Semiconductor waveguide directional couplers for coherent receivers

Optical waveguide 3-dB couplers integrated on semicondutors have been studied, designed and fabricated, using both bulk and diluted multi-quantum-well InGaAsP/InP-based materials, grown by MOCVD. The device structure is based on the two-mode interference (TMI) principle and is fully compatible for integration with the optoelectronic and electronic components of a coherent receiver. Bulk material couplers provide an output balanced within 0.05 dB per nanometer and an excess loss of 1.4 dB, compared to a straight guide, while coupling loss to a tapered-lensed single mode fibre is 4 dB.Improved coupling efficiency to single-mode fibres is achieved by use of moderately diluted multi-quantum-well waveguides, which include InGaAsP wells and InP barriers: coupling loss to a tapered-lensed single-mode fibre as low as 0.5 dB and excess loss of 1.8 dB are featured. Couplers fabricated with this waveguide structure have a balance sensitivity of 0.03 to 0.04 dB per nanometer.A moderately diluted multi-quantum-well 3-dB coupler has been permanently pigtailed and butt-coupled to a dual balanced PIN photoreceiver. This hybrid assembly was tested in a coherent transmission system at 155 and 622 Mbits^-1 showing sensitivities, for 10^-9 BER, of about-38.0 dBm and-28.8 dBm, respectively.     

Influence of heat treatment conditions on the porosity changes of sulfonated styrene/divinylbenzene copolymers

Sulfonic cation exchangers with two ion exchange group concentrations (0.5 and 2.4 mmol/g, samples A and B, respectively) were obtained by sulfonation of a porous styrene (S) and divinylbenzene (DVB) copolymer with chlorosulfonic acid. Strong thermal decomposition of the sulfonated copolymer A, accompanied by significant changes in its porous structure, starts at ca. 400°C. The char has no sulfonic groups. After heat treatment at 400°C in steam, a sorbent was obtained (yield 65%) that shows higher phenol sorption than the untreated sample when related to the bed volume. The chlorosulfonic derivatives of the initial copolymer were less thermally resistant than the sulfonic ones obtained by hydrolysis. Pyrolysis of the cation exchanger B, in its H+ and Ca²⁺ forms, was carried out at 900°C (yield of both chars close to 30%). By subsequent steam activation at 800°C to a 50% burn-off of the char, sorbents with well-developed, but distinctly different, porous structures were obtained. The activated char from the sulfonated copolymer in its hydrogen form was highly microporous and indicated an effective surface area of 1180 m²/g. However, because of a low contribution of mesopores, its ability to adsorb phenol from the liquid phase was not very high. The activated char from the calcium-doped copolymer, indicating a smaller surface area (580 m²/g) but characterized by a well-developed mesoporosity, was a better sorbent for phenol. © 1994 John Wiley & Sons, Inc.     

Identification of metabolites of halofantrine, a new candidate anti-malarial drug, by gas chromatography-mass spectrometry.

Two previously unknown metabolites of halofantrine, a candidate anti-malarial drug, have been isolated by thin-layer chromatography from the plasma of dogs administered a single oral dose of 60 mg/kg. Their identifies were investigated after trimethylsilylation by gas chromatography-mass spectrometry under electron-impact and negative-ion chemical ionization conditions. The structural assignment was further confirmed by using a combination of elemental composition analysis of all the isotope peaks at low mass resolution and isotope pattern matching. These two metabolites were formed by modification of the dibutylaminopropyl side-chain of the parent compound involving deamination and oxidation or reduction.     

