Particle Characterization by Projected Area Determination

The projected areas of non-spherical particles do not represent an unambiguous particle characteristic. Depending on the orientation towards a constant observational direction, different projected areas result. The spectrum of all projected area values of a particle, if determined representatively, gives the probability with which a certain value is obtained by a single measurement. In this work, the frequency distributions of different examples of test objects were both calculated and measured. The objects were a cube, a rectangular parallelepiped and also three model agglomerates consisting of spheres of the same size. Instead of just one projected area, during each measuring procedure three projected areas from three orthogonal directions can be obtained. A mean value is then calculated to reduce the ambiguity of the particle characteristic and enhance the resolution. A suitable measurement set-up is introduced. The results of calculation and measurement are compared for observation from just one direction and also simultaneous observation from three directions. The frequency distributions of the equivalent diameters of the particle projected areas show a characteristic trend of the total curve with remarkable properties. The simultaneous measurement of three values from mutually orthogonal directions and their mean value calculation result in a much narrower distribution. In this case, a non-sphericity factor can additionally be calculated, whose frequency distribution contains information in a characteristic manner about the degree to which the particle shape differs from a sphere.     

Problems, Models and Complexity. Part II: Application to the DLSP

In Part I of this study, we suggest to identify an operations research (OR) problem with the equivalence class of models describing the problem and enhance the standard computer-science theory of computational complexity to be applicable to this situation of an often model-based OR context. The Discrete Lot-sizing and Scheduling Problem (DLSP) is analysed here in detail to demonstrate the difficulties which can arise if these aspects are neglected and to illustrate the new theoretical concept. In addition, a new minimal model is introduced for the DLSP which makes this problem eventually amenable to a rigorous analysis of its computational complexity.     

A model for the interaction of near-infrared laser pulses with metal powders in selective laser sintering

A thermal model of the interaction of pulsed near-infrared laser radiation from a Nd:YAG laser was made, taking the measured powder properties such as reflectance, optical penetration depth and thermal conductivity into account. It allows an estimation of the evolution of two different temperatures: the average temperature of the powder (taken over the grains in a volume given by the laser beam diameter and the optical penetration depth) and the temperature distinction within a single grain. It showed that in pulsed mode consolidation can be achieved at much lower average power as the surface of the powder particles are molten but their cores remain at nearly room temperature. This leads to a much lower average temperature and therefore a dramatic decrease in residual thermal stresses in the finished piece. The results of the model were experimentally tested and confirmed. Received: 26 July 2001 / Accepted: 23 November 2001 / Published online: 23 January 2002     

Runge–Kutta Methods for Itô Stochastic Differential Equations with Scalar Noise

A general class of stochastic Runge–Kutta methods for Itô stochastic differential equation systems w.r.t. a one-dimensional Wiener process is introduced. The colored rooted tree analysis is applied to derive conditions for the coefficients of the stochastic Runge–Kutta method assuring convergence in the weak sense with a prescribed order. Some coefficients for new stochastic Runge–Kutta schemes of order two are calculated explicitly and a simulation study reveals their good performance.     

Second order Runge–Kutta methods for Stratonovich stochastic differential equations

The weak approximation of the solution of a system of Stratonovich stochastic differential equations with a m–dimensional Wiener process is studied. Therefore, a new class of stochastic Runge–Kutta methods is introduced. As the main novelty, the number of stages does not depend on the dimension m of the driving Wiener process which reduces the computational effort significantly. The colored rooted tree analysis due to the author is applied to determine order conditions for the new stochastic Runge–Kutta methods assuring convergence with order two in the weak sense. Further, some coefficients for second order stochastic Runge–Kutta schemes are calculated explicitly. AMS subject classification (2000)  65C30, 65L06, 60H35, 60H10     

Design and Cold Tests of Asymmetric Quasioptical Resonators

This paper presents the design and test of asymmetric quasioptical resonators for gyrotron applications, where most of the diffraction output coupling comes from the smaller of two mirrors. A computer code based on scalar diffraction theory is used to calculate the resonator losses and the electric field near the mirrors. Resonators with mirror separations approaching confocal have reduced side lobes in the diffraction patterns, which should allow for better power transmission and focusing. Cold tests have been performed at 94 and 141 GHz to measure the quality factor of the asymmetric resonators as a function of mirror separation and mirror misalignment. Typical resonator parameters include 65 cm mirror separation, 1-3% output coupling and 85% of the losses from the small mirror. A half-symmetric resonator with one flat and one curved mirror has also been investigated. The calculated values of Q are in reasonably good agreement with the cold test measurements.     

Mehrfachbindungen zwischen Hauptgruppenelementen und Übergangsmetallen : XLIV. Synthesen von Hydrogensulfido- und Hydrogenselenido-Komplexen der Metalle Chrom, Molybdän und Wolfram

Hydrogenchalcogenido complexes of general composition (η⁵-C₅R₅)(CO)₃M(EH) (R = H, CH₃; M = Cr, Mo, W; E = S, Se) can be obtained by three different routes, sometimes in quite good yields. Thus, the sulfur and selenium derivatives can be synthesized by insertion of the respective elements into the metal-hydrogen bonds of the precursor compounds (η⁵-C₅R₅)(CO)₃MH. This species also reacts with potassium selenocyanate to yield the hydrogenselenido derivatives (η⁵-C₅R₅)(CO)₃M(SeH) which can also be obtained by treatment of the methyl complexes (η⁵-C₅R₅)(CO)₃M(CH₃ (M = Mo, W) with HBF₄ and Li[SeH]. The corresponding hydrogentellurido compounds are probably formed by these preparative methods but appear to be quickly converted into either the dinuclear tellurium bridge products (μ-Te)[(η⁵-C₅R₅)(CO)₃M]₂ (M = Mo) or into the hydrido complexes (η⁵-C₅R₅)(CO)₃MH (M= Mo, W) by release of elemental tellurium.