Quantitative determination of sotolon, maltol and free furaneol in wine by solid-phase extraction and gas chromatography-ion-trap mass spectrometry

A method for the analytical determination of sotolon [4,5-dimethyl-3-hydroxy-2(5H)-furanone], maltol [3-hydroxy-2-methyl-4H-pyran-4-one] and free furaneol [2,5-dimethyl-4-hydroxy-3(2H)-furanone] in wine has been developed. The analytes are extracted from 50 ml of wine in a solid-phase extraction cartridge filled with 800 mg of LiChrolut EN resins. Interferences are removed with 15 ml of a pentane-dichloromethane (20:1) solution, and analytes are recovered with 6 ml of dichloromethane. The extract is concentrated up to 0.1 ml and analyzed by GC-ion trap MS. Maltol and sotolon were determined by selected ion storage of ions in the m/z ranges 120-153 and 79-95, using the ions m/z 126 and 83 for quantitation, respectively. Furaneol was determined by non-resonant fragmentation of the m/z 128 mother ion and subsequent analysis of the m/z 81 ion. The detection limits of the method are in all cases between 0.5 and 1 microg l(-1), well below the olfactory thresholds of the compounds. The precision of the method is in the 4-5% range for levels in wine around 20 microg l(-1). Linearity holds at least up to 400 microg l(-1), and is satisfactory in all cases. The recoveries of maltol and sotolon are constant (70 and 64%, respectively) and do not depend on the type of wine. On the contrary, in the case of furaneol, red wines show constant and high recoveries (97%), while the recoveries on white wines range between 30 and 80%. Different experiments showed that this behavior is probably due to the existence of complexes formed between furaneol and sulphur dioxide or catechols. Sensory experiments confirmed that the complexed forms found in white wines are not perceived by orthonasal olfaction, and that the furaneol determined by the method can be considered as the free and odor-active fraction.     

Stereoselective conjugate addition of benzyl phenylsulfonyl carbanions to enoates derived from d-mannitol

The conjugate addition of benzylic phenylsulfonyl carbanions (2a'-d') to enoates derived from d-(+)-mannitol (E- or Z-1a-c) was studied using THF and THF/HMPA as solvent. Under kinetic conditions (-78 degrees C), enoate E-1a,b led to a mixture of syn-(R,S) and anti-(S,S) adducts (55/45), and syn-(R,S) adducts were the main product obtained ( approximately 90/10) from enoate Z-1a. Under thermodynamic conditions (-78 degrees C to room temperature) syn-(R,S) adducts were also preferentially formed ( approximately 90/10), despite the geometry at the double bond in the acceptor. Enoate 1c (E/Z = 57/43), bearing an additional benzyl group at the alpha-position, also reacted with carbanions 2'a,b, under thermodynamic conditions, leading to syn-adducts in excellent de (control at the three newly generated stereogenic centers). The adducts were quantitatively transformed into the corresponding beta-gamma-disubstituted gamma-butyrolactones and alpha,beta,gamma-trisubstituted gamma-butyrolactones. (1)H NMR studies (NOE and J-coupling) of these lactones allowed us to determine their configuration at the newly generated chiral centers. The reduction of the C-S bond in adducts syn-(R,S) with Na/Hg, followed by treatment of the resulting products in aqueous acid media, led to enantioenriched beta-benzyl-gamma-hydroxymethyl-gamma-butyrolactones. The conformational equilibrium of enoates E- and Z-1b was evaluated by theoretical calculations (ab initio, MP2/6-31G), and a mechanistic rationale was proposed to explain the observed stereoselectivities.     

Alkaline hydrolysis of diaryl ditellurides under phase transfer conditions; synthesis of alkyl aryl tellurides

The disproportionation reaction of diaryl ditellurides [(C₆H₅Te)₂, (p-CH₃C₆H₄Te)₂, (p-CH₃OC₆H₄Te)₂, (p-C₂H₅OC₄Te)₂, (2-naphthyl-Te)₂] with sodium hydroxide under phase transfer conditions at room temperature is described for the first time. The phase transfer catalyst used is 2HT-75, a trade name for a mixture of dialkyldimethylammonium chlorides. The intermediates aryl tellurolates react “in situ” with alkyl halides to give the corresponding alkyl aryl tellurides (ArTeR) in 52–72% yield. The following compounds were prepared: Ar  C₆H₅, R=CH₃(CH₂)₃CH₂, (CH₃)₂CHCH₂CH₂, (CH₃)₂CHCH₂, CH₃CHBrCH₂CH₂, CH₃(CH₂)₈CH₂, C₆H₅CH₂, ClCH₂, C₆H₅CH₂CH₂, CH₂CHCH₂, C₆H₅CHCHCH₂, C₆H₅SeCH₂, $\text{CH}{}_2\text{CH}{}_2\text{CH}{}_2\text{CHCHC}$H; Ar=p-CH₃C₆H₄, R = CH₃(CH₂)₂CH₂; Ar=p-CH₃OC₆H₄, R = CH₃(CH₂)₂CH₂; Ar = p-CH₂H₅OC₆H₄, R= CH₃(CH₂)₂CH₂; Ar = 2-naphthyl, R = CH₃(CH42)₂CH₂.     

