Detailed experimental and kinetic modeling study of 3-carene pyrolysis

3-Carene is an important potential biofuel with properties similar to the jet-propellant JP-10. Its thermal decomposition and combustion behavior is to date unknown, which is essential to assess its quality as a fuel. A combined experimental and kinetic modeling study has been conducted to understand the initial decomposition of 3-carene. The pyrolysis of 3-carene was investigated in a jet-stirred quartz reactor at atmospheric pressure, at temperatures varying from 650 to 1050 K, covering the complete conversion range. The decomposition of 3-carene was observed to start around 800 K, and it is almost complete at 970 K. Online gas chromatography shows that primarily aromatics are generated which suggests that 3-carene is not a good fuel candidate. The potential energy surface for the initial decomposition pathways determined by KinBot shows that a hydrogen elimination reaction dominates, giving primarily cara-2,4-diene. Next to this molecular pathway, radical pathways lead to aromatics via ring opening. The kinetic model was automatically generated with Genesys and consists of 2565 species and 9331 reactions. New quantum chemical calculations at the CBS-QB3 level of theory were needed to calculate rate coefficients and thermodynamic properties relevant for the primary decomposition of 3-carene. Both the conversion of 3-carene and the yields of the primary products (ie, benzene and hydrogen gas) are well predicted with this kinetic model. Rate of production analyses shows that the dominant pathways to convert 3-carene are hydrogen elimination reaction and radical chemistry.     

QUANTIS: Data quality assessment tool by clustering analysis

Automatically generated kinetic networks are ideally validated against a large set of accurate, reproducible, and easy-to-model experimental data. However, although this might seem simple, it proves to be quite challenging. QUANTIS, a publicly available Python package, is specifically developed to evaluate both the precision and accuracy of experimental data and to ensure a uniform, quick processing, and storage strategy that enables automated comparison of developed kinetic models. The precision is investigated with two clustering techniques, PCA and t-SNE, whereas the accuracy is probed with checks for the conservation laws. First, the developed tool processes, evaluates, and stores experimental yield data automatically. All data belonging to a given experiment, both unprocessed and processed, are stored in the form of an HDF5 container. The demonstration of QUANTIS on three different pyrolysis cases showed that it can help in identifying and overcoming instabilities in experimental datasets, reduce mass and molar balance closure discrepancies, and, by evaluating the visualized correlation matrices, increase understanding in the underlying reaction pathways. Inclusion of all experimental data in the HDF5 file makes it possible to automate simulating the experiment with CHEMKIN. Because of the employed InChI string identifiers for molecules, it is possible to automate the comparison experiment/simulation. QUANTIS and the concepts demonstrated therein is a potentially useful tool for data quality assessment, kinetic model validation, and refinement.     

Efficient and Convenient Method for the Synthesis of N‐Arylhydrazones using a Palladium‐Catalyzed Bond‐Forming Reaction

A highly effective, convenient, and reproducible industrial process for palladium‐catalyzed carbon–nitrogen cross coupling has been developed and applied on a large scale. Thus various functionalized N‐arylhydrazones have been easily prepared and well characterized by conventional spectroscopic methods.     

Miniaturised enzymatic conductometric biosensor with Nafion membrane for the direct determination of formaldehyde in water samples

A new conductometric enzyme-based biosensor was developed for the determination of formaldehyde (FA) in aqueous solutions. The biosensor was prepared by cross-linking formaldehyde dehydrogenase from Pseudomonas putida with bovine serum albumin in saturated glutaraldehyde vapours (GA) at the surface of interdigitated gold microelectrodes. Nicotinamide adenine dinucleotide cofactor (NAD⁺) was added in solution at each measurement to maintain enzyme activity. Addition of a Nafion layer over the enzyme modified electrode resulted in a significant increase of biosensor signal due to enhanced accumulation of protons generated by enzymatic reaction at the electrode surface. Different parameters affecting enzyme activity or playing a role in ionic transfer through the Nafion membrane were optimised. In optimal conditions (0.045 mg enzyme, 30 min exposure to GA, 0.3 μL of a 1 % (v/v) Nafion solution deposit, measurement in 5 mM phosphate buffer pH 7 containing 20 μM NAD⁺), the biosensor signal was linear up to 10 mM FA, and the detection limit was 18 μM. Relative standard deviations calculated from five consecutive replicates of FA solutions were lower than 5 % in the 1–10 mM range. The biosensor was successfully applied to the determination of FA in spiked water samples (tap water and Rhone river water), with recoveries in the 95–110 % range.

