Effect of adenine on bacterial translocation using technetium-99m labeled E. coli in an intestinal obstruction model in rats

This study aims to investigate effects of adenine on bacterial translocation (BT) using ^99mTc-labeled E. coli in an intestinal obstruction rat model. In the study twenty-one rats were used. The rats were divided into three groups according to different feeding patterns. The control group (CG) was fed with a standard chow diet for 7 days. Group A1 and group A2 were fed with adenine supplemented chow diet for 7 days. At the end of the feeding period, after all groups was submitted intestinal obstruction. ^99mTc-E. coli was injected into the rats’ terminal ileum under anesthetic. The rats were sacrificed under aseptic conditions at 24th h after the surgery. The uptake of ^99mTc-E. coli was determined in organs such as the liver, mesenteric lymph nodes, spleen and ileum. Group A1 and group A2 results show that the uptake of ^99mTc-E. coli decreased in the blood and organs comparing to the CG. As a result, it was observed that adenine reduced the level of BT when compared with CG. The beneficial effect of adenine on BT in intestinal obstruction was observed. However, further studies are needed to more clearly assess how this benefit can be achieved.     

Investigating microcrystalline cellulose crystallinity using Raman spectroscopy

Cellulose - Microcrystalline cellulose (MCC) is a semi-crystalline material with inherent variable crystallinity due to raw material source and variable manufacturing conditions. MCC crystallinity...     

Fabrication of a Single Layer and Bilayer Potentiometric Biosensors for Penicillin by Galvanostatic Entrapment of Penicillinase into Polypyrrole Films

A single layer and bilayer potentiometric biosensors for the detection of penicillin have been developed. The favourable conditions that were established for the polypyrrole‐penicillinase ((PPy‐P’nase) single layer biosensor were 0.03 M pyrrole, 50 U/mL P’nase, 0.01 M penicillin, applied current density of 0.9 mA/cm² and a polymerisation time of 40 s. The optimum conditions for the formation of the outer layer of the bilayer were: (a) 0.1 M Py, 19 U/mL P’nase, 0.01 M pen, current density of 0.9 mA/cm² and a polymerisation time of 40 s. The minimum detectable penicillin concentration with the bilayer potentiometric biosensor was 0.3 µM and the linear concentration range was 7.5–146 µM. The average percentage recovery of penicillin that was found in amoxycillin 500 mg was 113±24 %. The determination of penicillin in milk was fraught with problems of non‐specific binding of penicillin to the milk.     

Artificial intelligence–based models for the qualitative and quantitative prediction of a phytochemical compound using HPLC method

Isoquercitrin is a flavonoid chemical compound that can be extracted from different plant species such as Mangifera indica (mango), Rheum nobile , Annona squamosal , Camellia sinensis (tea), and coriander ( Coriandrum sativum L.). It possesses various biological activities such as the prevention of thromboembolism and has anticancer, antiinflammatory, and antifatigue activities. Therefore, there is a critical need to elucidate and predict the qualitative and quantitative properties of this phytochemical compound using the high performance liquid chromatography (HPLC) technique. In this paper, three different nonlinear models including artificial neural network (ANN), adaptive neuro-fuzzy inference system (ANFIS), and support vector machine (SVM),in addition to a classical linear model [multilinear regression analysis (MLR)], were used for the prediction of the retention time (tR) and peak area (PA) for isoquercitrin using HPLC. The simulation uses concentration of the standard, composition of the mobile phases (MP-A and MP-B), and pH as the corresponding input variables. The performance efficiency of the models was evaluated using relative mean square error (RMSE), mean square error (MSE), determination coefficient (DC), and correlation coefficient (CC). The obtained results demonstrated that all four models are capable of predicting the qualitative and quantitative properties of the bioactive compound. A predictive comparison of the models showed that M3 had the highest prediction accuracy among the three models. Further evaluation of the results showed that ANFIS–M3 outperformed the other models and serves as the best model for the prediction of PA. On the other hand, ANN–M3proved its merit and emerged as the best model for tR simulation. The overall predictive accuracy of the best models showed them to be reliable tools for both qualitative and quantitative determination.     

