Kinetic modeling studies of ethylene polymerization reactions using supported chromium catalysts

Kinetic models for ethylene polymerization based on a general coordination–insertion mechanism, in which either a monocoordinated species or a bicoordinated species could lead to migratory insertion, were constructed. These models were implemented through the solution of a set of differential equations resulting from the material balances for all the species involved. The application of these kinetic models to monomer consumption for different supported catalysts produced very good fittings and allowed the estimation of the kinetic rate constants of each elementary step. Although the same kinetic scheme was used to describe all the observations, the results of the fitting showed that the supported chromium species behaved very differently according to the support. Only in the case of the silica‐supported catalysts was mechanical fragmentation of the particles observed during the course of the reaction, and this implied the inclusion of a new term in the model. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3464–3472, 2004     

A diquark model for baryon spectroscopy

A quark-diquark approximation is used to investigate the mass spectroscopy of the spin-1/2 baryons belonging to theSU(3)-flavor group in a nonrelativistic potential approach. The baryon spectra obtained are confronted with relativistic results and experimental data. Root-mean-square radii are also calculated.     

Improvement of speciation analysis in environmental matrices. Identification of refractory arsenicals—some analytical difficulties

Arsenic species that do not form hydrides have been recently put in evidence in coastal seawater. This paper describes the procedures used in the first attempts to concentrate, purify and identify these forms as well as the difficulties that make this identification problematic. The rationale behind a new scheme under investigation based on solvent extraction/high-performance liquid chromatography/dynamic-flow-fast-atom-bombardment mass spectrometry is presented. Some alternatives that seem promising for the future are indicated.     

The mass spectra of organic compounds. 7th Communication. 4,4-Dimethyl-1-pentene

Loss of CH, CH₄, C₂H₄, C₃H, C₃H₆ and C₃H₇ from the molecular ions of a number of ¹³C-labeled analogs of 4,4-dimethyl-1-pentene was studied both in normal (source) 70-eV electron impact (EI) spectra dn in metastable spectra. For loss of CH in the source, 96% of the methyl comes frm positions of 5, 5′ and 5″, while the remainder comes from position 1. In the metastable spectra, loss of C-1 (16%) and C-3 (9%) is increasing in importance. The loss of ethylene is a particular case: either C-1 or C-3 are lost with any other C-atom from positions 2,5,5′, and 5″ (8 × 10%) in the metastable spectra, the probability for simultaneous loss of C-1 and C-3 being 6%. If C-1 seems to these two positions become completely equivalent in the metastable time range. The T-values (kinetic energy release) for the different positions show small, but statisticaly different values and a small isotope effect. Loss of C₃H₅ (allylic cleavage) is 100% C-1, C-2 and C-3, i.e., no evidence for skeletal rearrangement is seen. This is also true for loss of C₃C₆ (McLafferty rearrangement) within the source, but in metastable decay the other positions gain in importance. The neutral fragment C₃H appears to be the the result of consecutive loss of CH and C₃H₄, rather than a one-step loss of propyl radical or the inverse reactions sequence. No metastable reaction can be seen for this reaction. Decomposition of labeled C₆H and C₅H secondary ions occurs in an essentially random fashion.     

Determination of As, Ge, Hg, Pb, Sb, Se and Sn in coal slurries by CVG-ETV-ICP-MS using external or isotopic dilution calibration

A method for the multi-elemental determination of As, Ge, Hg, Pb, Sb, Se and Sn in coal reference materials by slurry sampling chemical vapor generation (CVG) using external calibration and isotopic dilution (ID) calibration and detection by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) is proposed. As, Ge, Sb, Se and Sn were determined using the external calibration, while, Hg, Pb, Se and Sn were determined by isotopic dilution. About 50–250 mg of sample was mixed with an acid solution, containing aqua regia and HCl, in an ultrasonic bath. For the isotopic dilution calibration, the enriched isotopes ²⁰¹Hg, ²⁰⁶Pb, ⁷⁷Se and ¹¹⁹Sn were added to the slurry in an adequate amount in order to produce an altered isotopic ratio close to 1. The vapor produced by the reaction of the sample slurry with the reducing agent was transported to the vaporizer and trapped in a Ir-treated graphite tube at 200 °C, before vaporization at 2100 °C and transportation of the vapor to the plasma. The accuracy of the method was assured by the analysis of four certified reference coal samples, using external calibration with aqueous solutions, prepared in the same medium and subjected to the same CVG and trapping procedure as the slurries and also by isotopic dilution calibration. The obtained concentrations were in agreement with the certified values, using the t-Student test for a confidence level of 95%. The detection limits (3 s; n = 5) of isotopic dilution, in ng g^− 1, were: 0.4 for Hg, 900 for Pb, 0.3 for Se and 0.2 for Sn. For external calibration, the detection limits, in ng g^− 1, were: 1.6 for As, 0.1 for Ge, 0.3 for Sb, 0.9 for Se and 7.5 for Sn. The relative standard deviations generally were lower than 14%, adequate for slurry analysis.     