Time-resolved EPR studies on magnetic interactions between excited triplet (tetraphenylporphinato) zinc and doublet nitroxide radical

By time-resolved electron paramagnetic resonance (TREPR), four (tetraphenylporphinato) zinc (ZnTPP) complexes coordinated by an axial ligand containing a nitroxide radical (NRX; X=4, 5, 8, and 10, denotes the bond number from zinc to nitroxide nitrogen) have been studied in terms of magnetic interactions between the photoexcited triplet state of ZnTPP and NRX. The TREPR spectrum of ZnTPP coordinated by NR10 is almost the same as the one of ZnTPP coordinated by pyridine, indicating that the electron exchange interaction,J, between ZnTPP and the doublet nitroxide is negligibly small. On the other hand, TREPR spectra of the NR4 and NR5 complexes are assigned to the Q₁ state constituted by the ZnTPP and the nitroxide radical. In the case of the ZnTPP-NR8 complex, both T₁ and Q₁ TREPR signals are seen, which may originate from two conformations or degenerate T₁ states of ZnTPP. This EPR study is useful for understanding the photophysical and photochemical properties of chromophores.     

Flame Temperature Effect on the Structure of SiC Nanoparticles Grown by Laser Pyrolysis

Small SiC nanoparticles (10 nm diameter) have been grown in a flow reactor by CO₂ laser pyrolysis from a C₂H₂ and SiH₄ mixture. The laser radiation is strongly absorbed by SiH₄ vibration. The energy is transferred to the reactive medium and leads to the dissociation of molecules and the subsequent growth of the nanoparticles. The reaction happens with a flame. The purpose of the experiments reported in this paper is to limit the size of the growing particles to the nanometric scale for which specific properties are expected to appear. Therefore the effects of experimental parameters on the structure and chemical composition of nanoparticles have been investigated. For a given reactive mixture and gas velocity, the flame temperature is governed by the laser power. In this study, the temperature was varied from 875°C to 1100°C. The chemical analysis of the products indicate that their composition is a function of the temperature. For the same C/Si atomic ratio in the gaseous phase, the C/Si ratio in the powder increases from 0.7 at 875°C up to 1.02 at 1100°C, indicating a growth mechanism limited by C₂H₂ dissociation. As expected, X-ray diffraction has shown an improved crystallisation with increasing temperature. Transmission electron microscopy observations have revealed the formation of 10 nm grains for all values of laser power (or flame temperature). These grains appear amorphous at low temperature, whereas they contain an increasing number of nanocrystals (2 nm diameter) when the temperature increases. These results pave the way to a better control of the structure and chemical composition of laser synthesised SiC nanoparticles in the 10 nm range.     

Determination of colloidally-associated polycyclic aromatic hydrocarbons (PAHs) in fresh water using C18 solid phase extraction disks

A new application of reversed-phase octadecyl (C₁₈) solid phase extraction disks has been developed to separate the colloidally-associated polycyclic aromatic hydrocarbons (PAHs) from those that were truly dissolved in the samples of fresh water. A correction for the retention of small amounts of colloidal material on the C₁₈ disks was required, which would have otherwise lead to minor underestimates in the degree of partitioning between the two phases. Using the humic substance Aldrich Humic Acid (AHA) as a model colloid and the 16 PAHs on the US Enrivonmental Protection Agency priority pollutant list, the partitioning coefficients of the PAHs between the colloidal and truly dissolved phases were shown to be proportional to the hydrophobicity of the PAHs, as measured by their octanol water partition coefficients (K_ow). The values for the partition coefficients obtained (cK_doc′) were similar to those previously reported in the literature using alternative methods, confirming that the technique was producing acceptable results. The technique allows the in situ partitioning of PAHs between the truly dissolved and colloidal phases in fresh water bodies to be determined. It will provide an invaluable cross-check of the laboratory-based methods which often require substantial manipulation of the sample and potentially alter the partitioning between the phases.     

Mechanism of Interaction of γ-Halogenated Salts of Pyrylium and Benzopyrylium with Aromatic Amines

Stoichiometry and kinetics of reactions of 2,6-diphenyl-4-chloropyrylium, 4-chloroflavylium, 4-bromoflavylium, and 4-iodoflavylium perchlorates with nucleophiles N,N-dimethylaniline and n-phenylenediamine are studied using cyclic voltammetry and spectroscopy. Nucleophilic substitution in these compounds proceeds via the formation of a charge-transfer complex, which converts into a radical ion pair as a result of the electron transfer. Heterolytic clevage of the C–Hal bond occurs at the stage of pyranyl (flavanyl) radical.