway; when no mechanical bond is formed, the CuAAC product is isolated.     

Application of high-performance liquid chromatography diode array detection and mass spectrometry to the analysis of characteristic compounds in various essential oils

A high-performance liquid chromatography (HPLC) method was established using an analytical reversed-phase column and gradient elution to achieve chromatographic separation of typical compounds in essential oils. For detection, a diode array detector monitoring different wavelengths simultaneously as well as a mass spectrometer (MS) were used. Atmospheric pressure chemical ionization operating in the positive mode turned out to be a suitable tool to detect volatiles of different chemical classes and to identify them in essential oil matrices. Characteristic fingerprints of eucalyptus, lavender, may chang, pine, rosemary, thyme, and turpentine essential oils monitored at a representative wavelength (220 nm) demonstrated the suitability of HPLC in essential oil analysis. Additional monitoring wavelengths (210, 250, and 280 nm) provided useful information about the identity of the specific component and opened the possibility to differentiate presumably coeluting compounds by means of their distinct absorption behavior. Finally, peak assignment in seven essential oils was performed on the basis of characteristic retention times and UV and MS data of a broad set of reference volatiles.     

Formation of unexpected ions from a first‐generation polyamidoamine dendrimer by use of methanol: an artefact due to electrospray emitter corrosion?

We report the formation of unexpected ions during the analyses of a first‐generation polyamidoamine dendrimer in negative ion mode using an ion trap equipped with an electrospray ionisation source. These surprising ions corresponded to an increase of 12 m/z units over those expected. The formation of the unexpected ions was dependent on the tuning of the solution flow rate and the capillary high voltage. In addition, measurements of unusual value of the current suggested that a reaction was occurring in the corona plasma. The influence of methanol in this phenomenon was demonstrated by using CD₃OH in the sample preparation. We propose two structures to explain the observed adduct based on the results of MS² experiments and by referring to previous work dealing with 12 m/z units addition. We showed that a corona discharge caused by alterations taking place to the electrospray capillary emitter was the origin of these unexpected ions. Finally, we discuss the mechanism involved in the formation of the ions and we propose means to control such artefacts. Copyright © 2010 John Wiley & Sons, Ltd.