Spectrophotometric determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol

A spectrophotometric method for determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol (TAC) is described. The interferences of foreign ions can be eliminated by masking with a mixture of sodium tartrate and sodium thiosulphate. The nickel-TAC complex has low solubility in water, but is soluble in aqueous ethanol. Beer's law is obeyed for 20-70mug of nickel in 50 ml of solution, at pH 5.7. The molar absorptivity at 580 nm is 2.6 x 10(4)l.mole(-1).cm(-1). The method has been applied successfully to determination of nickel in reference samples.     

Comprehensive photochemistry and photophysics of land- and marine-based beta-carbolines employing time-resolved emission and flash transient spectroscopy

The photophysical and photochemical behavior of Norharmane (Norh), Harmane (Hara) and Harmine (Hari) and their cations have been examined as a function of the nature of the solvent. Time-resolved emission in nonprotic polar solvents showed fluorescence for all and also phosphorescence for Hari. All emissions were assigned as those of the neutral molecules. Norh and Hari showed fluorescence of both the neutral and the cation in methanol as well as phosphorescence of the neutral while Hari also had fluorescence of the zwitter ion. In ethanol, Norh and Hari displayed fluorescence and phosphorescence of the neutral. The ground-state cations of Norh and Hari exhibited fluorescences of the cation and Hari also had a phosphorescence (cation). The flash transient spectra in nonprotic solvents of all three carbolines had long-lived triplet transients only of the neutral. Triplet and singlet oxygen yields were quite high, 0.31-0.40. Direct excitation of any of the cations gave only the cation triplet. The triplet yields of the cations appear to be low (0.01-0.10 range). Theoretical calculations were done relative to location of triplet states. Some new information will be reported on other naturally occurring differently substituted marine-based beta-carbolines. The impact of all of the foregoing observations on the photosensitizing potential of all compounds is discussed.     

Adsorptive stripping voltammetric behaviour of copper complexes of some heterocyclic azo compounds

Controlled adsorptive accumulation of copper complexed with TAN, TAC, TAR and TAM (heterocyclic azo-compounds) on a static mercury drop electrode provides the basis for the direct stripping measurement of this element in the nanomolar concentration level. The ligand TAN exhibited great sensitivity and better separation of the peak current of the ligand in relation to the complex. The reduction current of adsorbed complex ions of copper is measured by linear scan cathodic stripping voltammetry, preceded by a period of accumulation of a few minutes. The peak potential is at approximately -0.37 V vs. Ag/AgCl. Optimal experimental parameters were found to be a TAN concentration of 1 x 10(-5)M, an accumulation potential of -0.22 V, and a solution pH of 3.7 (acetate buffer). The detection limit is 0.8nM after a 5-min accumulation with a stirred solution, and the response is linear up to 50 mug/l. Many common cations and anions do not interfere in the determination of copper. The interference of titanium is eliminated by addition of fluoride ion. Results are reported for a fresh water sample.     

Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review

The first publication on the use of polyurethane foam (PUF) for sorption processes dates back to 1970, and soon after the material was applied for separation processes. The application of PUF as a sorbent for solid phase extraction of inorganic analytes for separation and pre-concentration purposes is reviewed. The physical and chemical characteristics of PUF (polyether and polyester type) are discussed and an introduction to the characterization of these sorption processes using different types of isotherms is given. Separation and pre-concentration methods using unloaded and loaded PUF in batch and on-line procedures with continuous flow and flow injection systems are presented. Methods for the direct solid sampling analysis of the PUF after pre-concentration are discussed as well as approaches for speciation analysis. Thermodynamic proprieties of some extraction processes are evaluated and the interpretation of determined parameters, such as enthalpy, entropy and Gibbs free energy in light of the physico-chemical processes is explained.     

Quantification of total chromium and hexavalent chromium in UHT milk by ETAAS

Procedures for the quantification of total chromium and hexavalent chromium in UHT milk samples are presented. Total chromium was determined directly in milk with the addition of a surfactant and a mixture of Pd and Mg as a chemical modifier. For the selective separation of hexavalent chromium, the sample pre-treatment consisted in precipitation of proteins and elution of the supernatant through a Chromabond NH2 column. The metal was eluted with nitric acid. Both total chromium and hexavalent chromium were evaluated by atomic absorption spectrometry with electrothermal atomization using the same instrumental conditions. The detection limits were 0.2 and 0.15 microgram l-1 for total chromium and hexavalent chromium, respectively. The linearity ranges under the optimized conditions were 0.2-20 and 0.15-50 micrograms l-1. For total chromium the precision was 4.9 and 5.7% for the analytical and the over-all procedure, respectively, and for hexavalent chromium 4.3 and 4.9%, respectively. The validation of both procedures was performed by the standard additions method and the recoveries were higher than 93% in all cases. For total chromium, a certified reference material was also used to validate the methodology. The methods were applied to the determination of total chromium and hexavalent chromium in 60 UHT milk samples.     

Novel microporous lanthanide silicates with tobermorite-like structure

The synthesis and structural characterization of microporous lanthanide silicates (Na(1.08)K(0.5)Ln(1.14)Si(3)O(8.5).1.78H(2)O, Ln = Eu, Tb, Sm, Ce) are reported. The structure of these solids is closely related with the structure of hydrated calcium silicate minerals known as tobermorites and was solved by powder X-ray diffraction ab initio (direct) methods and further characterized by chemical analysis, thermogravimetry, scanning electron microscopy, (23)Na and (29)Si MAS NMR and luminescence spectroscopy. These materials combine microporosity with interesting photoluminescence properties, and their structural flexibility allows fine-tuning of luminescence properties, by introducing a second type of lanthanide ion in the framework. Thus, they may find applications in new types of sensors.     

Oligomeric proanthocyanidins: naturally occurring O-heterocycles

This review covers the flavan-3-ols (catechins), flavan-4-ols/flavan-3,4-diols (leucoanthocyanidins), A-type proanthocyanidins, B-type proanthocyanidins including the procyanidins, prodelphinidins, propelargonidins, proteracacinidins, promelacacinidins, procassinidins, probutinidins, and non-proanthocyanidins with flavan-3-ol constituent units. Newly isolated proanthocyanidins, structure elucidation, syntheses, HPLC/MS analysis, NMR/ conformational analysis, and the effects of proanthocyanidins on human nutrition and health are reported. The literature from January 1999 to December 2001 is reviewed, and 130 references are cited.     

Insertion of iron oxide in calciumsilicate gel-derived materials

Samples of the composition of 10Fe₂O₃·10CaO·80SiO₂ were prepared by the sol-gel method and heat-treated in different atmospheres. They were investigated by X-ray diffraction, scanning electron microscopy and Mössbauer spectroscopy. In the heat-treated samples in air iron is present up to 1000 °C in form of hematite and as Fe³⁺ in the tetrahedral sites. A wide range of hematite particle sizes was observed, the average size increased with heating temperature. At 1000 °C wollastonite was observed, at 1200 °C tridymite was formed and all the iron was incorporated in hematite. A heat-treatment at 500 °C under reducing conditions led to poorly crystallized maghemite and at 700 °C to metallic iron and fayalite formation.