Screening of Wood/Forest and Vine By-Products as Sources of New Drugs for Sustainable Strategies to Control Fusarium graminearum and the Production of Mycotoxins

Fusarium graminearum is a fungal pathogen that can colonize small-grain cereals and maize and secrete type B trichothecene (TCTB) mycotoxins. The development of environmental-friendly strategies guaranteeing the safety of food and feed is a key challenge facing agriculture today. One of these strategies lies on the promising capacity of products issued from natural sources to counteract crop pests. In this work, the in vitro efficiency of sixteen extracts obtained from eight natural sources using subcritical water extraction at two temperatures was assessed against fungal growth and TCTB production by F. graminearum. Maritime pine sawdust extract was shown to be extremely efficient, leading to a significant inhibition of up to 89% of the fungal growth and up to 65% reduction of the mycotoxin production by F. graminearum. Liquid chromatography/mass spectrometry analysis of this active extract revealed the presence of three families of phenolics with a predominance of methylated compounds and suggested that the abundance of methylated structures, and therefore of hydrophobic compounds, could be a primary factor underpinning the activity of the maritime pine sawdust extract. Altogether, our data support that wood/forest by-products could be promising sources of bioactive compounds for controlling F. graminearum and its production of mycotoxins.     

Acetylene-terminated resins: Mechanism of thermal polymerization and properties of cured polymers

The polymerization kinetics and mechanisms of model compounds (mono- and difunctional) characteristic of prepolymers of ATR (acetylene-terminated resins) have been studied by HPLC, FTIR, UV, NMR (liquid and solid) and HPLC in the temperature range of 150–220°C. Using monofunctional compounds, we were able to show that the thermal polymerization of acetylene functions is not a simple reaction. Initially, the majority of compounds formed have a low polymerization degree, followed by the formation of species with higher and progressive polymerization degrees. Spectroscopic techniques such as NMR and FTIR lead to the unambiguous determination of reaction conversion up to 95% in the case of bifunctional prepolymers. The understanding of network structures, on the other hand, is more delicate in polyaromatic systems, since the chains formed are very similar to the basic skeleton of the prepolymer. The kinetic curves obtained isothermally between 150–220°C have shown that while kinetic monitoring of the disappearance of the first 90% of ethynyl functions poses no particular problems, there is a considerable uncertainty for the last 10%, regardless of the technique chosen. We have demonstrated that me thermal properties are dependent on the molecular weight and the structure of the polymer.     

Pyridylmagnesiates: generation by bromine–metal exchange and enantioselective addition to aldehydes

Butyl and dibutylmagnesiates incorporating chiral ligands have been prepared and their reactivity studied. The reagents were efficient to promote the clean bromine–magnesium exchange of azinyl bromides at room temperature and subsequent reaction with aldehydes affording pyridylcarbinols. (R,R)-TADDOL-based dibutylmagnesiate was the best reagent leading to acceptable to good enantioselectivities, depending on the substrate and on the aldehyde substitution. This is the first example of enantioselective addition of in situ generated pyridylmagnesiate to carbonyl electrophiles.     

Straightforward Conversion of Alcohols into Nitriles

The reaction of various alcohols with cyanogen bromide, triphenylphosphine, and a base afforded the corresponding nitrile in satisfactory yields.