Dissolved oxygen amperometric sensor based on layer-by-layer assembly using host-guest supramolecular interactions

The development of a simple, efficient and sensitive sensor for dissolved oxygen is proposed using the host-guest binding of a supramolecular complex at a host surface by combining a self-assembled monolayer (SAM) of mono-(6-deoxy-6-mercapto)-β-cyclodextrin (βCDSH), iron (III) tetra-(N-methyl-4-pyridyl)-porphyrin (FeTMPyP) and cyclodextrin-functionalized gold nanoparticles (CDAuNP). The supramolecular modified electrode showed excellent catalytic activity for oxygen reduction. The reduction potential of oxygen was shifted about 200 mV toward less negative values with this modified electrode, presenting a peak current much higher than those observed on a bare gold electrode. Cyclic voltammetry and rotating disk electrode (RDE) experiments indicated that the oxygen reduction reaction involves probably 4-electrons with a rate constant (k_obs) of 7 × 10⁴ mol⁻¹ L s⁻¹. A linear response range from 0.2 up to 6.5 mg L⁻¹, with a sensitivity of 5.5 μA L mg⁻¹ (or 77.5 μA cm⁻² L mg⁻¹) and a detection limit of 0.02 mg L⁻¹ was obtained with this sensor. The repeatability of the proposed sensor, evaluated in terms of relative standard deviation was 3.0% for 10 measurements of a solution of 6.5 mg L⁻¹ oxygen.     

Thermal desorption/gas chromatography/mass spectrometry approach for characterization of the volatile fraction from amber specimens: A possibility of tracking geological origins

Research on the chemical composition of fossil resins has evolved during the last decades as a multidisciplinary field and is strongly oriented toward the correlation with their geological and botanical origin. Various extraction procedures and chromatographic techniques have been used together for identifying the volatile compounds contained in the fossil resin matrix. Hyphenation between thermal desorption (TD), gas chromatography (GC) and mass spectrometry detection (MS) has been chosen to investigate the volatile compounds fraction from ambers with a focus on Romanite (Romanian amber) and Baltic amber species. A data analysis procedure was developed for the main purpose of fingerprinting ambers based on the MS identity of the peaks generated by the volatile fraction, together with their relative percentual area within the chromatogram. Chromatographic data analysis was based entirely on Automated Mass Spectral Deconvolution & Identification System (AMDIS) software to produce deconvoluted mass spectra which were used to build-up a mixed mass spectra and relative retention scale library. Multivariate data analysis was further applied on AMDIS results with successful discrimination between Romanite and Baltic ambers. A special trial was conducted to generate pyrolysis “like” macromolecular structure breakdown to volatile compounds by gamma irradiation with a high absorbed dose of 500 kGy. Contrary to our expectations the volatile fraction fingerprints were not modified after irradiation experiments. A complementary non-destructive new approach by ESR spectroscopy was also proposed for discriminating between Romanite and Baltic ambers.     

Conventional radical polymerization and iodine‐transfer polymerization of 4′‐nonafluorobutyl styrene: Surface and thermal characterizations of the resulting poly(fluorostyrene)s

4′‐Nonafluorobutylstyrene (3) was synthesized and polymerized by conventional and controlled radical polymerization (iodine transfer polymerization (ITP)). Such an aromatic fluoromonomer was prepared from Ullmann coupling between 1‐iodoperfluorobutane and 4‐bromoacetophenone followed by a reduction and a dehydration in 50% overall yield. Two radical polymerizations of (3) were initiated by AIBN either under conventional or controlled conditions, with 1‐iodoperfluorohexane in 84% monomer conversion and in 50% yield. ITP of (3) featured a fast monomer conversion and a linear evolution of the ln([M]₀/[M]) versus time. The kinetics of radical homopolymerization of (3) enabled one to assess its square of the propagation rate to the termination rate (k_p²/k_t) in ITP conditions (36.2·10^?2 l·mol^?2·sec^?2 at 80 °C) from the Tobolsky's kinetic law. Polydispersity index (?) of the fluoropolymer achieved by conventional polymerization was 1.30 while it worthed 1.15 when synthesized by ITP. Thermal stabilities of these oligomers were satisfactory (10% weight loss under air occurred from 305 °C) whereas the melting point was 47 °C. Contact angles and surface energies assessed from spin‐coated poly(3) films obtained by conventional (hysteresis = 18°, surface energy 18 mN.m^?1) and ITP (hysteresis = 47°, surface energy 15 mN.m^?1) evidenced ? values' influence onto surface properties of the synthesized polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3202–3212     

Formation of simple organic molecules in the interstellar medium

In this work we present a methodology for the synthesis of simple molecules from basic formaldehyde (H₂CO) precursors. We have approached this challenging problem by considering a basic dimerization scheme that eventually leads to diose and methyl formate, using an HCO⁺ proton source. This species was chosen due to its ample abundance in the atmosphere. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Zur analytischen Behandlung des nichtlinearen aeroelastischen Galloping-Problems

Übersicht Es wird ein graphisch-numerisches Verfahren zur Lösung der nichtlinearen Galloping-Differential- gleichung dargelegt. Die Einzelheiten des Lösungsverfahrens werden beschrieben und an Hand eines typischen Beispiels näher erläutert.