Characterization and kinetics analysis of the thermal decomposition of the humic substance from hazelnut husk

A humic substance was obtained from hazelnut husk using an alkali extraction. The chemical and morphological structure of the humic matter was characterized via elemental analysis, Fourier transform infrared spectrometry (FTIR), nuclear magnetic resonance, Brunauer-Emmet-Teller (BET) analysis, scanning electron microscopy (SEM), and thermogravimetric-FTIR (TG-FTIR). In addition, thermal analysis measurements TG analysis-differential thermogravimetry/differential scanning calorimetry (TGA-DTG/DSC) were performed under dynamic air conditions to better determine the origin, physical and chemical structure, and decomposition process of the humic matter. The Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) methods were used to calculate the kinetic parameters of the high-temperature decomposition process. It was observed that the activation energy values were almost constant at certain conversion and temperature intervals. In addition, the structure of the humic substance at different temperatures was also investigated via FTIR analysis. It was found that the obtained humic substance had a very stable structure and decomposed at a high temperature. The stability of the humic matter can be a useful tool in the environmental quality research of soil.     

Structural properties of new spiro-1,3-propanediaminocyclotriphosphazene derivatives

New 1,3-propanediaminocyclotriphosphazene derivatives (7-17) were synthesized from the reactions of spiro-1,3-propanediaminocyclotriphosphazene, N₃P₃Cl₄[NH(CH₂)₃NH] (1) with the cyclopropanemethylamine (2), cyclohexylamine (3), pyrrolidine (4) cyclohexanol (5), cyclopropylmethanol (6). The structures of the novel compounds (7-17) were characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy. The molecular structures of 8, 12 and 13 were determined by X-ray crystallography. The structures of all these three compounds are in the monoclinic crystal system; compounds 8 and 12 have the P21/c space group while compound 13 has the P21/n space group. The ring conformation of the cyclotriphosphazene and other external rings were investigated based on the X-ray crystal structures.     

Improvement in the Physicochemical Properties of Ketoconazole through Complexation with Cyclodextrin Derivatives

Highly-soluble cyclodextrin derivatives, such as hydroxypropyl--cyclodextrin(HP--CD) and methyl--cyclodextrin (MEB), were tested as solubilizingagents for ketoconazole, with the aim of improving the physicochemical andbiopharmaceutical properties of this lipophilic imidazole antifungal agent. Productswere prepared in four molecular ratios by physical mixing, kneading and spray-dryingmethods. The kneaded products in a ratio of 1:2 and the spray-dried products exhibitedthe highest dissolution rates. The phase solubility diagrams of ketoconazole with thesecyclodextrins at 25 °C in water and in simulated intestinal medium wereconstructed. A solubility diagram of A_L type was obtained with HP--CD, and one of A_P type with MEB. The complexes were characterized by thermal methods(DSC, TG, DTG and DTA). Multicomponent systems were prepared with tartaric acid.The effects of water-soluble polymers, e.g., polyvinylpyrrolidone, on the aqueous solubility of ketoconazole were investigated. Particle size distribution, surface area, partition coefficient, heat of dissolution and wettability studies were also carried out. The formation of inclusion complexes was observed by means of thermoanalytical studies.     

Les cyclodextrines a large cycle : synthèse, purification et applications

The large ring cyclodextrins (with more than 8 glucose units) existence was first described in the 1950s. Because of their hard purification and low yield, these molecules were little studied until recently. Since large ring cyclodextrins have unique structures compared to α-, β- and γ-cyclodextrin, they could offer new opportunities for specific host-guest complex and thus enlarge the area of cyclodextrin applications. This paper gives a literature survey regarding the synthesis, the purification and the applications of cyclodextrins containing more than eight glucose units.     

Multiagent cooperation for solving global optimization problems: an extendible framework with example cooperation strategies

This paper proposes the use of multiagent cooperation for solving global optimization problems through the introduction of a new multiagent environment, MANGO. The strength of the environment lays in its flexible structure based on communicating software agents that attempt to solve a problem cooperatively. This structure allows the execution of a wide range of global optimization algorithms described as a set of interacting operations. At one extreme, MANGO welcomes an individual non-cooperating agent, which is basically the traditional way of solving a global optimization problem. At the other extreme, autonomous agents existing in the environment cooperate as they see fit during run time. We explain the development and communication tools provided in the environment as well as examples of agent realizations and cooperation scenarios. We also show how the multiagent structure is more effective than having a single nonlinear optimization algorithm with randomly selected initial points.