Molecular volume calculation using AM1 semi-empirical method toward diffusion coefficients and electrophoretic mobility estimates in aqueous solution

Diffusion coefficients and electrophoretic mobility are two important physicochemical parameters used in mass transport phenomenon studies. The volume of the solute is required to determine or estimate these parameters. Classical methods, such as the LeBas method are commonly used. However, although valid, this method may represent a boring and time-consuming task, depending on the nature and number of compounds to be calculated. In this study, the volumes of a series of neutral and charged substances of the main functional groups present in organic molecules, amino acids, drugs and diverse compounds, such as cytosine and glucose, were calculated according to the LeBas method (V_M) and the AM1 semi-empirical method, V_W(AM1). The latter showed to be statistically coincident with the former. Employed as a pure value or corrected by the LeBas molar volume, the AM1 molecular volume was also demonstrated to estimate the diffusion coefficients in infinite aqueous dilution within an acceptable average error, according to the Othmer–Thakar, Wilke–Chang and Hayduk–Laudie methods, as well as the electrophoretic mobility of charged substances, such as carboxylates and protonated amines. According to these results, the AM1 method was seen to be statistically valid to calculate molecular volume. Many advantages in the construction of most diverse structures were noted, as well as a reduction in time and an increase in the quality of the information, when run on molecular modeling software.     

EPR spectroscopy on irradiated nickel tetracyanide in NaCl host lattice: mechanism for the simultaneous formation of reduced and oxidized species

The kinetics of oxidized and reduced Ni²⁺ complexes produced by X-ray irradiation on single crystals of NaCl doped with [Ni(CN)₄]²⁻ is studied by Electron Paramagnetic Resonance at room temperature. The interdependent generation of these two complexes is attributed to migration of the charge compensating vacancy from the reduced to the oxidized complex in a reversible reaction. At higher X-ray doses, there is a predominant formation of the reduced complex.     

Flow injection determination of cobalt after its sorption onto polyurethane foam loaded with 2-(2-thiazolylazo)-p-cresol (TAC)

An electrochemically stable monolayer of tris(2,2'-bipyridyl)ruthenium(II) was obtained for the first time. It was based on the electrostatic attachment of Ru(bpy)(3)(2+) to the benzene sulfonic acid monolayer film, which was covalently bound onto glassy carbon electrode by the electrochemical reduction of diazobenzene sulfonic acid. The surface-confined Ru(bpy)(3)(2+) underwent reversible surface process, and reacted with the coreactant, tripropylamine, to produce electrochemiluminescence. In view of the stability of the electrode, the results strongly suggested that light was emitted from the surface-confined Ru(bpy)(3)(2+), not from the detached Ru(bpy)(3)(2+). The Ru(bpy)(3)(2+) modified electrode was used to the determination of tripropylamine. It showed good linearity in the concentration range from 5 muM to 1 mM with a detection limit of 1 muM (S/N=4). The good stability of the Ru(bpy)(3)(2+) modified electrode also showed that the benzene sulfonic acid monolayer film prepared can be served as an excellent support to construct multilayers.     

Molybdenum determination in iron matrices by ICP-AES after separation and preconcentration using polyurethane foam

A procedure is proposed for the separation and determination of molybdenum in iron matrices by a batch process. It is based on the solid-phase extraction of the molybdenum(V) ion as thiocyanate complex on polyurethane (PU) foam. The extraction parameters were optimized. Using 0.20 mol L-1 hydrochloric acid, a thiocyanate concentration of 0.10 mol L-1, 100 mg of polyurethane foam and shaking time of 10 min, molybdenum (5-400 micrograms) can be separated and preconcentrated from large amounts of iron (10 mg). Desorption was carried out instantaneously by conc. nitric acid or acetone. Distribution coefficients, sorption capacity of the PU foam and coefficients of variation were also evaluated. The effect of some ions on the separation procedure was assessed. Iron(III) should be reduced to iron(II). The proposed procedure was used to determine molybdenum in standard iron matrices such as steel and pure iron. The achieved results did not show significant differences with certified values.     

Aggregation effects on evaporation and the air/water interface of dodecyltrimethylammonium hydroxide solutions

 The system dodecyltrimethylammonium hydroxide (DTAOH)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. Results confirmed earlier conclusions about a stepwise aggregation mechanism in DTAOH solutions. The aggregation process started at a total concentration C _T=(2.51±0.10)×10^-4 mol dm^-3) which probably corresponds to the formation of dimers. At C _T= (1.300±0.041)×10^-3 mol dm^-3 there was a change in the surface and evaporation behavior, corresponding to the formation of small, fully ionized aggregates which grew with increasing concentration. At C _T= (1.108±0.010)×10^-2 mol dm^-3 the formation of true micelles with hydroxide counterions in the Stern layer did not change significantly the evaporation and adsorption behavior. This means that between this concentration and C _T=(3.02±0.28)× M28.8n10^-2 mol dm^-3, the changes in structure were gradual. At the latter concentration there was a sudden change in the monolayer state at the air/water interface, with a strong surfactant desorption, and a major change in evaporation behavior. The changes are compatible with the formation of few, large aggregates reducing the total concentration of kinetically independent solute units, which in turn increased the activity of the solvent. This phenomenon is in agreement with literature information. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by colligative effects. The reduction of the effective area available for evaporation had only a slight effect in water evaporation. Received: 9 January 1997 Accepted: 19 October 1997     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.