Hexyl triazabutadiene as a potent alkylating agent

Alkyl diazonium ions are among the most reactive alkylating agents in the synthetic chemists’ arsenal. That said, there are precious few methods by which one can selectively and safely utilize this chemistry. Herein, we show the use of a bench stable hexyl triazabutadiene as a source of reactive diazonium ions that undergo substitution chemistry with weak nucleophiles, such as carboxylates and even sulfonates. In the absence of a nucleophile, elimination was observed to occur. To overcome issues stemming from side-product inhibition of the reaction, we show that the triazabutadiene can be pre-activated with tosyl isocyanate.     

二苯并噻吩在分散型钼催化剂和原位产生的氢存在下的加氢脱硫 Ⅳ.集总动力学

研究了水/甲苯乳化液中二苯并噻吩(硫芴)在分散型钼酸、磷钼酸和四硫代钼酸铵催化剂存在下的加氢脱硫反应.反应在高压釜中于340℃及三种不同的气氛即H2,H2/H2O和CO/H2O(CO和H2O经水煤气转换反应(WGSR)产生原位氢)的存在下进行.用GC和GC-MS鉴定、分析了气体和液体产物的组成.在此基础上,提出了包含直接氢解和加氢脱硫两个反应途径的硫芴加氢反应网络,并采用最优化法计算了反应网络的速率常数.结果表明:对所研究的9个反应体系,反应网络的模型预测值与试验值十分吻合;加氢路径比氢解路径至少快1倍,硫芴的加氢比联苯的加氢快1倍,部分加氢的中间产物1,2,3,4-四氢硫芴和1,2,3,4,10,11-六氢硫芴的氢解比硫芴直接氢解快10倍以上;对硫芴的加氢脱硫反应,在分散型钼存在下,原位产生的氢比加入的氢气更为有效.     

NIRS and Aquaphotomics Trace Robusta-to-Arabica Ratio in Liquid Coffee Blends

Coffee is both a vastly consumed beverage and a chemically complex matrix. For a long time, an arduous chemical analysis was necessary to resolve coffee authentication issues. Despite their demonstrated efficacy, such techniques tend to rely on reference methods or resort to elaborate extraction steps. Near infrared spectroscopy (NIRS) and the aquaphotomics approach, on the other hand, reportedly offer a rapid, reliable, and holistic compositional overview of varying analytes but with little focus on low concentration mixtures of Robusta-to-Arabica coffee. Our study aimed for a comparative assessment of ground coffee adulteration using NIRS and liquid coffee adulteration using the aquaphotomics approach. The aim was to demonstrate the potential of monitoring ground and liquid coffee quality as they are commercially the most available coffee forms. Chemometrics spectra analysis proved capable of distinguishing between the studied samples and efficiently estimating the added Robusta concentrations. An accuracy of 100% was obtained for the varietal discrimination of pure Arabica and Robusta, both in ground and liquid form. Robusta-to-Arabica ratio was predicted with R²CV values of 0.99 and 0.9 in ground and liquid form respectively. Aquagrams results accentuated the peculiarities of the two coffee varieties and their respective blends by designating different water conformations depending on the coffee variety and assigning a particular water absorption spectral pattern (WASP) depending on the blending ratio. Marked spectral features attributed to high hydrogen bonded water characterized Arabica-rich coffee, while those with the higher Robusta content showed an abundance of free water structures. Collectively, the obtained results ascertain the adequacy of NIRS and aquaphotomics as promising alternative tools for the authentication of liquid coffee that can correlate the water-related fingerprint to the Robusta-to-Arabica ratio.     

Production of low sulfur diesel fuel via adsorption: an equilibrium and kinetic study on the adsorption of dibenzothiophene onto NaY zeolite

The adsorption of dibenzothiophene (DBT) in hexadecane onto NaY zeolite has been studied by performing equilibrium and kinetic adsorption experiments. The influence of several variables such as contact time, initial concentration of DBT and temperature on the adsorption has been investigated. The results show that the isothermal equilibrium can be represented by the Langmuir equation. The maximum adsorption capacity at different temperatures and the corresponding Langmuir constant (K _L ) have been deduced. The thermodynamic parameters (ΔG ⁰,ΔH ⁰,ΔS ⁰) for the adsorption of DBT have also been calculated from the temperature dependence of K _L using the van’t Hoff equation. The value of ΔH ⁰,ΔS ⁰ are found to be −30.3 kJ mol⁻¹ and −33.2 J mol⁻¹ K⁻¹ respectively. The adsorption is spontaneous and exothermic. The kinetics for the adsorption process can be described by either the Langmuir model or a pseudo-second-order model. It is found that the adsorption capacity and the initial rate of adsorption are dependent on contact time, temperature and the initial DBT concentration. The low apparent activation energy (12.4 kJ mol⁻¹) indicates that adsorption has a low potential barrier suggesting a mass transfer controlled process. In addition, the competitive adsorption between DBT, naphthalene and quinoline on NaY was also investigated.     

