Conformational analysis of the disaccharide methyl α‐d‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d‐mannopyranoside monohydrate

The crystal structure of methyl α‐d ‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d ‐mannopyranoside monohydrate, C₁₅H₂₆O₁₂·H₂O, ( II ), has been determined and the structural parameters for its constituent α‐d ‐mannopyranosyl residue compared with those for methyl α‐d ‐mannopyranoside. Mono‐O‐acetylation appears to promote the crystallization of ( II ), inferred from the difficulty in crystallizing methyl α‐d ‐mannopyranosyl‐(1→3)‐β‐d ‐mannopyranoside despite repeated attempts. The conformational properties of the O‐acetyl side chain in ( II ) are similar to those observed in recent studies of peracetylated mannose‐containing oligosaccharides, having a preferred geometry in which the C2—H2 bond eclipses the C=O bond of the acetyl group. The C2—O2 bond in ( II ) elongates by ～0.02 Å upon O‐acetylation. The phi (?) and psi (ψ) torsion angles that dictate the conformation of the internal O‐glycosidic linkage in ( II ) are similar to those determined recently in aqueous solution by NMR spectroscopy for unacetylated ( II ) using the statistical program MA′AT, with a greater disparity found for ψ (Δ = ～16°) than for ? (Δ = ～6°).     

Tyrosine nitration of human ERK1 introduces an intra-hydrogen bond by molecular dynamics simulations

Structural Chemistry - ERK1 is an important kinase in Ras–Raf–MEK signaling. We have recently demonstrated by mass spectrometry that Tyr210 of ERK1 can be nitrated, and the nitration...     

Alkali Blues: Blue-Emissive Alkali Metal Pyrrolates

2-Iminopyrroles [H^tBuL, 4-tert-butyl phenyl(pyrrol-2-ylmethylene)amine] are non-fluorescent π systems. However, they display blue fluorescence after deprotonation with alkali metal bases in the solid state and in solution at room temperature. In the solid state, the alkali metal 2-imino pyrrolates, M(^tBuL), aggregate to dimers, [M(^tBuL)(NCR)]₂ (M=Li, R=CH₃, CH(CH₃)CNH₂), or polymers, [M(^tBuL)]_n (M=Na, K). In solution (solv=CH₃CN, DMSO, THF, and toluene), solvated, uncharged monomeric species M(^tBuL)(solv)_m with N,N′-chelated alkali metal ions are present. Due to the electron-rich pyrrolate and the electron-poor arylimino moiety, the M(^tBuL) chromophore possesses a low-energy intraligand charge-transfer (ILCT) excited state. The chelated alkali cations rigidify the chromophore, restricting intramolecular motions (RIM) by the chelation-enhanced fluorescence (CHEF) effect in solution and, consequently, switch-on a blue fluorescence emission.     

Imprinting with sensor development – On the way to synthetic antibodies

Molecular imprinting is an attractive tool for the development of artificial recognition systems. Even non-covalent imprinting provides universal interaction centers for sensoric applications. The coated chemical sensors have high stabilities under harsh conditions in both the gas and liquid phases. With adequate efforts optical and mass-sensitive sensors (quartz crystal microbalance, QCM, surface acoustic wave detector, SAW) are suitable for analysis down to the ppb (nL/L) range. PAHs, isomer VOCs as well as complex oil mixtures are appropriate analytes. Received: 4 November 1998 / Revised: 29 April 1999 / Accepted: 5 May 1999     

Synthesis and Crystal Structures of Two Novel Anionic Aluminophosphates: A One-Dimensional Chain, UT-7 ([Al(3)P(5)O(20)H](5-)[C(7)H(13)NH(3)(+)](5)), and a Layer Containing Two Cyclic Amines, UT-8 ([Al(3)P(4)O(16)](3-)[C(4)H(7)NH(3)(+)](2)[C(5)H(10)NH(2)(+)])

UT-7 and UT-8 (University of Toronto, structure numbers 7 and 8) are two novel aluminophosphate materials prepared under non-aqueous conditions. Their structures, extended in one and two dimensions, respectively, have been solved by single-crystal X-ray diffraction and characterized by a variety of methods including powder X-ray diffraction (PXRD), insitu high-temperature PXRD, thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX), and scanning electron microscopy (SEM). UT-7 ([Al(3)P(5)O(20)H](5)(-)[C(7)H(13)NH(3)(+)](5), triclinic space group P&onemacr;, Z = 2, a = 10.118(3) ?, b = 15.691(4) ?, c = 18.117(3) ?, alpha = 72.91(2) degrees, beta = 85.18(2) degrees, gamma = 79.49(2) degrees ) is built of polymeric one-dimensional chain units, hydrogen-bonded into anionic layers that are charge-compensated by interlamellar cycloheptylammonium cations. UT-7 is isostructural to our previously discovered UT-3 chain structure, isolated in the analogous cyclopentylamine system. UT-8 ([Al(3)P(4)O(16)](3-)[C(4)H(7)NH(3)(+)](2)[C(5)H(10)NH(2)(+)], monoclinic space group P2(1), Z = 2, a = 8.993(4) ?, b = 14.884(8) ?, c = 9.799(9) ?, beta = 103.52(3) degrees ) is a two-dimensional net isostructural to several previously reported [Al(3)P(4)O(16)](3)(-) layers. The interlayer region of UT-8 is occupied by two different cyclic organic amine species, namely piperidinium and cyclobutylammonium. To our knowledge, this is the first report of the crystal structure of an aluminophosphate material containing cyclobutylammonium or a mixture of cyclic amines. Interestingly, UT-7 is observed to thermally transform in the solid state to an as yet unknown layered material that can be independently synthesized in a similar synthetic system. In the same way as UT-3 transforms to the UT-4 layered phase, we believe UT-7 transforms to a layered material by means of a chain to layer transformation.     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Studies on the synthesis of the lasubine alkaloids