---

Summary A graphical-numerical method for the solution of the non-linear Galloping differential equation is presented. The details of the analytical procedure are discussed and explained by means of a typical example.

---

---

Diese Arbeit entstand im Rahmen eines einjährigen Stipendiums der Alexander von Humboldt-Stiftung. Der Stipendiat Dr.-Ing. V. Manea ist Mitarbeiter im Institut de Mecanica Fluidelor si Constructii Aerospatiale, Bukarest.     

High Sensitive Microsensor Based on Organic‐Inorganic Composite for Two‐Dimensional Mapping of H2O2 by SECM

The present work describes the development of a selective, sensitive and stable sensing microsensor for scanning electrochemical microscopy (SECM) to measure H₂O₂ during electrochemical reduction of oxygen. The microsensor is based on graphene and Poly(3,4‐ethylenedioxythiophene) composite as support to iron (III) hexacyanoferrate (II) (PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor). The electrochemical properties of the PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor were investigated by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor showed an excellent electrocatalytic activity toward hydrogen peroxide (H₂O₂) reduction with a diminution of the overpotential of about 500 mV in comparison to the process at a bare gold microelectrode. The microsensor presented excellent performance for two dimensional mapping of H₂O₂ by SECM in 0.1 mol L^?1 phosphate buffer solution (pH 7.0). Under optimized conditions, a linear response range from 1 up to 1000 µmol L^?1 was obtained with a sensitivity of 0.08 nA L µmol^?1 and limit of detection of 0.5 µmol L^?1.     

A comparison between parallelization approaches in molecular dynamics simulations on GPUs

We test the relative performances of two different approaches to the computation of forces for molecular dynamics simulations on graphics processing units. A “vertex‐based” approach, where a computing thread is started per particle, is compared to an “edge‐based” approach, where a thread is started per each potentially non‐zero interaction. We find that the former is more efficient for systems with many simple interactions per particle while the latter is more efficient if the system has more complicated interactions or fewer of them. By comparing computation times on more and less recent graphics processing unit technology, we predict that, if the current trend of increasing the number of processing cores—as opposed to their computing power—remains, the “edge‐based” approach will gradually become the most efficient choice in an increasing number of cases. © 2014 Wiley Periodicals, Inc.     

A Cross-Entropy Approach to the Estimation of Generalized Linear Multilevel Models

In this article, we use the cross-entropy method for noisy optimization for fitting generalized linear multilevel models through maximum likelihood. We propose specifications of the instrumental distributions for positive and bounded parameters that improve the computational performance. We also introduce a new stopping criterion, which has the advantage of being problem-independent. In a second step we find, by means of extensive Monte Carlo experiments, the most suitable values of the input parameters of the algorithm. Finally, we compare the method to the benchmark estimation technique based on numerical integration. The cross-entropy approach turns out to be preferable from both the statistical and the computational point of view. In the last part of the article, the method is used to model the probability of firm exits in the healthcare industry in Italy. Supplemental materials are available online.     

Synthesis,characterization of nanosized CoAl<Subscript>2</Subscript>O<Subscript>4</Subscript> and its electrocatalytic activity for enhanced sensing application

Nanosized cobalt aluminate (CoAl₂O₄) was prepared by thermolysis of heteronuclear coordination compound, namely [Al₂Co(C₂O₄)₄(OH₂)₆]. The synthesized precursor was characterized by chemical analysis, vibrational spectra and thermal analysis. The cobalt aluminate obtained after a heating treatment of the precursor at 700 °C was characterized by IR, XRD, TEM coupled with SAED measurements. Two types of carbon-based electrodes, glassy carbon and boron-doped diamond electrodes were decorated with the obtained cobalt aluminate in order to enhance the electroanalytical performance for the tetracycline (TC) detection in the aqueous solutions. Cyclic voltammetry technique was used to determine the effect of the nanosized CoAl₂O₄ on the electrochemical oxidation of TC and as consequence, for TC detection at both carbon-based electrodes. The obtained cobalt aluminate exhibited the electrocatalytic activity toward TC detection in direct relation with the type of the carbon substrate, which allowed enhancing the electroanalytical parameters of TC detection in the aqueous solution.