CO adsorption on gold clusters stabilized on ceria-titania mixed oxides: comparison with reference catalysts

Fourier transform infrared spectra of CO adsorption from 120 K up to room temperature on two gold catalysts supported on different mixed ceria-titania oxides are discussed in comparison with those obtained on Au/TiO(2) and Au/Fe(2)O(3) reference catalysts provided by the World Gold Council. The spectra of adsorbed CO, run on the different samples before preliminary treatment, are shown and compared with those of the untreated catalysts and of the samples reduced either in CO or in hydrogen. Big differences have been found between the ceria-titania supported samples and the reference ones: unusual absorption bands, irreversible to outgassing, have been detected after CO interaction on the untreated and oxidized ceria containing samples. These absorptions are assigned to CO on Au(n)(+) small clusters stabilized at the ceria defects. By reduction in hydrogen, negatively charged Au(n)(-) species are produced on the same sample. Oxidized small particles are present on the reference catalysts, but only on the untreated samples; after treatment, only metallic step sites are evident.     

Quenching Action of Monofunctional Sulfur Mustard on Chlorophyll Fluorescence: Towards an Ultrasensitive Biosensor

An ultrasensitive fluorimetric biosensor for the detection of chemical warfare agent sulfur mustard (SM) was developed using its monofunctional analogue. SM is a vesicant and a potent chemical threat owing to its direct toxic effects on eyes, lungs, skin and DNA. This work investigates the quenching action of the analyte on chlorophyll fluorescence as elucidated by nuclear magnetic resonance, Fourier transform infrared spectroscopy and mass spectrometry studies suggesting the electrophilic attack of carbonium ion on nitrogens of the porphyrin moiety of chlorophyll. The properties of immobilisation matrix were optimised and scanning electron microscope observations confirmed improvement in pore size of sol–gels by addition of 32 % (v/v) glycerol, a feature enabling enhanced sensitivity towards the analyte. Chlorophyll embedded sol–gel was treated with increasing concentrations of monofunctional SM and the corresponding drop in maximum fluorescence intensity as measured by emission at 673 nm was observed, which varied linearly and had a detection limit of 7.68?×?10^?16 M. The biosensor was found to be 6 orders of magnitude more sensitive than the glass microfibre-based disc biosensor previously reported by us.     

Mercury determination in sediments by CVAAS after on line preconcentration by solid phase extraction with a sol-gel sorbent containing CYANEX 471X®

The development of a preconcentration method for the measurement of trace levels of mercury in digested sediments is described. Solid phase extraction (SPE) was used for the preconcentration of mercury coupled on-line by means of a flow injection (FI) system followed by cold vapour atomic absorption spectrometry (CVAAS) detection. The SPE was carried out through a column packed with a sorbent material containing triisobutylphosphine sulfide (CYANEX 471X®) as mercury extractant and prepared by the sol-gel process. The effects of FI variables (argon, eluent, and reductant flow rates, loading and elution times) as well as the eluent concentration on the analytical performance of the method were evaluated. The proposed method was validated under the optimum conditions. The calibration graph was linear from 0.05?µg?L^?1 to 3.0 µg?L^?1 of Hg. The detection limit (DL), based on three times the standard deviation of the blank measurement criterion, was 24?ng^?L^?1. The repeatability was 1.5% and 1.8% RSD (n?=?10) at concentrations of 0.5 and 1 µg?L^?1 of Hg, respectively. Method enrichment factors of 16 with a productivity of 30 samples h^?1 or 32 with a productivity of 17 samples h^?1 were achieved under selected conditions. Certified reference materials, inductively coupled plasma mass spectroscopy (ICP-MS) and cold vapour atomic fluorescence spectrometry (CVAFS), were used to evaluate the accuracy of the proposed method.     