Formal syntheses of lasubine II and subcosine II have been completed by the synthesis of epi-lasubine II. The synthesis involves diastereoselective allylation of a methoxy isoxazolidine and a tandem hydrogenation process leading stereoselectively to a trisubstituted piperidine.     

Visible‐Light Photocatalysis: Does It Make a Difference in Organic Synthesis?

Visible‐light photocatalysis has evolved over the last decade into a widely used method in organic synthesis. Photocatalytic variants have been reported for many important transformations, such as cross‐coupling reactions, α‐amino functionalizations, cycloadditions, ATRA reactions, or fluorinations. To help chemists select photocatalytic methods for their synthesis, we compare in this Review classical and photocatalytic procedures for selected classes of reactions and highlight their advantages and limitations. In many cases, the photocatalytic reactions proceed under milder reaction conditions, typically at room temperature, and stoichiometric reagents are replaced by simple oxidants or reductants, such as air, oxygen, or amines. Does visible‐light photocatalysis make a difference in organic synthesis? The prospect of shuttling electrons back and forth to substrates and intermediates or to selectively transfer energy through a visible‐light‐absorbing photocatalyst holds the promise to improve current procedures in radical chemistry and to open up new avenues by accessing reactive species hitherto unknown, especially by merging photocatalysis with organo‐ or metal catalysis.     

Peptide‐Guided Assembly of Repeat Protein Fragments

Herein, we present the peptide‐guided assembly of complementary fragments of designed armadillo repeat proteins (dArmRPs) to create proteins that bind peptides not only with high affinity but also with good selectivity. We recently demonstrated that complementary N‐ and C‐terminal fragments of dArmRPs form high‐affinity complexes that resemble the structure of the full‐length protein, and that these complexes bind their target peptides. We now demonstrate that dArmRPs can be split such that the fragments assemble only in the presence of a templating peptide, and that fragment mixtures enrich the combination with the highest affinity for this peptide. The enriched fragment combination discriminates single amino acid variations in the target peptide with high specificity. Our results suggest novel opportunities for the generation of new peptide binders by selection from dArmRP fragment mixtures.     

LiSr2[ReN4] und LiBa2[ReN4] – isotype Nitridorhenate(VII)

LiSr₂[ReN₄] and LiBa₂[ReN₄] – isotypic Nitridorhenates(VII) The quaternary nitridorhenates(VII) LiAE₂[ReN₄] (AE = Sr, Ba) were synthesized by reaction of the metals with molecular nitrogen at 850–900 °C. The plate‐like, nearly colourless crystals were investigated by X‐ray single crystal methods and were identified as isotypic phases: LiSr₂[ReN₄] (LiBa₂[ReN₄]); monoclinic, P2₁/m; a = 614.64(8) pm (651.04(12) pm), b = 585.97(6) pm (b = 598.86(9) pm), c = 689.70(17) pm (737.43(5) pm), β = 106.375(4)° (108.535(2)°); Z = 2. Crystals of the strontium compound were systematically twinned along [001]. In the crystal structures of the quaternary compounds the alkaline earth‐ and nitride‐ ions are arranged in the motif of the InNi₂‐type structure. Strontium and barium are in a trigonal prismatic coordination by nitrogen (Sr–N: 261.0(7)–284.3(4) pm; Ba–N: 278.0(7)–303.0(6) pm). One half of the tetrahedral voids within the partial structure formed by stacking of trigonal prismatic rod layers is occupied by rhenium (formation of [Re^VIIN₄]^5–‐tetrahedra; Re–N: 181.0(6)–184.5(8) pm), lithium takes the positions of the remaining tetrahedral sites (Li–N: 2 × 198(1) pm, 224(2) pm and 228(2) pm for the strontium phase). In the barium compound the lithium positions show a larger shift from the tetrahedral centres towards a tetrahedral plane (Li–N: 2 × 195(1) pm, 213(2) pm and 304(2) pm).