Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.     

Experimental study of a broad-band XeCl double-pass amplifier with SBS mirror

An oscillator-amplifier XeCl laser system has been used to experimentally investigate the effectiveness of a liquid stimulated Brillouin scattering (SBS) mirror for correcting the spatial aberrations of broad-band laser radiation in a double-pass amplifier. It has been found that the SBS amplifier performance is strongly dependent on the intensity I _p exciting the Brillouin medium. A good beam reconstruction has been attained at I _p1GW/cm², whereas highly aberrated output beams have been delivered by the SBS amplifier for I _p>1 GW/cm². By comparing the broad-band SBS amplifier performance to that of the same amplifier with a dielectrically coated flat mirror at one end, it has been found that the use of a SBS mirror is advantageous to obtain lower divergence output beams only for low energy pump beams (<1 mJ).     

Reaction of ketenes with N,N-disubstituted α-aminomethyleneketones VIII. Synthesis of N,N-disubstituted 4-amino-3-chloro-6-phenyl-2H-pyran-2-ones

The dipolar 1,4-cycloaddition of dichloroketene to N,N-disubstituted 3-amino-1-phenyl-2-propene-1-onesled directly to N,N-disubstituted 4-amino-3-chloro-6-phenyl-2H-pyran-2-ones only in the case of an usual aliphatic N,N-disubstitution. In the case of partial or full aromatic N-substitution, N,N-disubstituted 4-amino-3,3-dichloro-3,4-dihydro-6-phenyl-2H-pyran-2-ones were instead obtained, which were dehydrochlorinated with DBN to the corresponding 4-amino-3-chloro-6-phenyl-2H-pyran-2-ones.     

Quantitative gas chromatographic analysis of perhalogenated compounds using a flame lonization detector

Summary In the determination of several perhalogenated compounds after gas chromatographic separation on an Apiezon L column, using a flame ionization detector, all the compounds tested gave linear area-mass plots although the coefficients observed do not lead to extrapolations which would permit quantitation of perhalogenated compounds for which no standard is available. Of the compounds tested, dibromodichloromethane, tetrachloroethene and tetrabromoethene gave good linear correlations of area ratio-mass ratio (using n-decane as the internal standard). Bromotrichloromethane and tetrabromomethane gave continuously curving area ratio-mass ratio plots which were very reproducible and could be used for graphical interpolation.     

Partitioning of metals between the aqueous phase and suspended insoluble material in fog droplets

This paper discusses the partitioning of metals (K, Na, Ca, Mg, Al, Cu, Fe, Pb and Zn) between the aqueous phase and the suspended insoluble material in fog samples collected in the Po Valley during two extensive fields campaigns. Metals represent on average 11% of the mass of suspended insoluble matter, while the main component is carbon (both organic carbon, OC = 35%, and black carbon, BC = 8%). The unaccounted suspended matter mass is very high, on average 46%, and is attributable to non metallic species, such as O and N and of Si. The principal metals in the insoluble suspended fraction are Fe and Al (2-5%), while the contributions of other metals (Na, Mg, Cu, Pb and Zn) are lower than 1%. Ca and K exhibited high blank values and could not be detected above blank detection limit threshold. The main components in the aqueous phase are NO3- (34%), WSOC (23%), SO4(2-) (18%) and NH4+ (19%), while trace metals and remaining cations and anions accounted for less than 1% of solute mass. The main dissolved trace metals in fog droplets are Zn, Al and Fe, while the main metallic cations are Na and Ca. Fe and Al are the only metals preferentially distributed in the suspended insoluble matter of fog droplets (partitioning ratio respectively 37% and 33%). All other metals are mostly dissolved in the aqueous phase (mean partitioning ratios of Mg, Pb, Zn, Cu and Na are 69%, 70%, 77%, 81% and 87%). These findings are in agreement with literature data on metal speciation in cloud and rain samples. The dependence of partitioning ratios on pH is investigated for the different metals, with only Al showing a clear partitioning ratio decrease with increasing pH. Conversely, the other metals show no dependence or a complex and highly variable behaviour. The partitioning ratio of iron (mean 37%) observed in the Po Valley fog samples is much higher than the water extractable iron in aerosol particles (typically 1-2 %): this fact can be explained by differences in the aerosol sources and composition among sites and by chemical processes in the aqueous phase, such as complexation and redox reactions involving organic ligands (oxalate, or other organic acids as humic-like organic matter) which may promote Fe solubility.     

Molecular structure-activity relationships for the oxidation of organic compounds using mesoporous silica catalysts derivatised with bis(halogeno)dioxomolybdenum(VI) complexes

Mo K-edge XAFS spectra have been measured for ordered mesoporous silica MCM-41 grafted with the complexes [MoO2X2(thf)2] (X=Cl, Br). For grafting reactions in the absence of triethylamine, materials with 1 wt. % Mo are obtained; the Mo K-edge EXAFS results indicate the co-existence of isolated surface-fixed monomeric species [MoO2[(-O)3SiO]2(thf)(n)] and [MoO2[(-O)3SiO]X(thf)(n)]. When Et3N is used in the grafting reactions, materials with 4 wt. % Mo are obtained. The EXAFS data for the material prepared using [MoO2Cl2(thf)2] and Et3N indicate the presence of dinuclear species with two Mo(VI) centres, each with two Mo=O groups and each linked by one or two oxo bridges (Mo...Mo 3.27 A). The molybdenum centres in the material prepared using the dibromo complex comprise mainly isolated four-coordinate dioxomolybdenum(VI) and trioxomolybdenum(VI) monomeric species, with a small contribution from dimeric species. All materials were further characterised in the solid state by powder X-ray diffraction, N2 adsorption analysis, MAS NMR (13C, 29Si) and FTIR spectroscopy. The derivatised MCMs perform differently as catalysts in the liquid-phase oxidation of various olefins and alcohols with tert-butyl hydroperoxide. The highest alkene epoxidation activity was recorded for the catalysts with low metal loading, whereas the material containing oxo-bridged dimers had the highest activity for oxidation of alcohols. The recyclability of all the catalysts was tested: the catalytic activity of the derivatised materials tended to stabilize with ageing.     

A Ten Years Monitoring of Chlorofluorocarbons at the Antarctica: Results and Perspectives

Abstract

Chlorofluorocarbons are man-made long lasting atmospheric pollutants of great environmental concern, responsible for important global change phenomena. Recently, they were replaced by hydrogenated halocarbons that, even if less persistent, do not lack in environmental impact. Atmospheric concentrations of these compounds were measured in Antarctica by gas chromatography. The extremely low atmospheric mixing ratios of these compounds require a pre-concentration step of the air sample on suitable adsorbent in order to meet the sensitivity of the analytical method Results obtained analyzing air samples collected in Antarctica since 1988 for the determination of CFC-12 and CFC-11 are reported, together with data concerning the less abundant species.     

Wide Oscillation Finite Time Blow Up for Solutions to Nonlinear Fourth Order Differential Equations

We give sufficient conditions for local solutions to some fourth order semilinear ordinary differential equations to blow up in finite time with wide oscillations, a phenomenon not visible for lower order equations. The result is then applied to several classes of semilinear partial differential equations in order to characterize the blow up of solutions including, in particular, its applications to a suspension bridge model. We also give numerical results which describe this oscillating blow up and allow us to suggest several open problems and to formulate some related conjectures.