Synthesis of triarylphosphines having para -SH and -SMe groups: Preparation of their complexes and formation of a monolayer on a gold surface

The phosphines P(C₆H₄-4-SR)₃ (R = H, Me, 2-C₅H₉O) and (C₆H₄-4-SR)₂PCH₂CH₂P(C₆H₄-4-SR)₂ (R = H, Me) have been synthesized. The phosphines with -SMe groups can be prepared by reaction of 4-BrC₆H₄SMe with either BuLi or magnesium (to generate the corresponding Grignard compound) followed by reaction with PCl₃ or Cl₂PCH₂CH₂PCl₂, respectively. The methyl group can be eliminated by reaction with sodium in liquid NH₃. Other methods of protection/deprotection of the thiol group failed to afford the desired compounds. Reaction of 4-BrC₆H₄SH with dihydropyrane afforded the protected thiol 4-BrC₆H₄S-2-C₅H₉O from which the corresponding phosphine was successfully synthesized. However, attempts to remove the tetrahydropyranyl group by reaction with AgNO₃-HCl, gave an insoluble polymer as product. Reaction of P(C₆H₄SR)₃ (R = H, Me) with Ni(CO)₄ affords the corresponding mono phosphine complex quantitatively. The complex with the unprotected thiol group can be absorbed on a gold surface and the corresponding ν_CO bands were detected by grazing angle Fourier transform infrared reflection absorption spectroscopy (grazing angle FTIR-RAS). Reaction of Rh(acac)(CO)₂ with P(C₆H₄SR)₃ (R = Me) affords the complex Rh(acac)(CO)(P(C₆H₄SR)₃) (R = Me), but if R = H a polymer insoluble in any solvent was obtained. The same occurs in the case of PtCl₂(CO)(DMSO). Apparently, once P(C₆H₄SH)₃ is coordinated to a metal not in the zero oxidation state, oxidation of the thiol group to disulphide becomes very easy even in a dinitrogen atmosphere.     

Copper coordination polymers from cavitand ligands: hierarchical spaces from cage and capsule motifs,and other topologies

The cyclotriveratrylene-type ligands (±)-tris(iso-nicotinoyl)cyclotriguaiacylene L1 (±)-tris(4-pyridylmethyl)cyclotriguaiacylene L2 and (±)-tris{4-(4-pyridyl)benzyl}cyclotriguaiacylene L3 all feature 4-pyridyl donor groups and all form coordination polymers with Cu^I and/or Cu^II cations that show a remarkable range of framework topologies and structures. Complex [Cu^I ₄Cu^II _1.5(L1)₃(CN)₆]·CN·n(DMF) 1 features a novel 3,4-connected framework of cyano-linked hexagonal metallo-cages. In complexes [Cu₃(L2)₄(H₂O)₃]·6(OTf)·n(DMSO) 2 and [Cu₂(L3)₂Br₂(H₂O)(DMSO)]·2Br·n(DMSO) 3 capsule-like metallo-cryptophane motifs are formed which linked through their metal vertices into a hexagonal 2D network of (4³.12³)(4².12²) topology or a coordination chain. Complex [Cu₂(L1)₂(OTf)₂(NMP)₂(H₂O)₂]·2(OTf)·2NMP 4 has an interpenetrating 2D 3,4-connected framework of (4.6².8)(6².8)(4.6².8²) topology with tubular channels. Complex [Cu(L1)(NCMe)]·BF₄·2(CH₃CN)·H₂O 5 features a 2D network of 6³ topology while the Cu^II analogue [Cu₂(L1)₂(NMP)(H₂O)]·4BF₄·12NMP·1.5H₂O 6 has an interpenetrating (10,3)-b type structure and complex [Cu₂(L2)₂Br₃(DMSO)]·Br·n(DMSO) 7 has a 2D network of 4.8² topology. Strategies for formation of coordination polymers with hierarchical spaces emerge in this work and complex 2 is shown to absorb fullerene-C₆₀ through soaking the crystals in a toluene solution.     

Water‐Soluble Triazabutadienes that Release Diazonium Species upon Protonation under Physiologically Relevant Conditions

Triazabutadienes are an understudied structural motif that have remarkable reactivity once rendered water‐soluble. It is shown that these molecules readily release diazonium species in a pH‐dependent manner in a series of buffer solutions with pH ranges similar to those found in cells. Upon further development, we expect that this process will be well suited to cargo‐release strategies and organelle‐specific bioconjugation reactions. These compounds offer one of the mildest ways of generating diazonium species in aqueous solutions.