Thermal and radiation annealing in131I−-doped periodate crystals

Isothermal annealing at temperatures between 90 and 250°C and radiation annealing at 40, –76 and –196°C were studied in sodium periodate crystals doped by rapid crystallization and by spray techniques. The results showed the occurrence of transfer annealing because the dopant was converted to the oxidized forms of iodate and periodate depending on the treatment conditions. Similarities with the annealing behaviour of recoil species in neutron irradiated periodate systems are established and the Bellido and Wiles stepwise oxidation model is used to explain the mechanism of the processes.     

A solid-phase extraction procedure for the clean-up of thiram from aqueous solutions containing high concentrations of humic substances

A simple solid-phase extraction (SPE) procedure with an octadecyl bonded phase silica (C₁₈) was developed for clean-up of the fungicide thiram from aqueous solutions containing high concentrations of humic substances, for future studies of thiram adsorption onto solid humic substances or soils. Suspensions of humic acids and soil, in aqueous 0.01 M CaCl₂ solution, were prepared and used as samples. These extracts were spiked with thiram and immediately applied to a C₁₈-SPE cartridge. Thiram was eluted with chloroform and its concentration measured by spectrophotometry at 283 nm. Non-spiked aqueous extracts (blanks) and a control sample of thiram in 0.01 M CaCl₂ aqueous solution were also prepared and submitted to the same SPE procedure. The results show that humic substances are extensively retained by the C₁₈ cartridge but are not eluted with CHCl₃. Recoveries of 100-104% were obtained for thiram in the presence of humic substances. The SPE procedure described in this work is an efficient clean-up step to remove the interference of humic substances absorbance and to be coupled to any spectrophotometric or HPLC-UV method, usually used for thiram analysis in food extracts.     

Oxyradical-mediated Clastogenic Plasma Factors in Psoriasis: Increase in Clastogenic Activity after PUVA

Abstract— Psoriasis is a common skin disorder characterized by hyperproliferation and incomplete differentiation of epidermal keratinocytes. Psoralen plus UVA (PUVA) is one of the treatments proposed for this disease. We had reported previously that exposure of regular blood cultures from healthy donors to PUVA leads to chromosomal breakage via the formation of transferable clastogenic materials, a phenomenon inhibitable by superoxide dismutase. In the present paper we show that these clastogenic factors (CF) are also formed in vivo. The CF were found in about 50% of the psoriasis patients studied (14 out of 31). In PUVA-treated psoriasis patients, the clastogenic activity of the plasma increased significantly between the first and the last (16th) exposure to PUVA. We hypothesize that CF formation in psoriasis is similar to that in other diseases accompanied by oxidative stress, in particular chronic inflammatory diseases with autoimmune reactions such as lupus erythematosus, progressive systemic sclerosis, rheumatoid arthritis and others. Increased superoxide production by phagocytes, formation of lipid peroxidation products and release of cytokines are considered to be responsible for the superoxide-stimulating and chromosome-damaging properties of patients' plasma. During PUVA therapy, superoxide generated via the interaction of psoralen with UVA may contribute to CF formation in addition to superoxide from inflammatory cells. An increased risk of cancer and leukemia is observed in diseases accompanied by CF formation. Therefore CF may contribute to the well-known risk of photocarcinogenesis by PUVA therapy. This additional risk may be preventable by antioxidants and superoxide scavengers.     

Optimised hydrothermal synthesis of multi-dimensional hybrid coordination polymers containing flexible organic ligands

In this paper, we summarise our recent research interest in the hydrothermal synthesis and structural characterisation of multi-dimensional coordination polymers. The use of N-(phosphonomethyl)iminodiacetic acid (also referred to as H₄pmida) in the literature as a versatile chelating organic ligand is briefly reviewed. This molecule plays an important role in the formation of centrosymmetric dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units, which were first used by us as building blocks to construct novel coordination polymers. Starting with [V₂O₂(pmida)₂]⁴⁻ in solution, we have isolated [M₂V₂O₂(pmida)₂(H₂O)₁₀] species (where M²⁺ = Mn²⁺, Co²⁺ or Cd²⁺) via the hydrothermal synthetic approach, which were then employed for the construction of [CdVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5·(H₂O), [CoVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5, [Co(H₂O)₆][CoV₂O₂(pmida)₂(pyr)(H₂O)₂]·2(H₂O) and [Cd₂V₂O₂(pmida)₂(pyr)₂(H₂O)₄]·4(H₂O) by the inclusion of bridging organic ligands in the reactive mixtures, such as pyrazine (pyr) and 4,4′-bipyridine (4,4′-bpy). These materials can contain channel systems, and exhibit magnetic behaviour, not only due to the V⁴⁺ centres but also to the transition metal centres which establish the links between neighbouring dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units. A closely related anionic moiety, [Ge₂(pmida)₂(OH)₂]²⁻, was engineered to allow the study of such crystalline hybrid materials using one- and two-dimensional high-resolution solid-state NMR.