Continuous Synthesis of Peralkylated Imidazoles and their Transformation into Ionic Liquids with Improved (Electro)Chemical Stabilities

A versatile and efficient method to synthesize tetrasubstituted imidazoles via a one‐pot modified Debus–Radziszewski reaction and their subsequent transformation into the corresponding imidazolium ionic liquids is reported. The tetrasubstituted imidazoles were also synthesized by means of a continuous flow process. This straightforward synthetic procedure allows for a fast and selective synthesis of tetrasubstituted imidazoles on a large scale. The completely substituted imidazolium dicyanamide and bis(trifluoromethylsulfonyl)imide salts were obtained via a metathesis reaction of the imidazolium iodide salts. The melting points and viscosities are of the same order of magnitude as for their non‐substituted analogues. In addition to the superior chemical stability of these novel ionic liquids, which allows them to be applied in strong alkaline media, the improved thermal and electrochemical stabilities of these compounds compared with conventional imidazolium ionic liquids is also demonstrated by thermogravimetrical analysis (TGA) and cyclic voltammetry (CV). Although increased substitution of the ionic liquids does not further increase thermal stability, a definite increase in cathodic stability is observable.     

Task-specific ionic liquid for solubilizing metal oxides

Protonated betaine bis(trifluoromethylsulfonyl)imide is an ionic liquid with the ability to dissolve large quantities of metal oxides. This metal-solubilizing power is selective. Soluble are oxides of the trivalent rare earths, uranium(VI) oxide, zinc(II) oxide, cadmium(II) oxide, mercury(II) oxide, nickel(II) oxide, copper(II) oxide, palladium(II) oxide, lead(II) oxide, manganese(II) oxide, and silver(I) oxide. Insoluble or very poorly soluble are iron(III), manganese(IV), and cobalt oxides, as well as aluminum oxide and silicon dioxide. The metals can be stripped from the ionic liquid by treatment of the ionic liquid with an acidic aqueous solution. After transfer of the metal ions to the aqueous phase, the ionic liquid can be recycled for reuse. Betainium bis(trifluoromethylsulfonyl)imide forms one phase with water at high temperatures, whereas phase separation occurs below 55.5 degrees C (temperature switch behavior). The mixtures of the ionic liquid with water also show a pH-dependent phase behavior: two phases occur at low pH, whereas one phase is present under neutral or alkaline conditions. The structures, the energetics, and the charge distribution of the betaine cation and the bis(trifluoromethylsulfonyl)imide anion, as well as the cation-anion pairs, were studied by density functional theory calculations.     

Synthesis of functionalized furopyrazines as restricted dipeptidomimetics

Herein, an efficient synthetic approach to a furopyrazine scaffold with four points of diversity, starting from 2(1H)-pyrazinones, with dipeptomimetic properties, is presented. R-groups corresponding to amino acid side chains were introduced during the 2(1H)-pyrazinone and subsequent furopyrazine formation. The furopyrazine scaffold was further functionalized with an amino- and a carboxy-terminus resulting in a conformationally restricted dipeptidomimetic scaffold. The carboxy-terminus was introduced via a chemoselective vinylation of the 7-position followed by oxidative cleavage, while the amino-terminus was obtained via Buchwald–Hartwig amidation of the 2-position of the scaffold. The versatility of the synthetic method was demonstrated by the synthesis of a small library of diversely substituted furopyrazines having various amino acid side chains on the four points of diversity. Evaluation with an X-ray structure of the scaffold and computational analysis supports the exploitation of the furopyrazine scaffold as a restricted dipeptide mimic, which can mimic the two central residues of a β-turn.     

CH(A2Delta) Formation in hydrocarbon combustion: the temperature dependence of the rate constant of the reaction C2H + O2--> CH(A2Delta) + CO2

The temperature dependence of the rate constant of the chemiluminescence reaction C2H + O2 --> CH(A) + CO2, k1e, has been experimentally determined over the temperature range 316-837 K using pulsed laser photolysis techniques. The rate constant was found to have a pronounced positive temperature dependence given by k1e(T) = AT(4.4) exp(1150 +/- 150/T), where A = 1 x 10(-27) cm(3) s(-1). The preexponential factor for k1e, A, which is known only to within an order of magnitude, is based on a revised expression for the rate constant for the C2H + O(3P) --> CH(A) + CO reaction, k2b, of (1.0 +/- 0.5) x 10(-11) exp(-230 K/T) cm3 s(-1) [Devriendt, K.; Van Look, H.; Ceursters, B.; Peeters, J. Chem. Phys. Lett. 1996, 261, 450] and a k2b/k1e determination of this work of 1200 +/- 500 at 295 K. Using the temperature dependence of the rate constant k1e(T)/k1e(300 K), which is much more accurately and precisely determined than is A, we predict an increase in k(1e) of a factor 60 +/- 16 between 300 and 1500 K. The ratio of rate constants k2b/k1e is predicted to change from 1200 +/- 500 at 295 K to 40 +/- 25 at 1500 K. These results suggest that the reaction C2H + O2 --> CH(A) + CO2 contributes significantly to CH(A-->X) chemiluminescence in hot flames and especially under fuel-lean conditions where it probably dominates the reaction C2H + O(3P) --> CH(A) + CO.     

Study of the deformation characteristics of window security film by digital image correlation techniques

This paper presents a speckle-displacement measurement technique based on the digital image correlation to study the notch sensitivity and crack bridging of window security film. It is used to protect existing glazing against hurricanes, blast and terrorist explosions. The window security film is laminated to the interior side of the glass window by means of a special adhesive. When the glass is breaking, the window film keeps all glass fragments together.The proposed sub-pixel registration of the displacement field is achieved using a calculation technique based on the centre of mass localization of the complex spectrum. This approach increases the computational efficiency for displacements smaller than one pixel and performs with high precision when optimal values of the input correlation parameters are used. In order to achieve a high accuracy of the algorithm, optimization of these input image correlation parameters is offered. For larger displacements an iterative procedure which preserves the precision is successfully implemented.The speckle pattern is created by small white dots sprayed on the previously black painted film surface. As a result, white light illumination can be used which significantly simplifies the experiments.     

Influence of the Position of the Connecting Spacer of the Chromophore on the Nonlinear Optical Response

A new chromophore, C1 , based on a similar DπA‐structure as in the FTC ‐chromophore but with a hydroxyalkyl spacer perpendicular to the direction of the dipole moment was synthesized. Both chromophores and the CLD ‐chromophore were used to prepare high T_g nonlinear optical vinyl polymers. The influence of the position of the spacer on the DπA‐system on the NLO response of the resulting polymers was investigated.

     

Rare-earth quinolinates: infrared-emitting molecular materials with a rich structural chemistry

Near-infrared-emitting rare-earth chelates based on 8-hydroxyquinoline have appeared frequently in recent literature, because they are promising candidates for active components in near-infrared-luminescent optical devices, such as optical amplifiers, organic light-emitting diodes, .... Unfortunately, the absence of a full structural investigation of these rare-earth quinolinates is hampering the further development of rare-earth quinolinate based materials, because the luminescence output cannot be related to the structural properties. After an elaborate structural elucidation of the rare-earth quinolinate chemistry we can conclude that basically three types of structures can be formed, depending on the reaction conditions: tris complexes, corresponding to a 1:3 metal-to-ligand ratio, tetrakis complexes, corresponding to a 1:4 metal-to-ligand ratio, and trimeric complexes, with a 3:8 metal-to-ligand ratio. The intensity of the emitted near-infrared luminescence of the erbium(III) complexes is highest for the tetrakis complexes of the dihalogenated 8-hydroxyquinolinates.     

A new approach for quantitative risk analysis

Project risk management aims to provide insight into the risk profile of a project as to facilitate decision makers to mitigate the impact of risks on project objectives such as budget and time. A popular approach to determine where to focus mitigation efforts, is the use of so-called ranking indices (e.g., the criticality index, the significance index etc.). Ranking indices allow the ranking of project activities (or risks) based on the impact they have on project objectives. A distinction needs to be made between activity-based ranking indices (those that rank activities) and risk-driven ranking indices (those that rank risks). Because different ranking indices result in different rankings of activities and risks, one might wonder which ranking index is best. In this article, we provide an answer to this question. Our contribution is threefold: (1) we set up a large computational experiment to assess the efficiency of ranking indices in the mitigation of risks, (2) we develop two new ranking indices that outperform existing ranking indices and (3) we show that a risk-driven approach is more effective than an activity-based approach.     

Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring

Layerwise Laser Melting (LLM) is a layerwise production technique enabling the production of complex metallic parts. In the process a thin layer of powder is first deposited on a base plate. With the energy of a scanning laser beam this layer is melted at selected places, according to a predefined scanning pattern. After scanning, a new layer of powder is deposited on top of the previous layer and selectively melted. This sequence of depositing and scanning is repeated until the complete part is built. The local geometry surrounding the melt pool has a large influence on the processing behavior. For process control issues, this influence must be known and quantified, in order to determine a priori optimal processing conditions and to interpret measured melt pool radiation. In order to study the melt pool behavior, optical process monitoring of LLM has been applied using a high speed near-infrared CMOS camera and a large area silicon photodiode sensor. Data processing rates up to 10 kHz and real-time process monitoring are achieved using image and signal processing on a Field Programmable Gate Array (FPGA). Several case studies will be presented showing that the geometric influencing factors can be studied and quantified by analyzing the melt pool sensor output.