Effects of diclofenac on EPC liposome membrane properties

In this work the interaction of a non-steroidal anti-inflammatory drug (NSAID), diclofenac, with egg yolk phosphatidylcoline (EPC) liposomes, used as cell-membrane models, was quantified by determination of the partition coefficient. The liposome/aqueous phase partition coefficient was determined by derivative spectrophotometry, fluorescence quenching, and measurement of zeta-potential. Theoretical models based on simple partition of the diclofenac between two different media, were used to fit the experimental data, enabling the determination of K_p. The three techniques used yielded similar results. The effects of the interaction on the membranes characteristics were further evaluated, either by studying membrane potential changes or by effects on membrane fluidity. The liposome membrane potential and the size and size-homogeneity of liposomes were measured by light scattering. The effects of diclofenac on the internal viscosity or fluidity of the membrane were determined by use of spectroscopic probes—a series of n-(9-anthroyloxy) fatty acids in which the carboxyl terminal group is located at the interfacial region of the membrane and the fluorescent anthracene group is attached at different positions along the fatty acid chain. The location of the diclofenac on the membrane was also evaluated, by fluorescence quenching using the same series of fluorescent probes. Because the fluorescent anthracene group is attached at different positions along the fatty acid chain, it is possible to label at a graded series of depths in the bilayer. The interactions between the drug and the probe are a means of predicting the location of the drug on the membrane.     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.     

Solvent dependent conformational isomerism and ligand oxidation of novel Ru(II) cyclen complexes

The synthesis of cis-[Ru(II)(cyclen)(L)(x)](n+) (cyclen = 1,4,7,10-tetraazacyclododecane and L = 2,2'-bipyridine (bpy), phenanthroline (phen) or 4-cyanopyridinium (4-NCpyH(+))) is reported. The freshly prepared complexes are stable in aprotic solvents and cyclen undergoes oxidative dehydrogenation reaction at high pH. These compounds also present solvent dependent conformational isomerization.     

Calorimetric study of the reactions of n-alkylphosphonic acids with metal oxide surfaces

The reaction enthalpies for the solution-phase self-assembly of n-alkylphosphonic acids on the surfaces of TiO2 and ZrO2 have been determined using isothermal titration calorimetry at 298 K. The reaction enthalpies were negative (exothermic) for methyl- and n-octylphosphonic acids and positive (endothermic) for n-octadecylphosphonic acid with both metal oxides. The enthalpy/energy analysis showed that the net enthalpy of the formation of self-assembled monolayers (SAMs) at solid-liquid interface can be presented as follows: DeltaHr=-D-(DeltaHsol+DeltaHdil)-(ES-ESAM), where D is the binding energy of the SAM molecules with the solid; DeltaHsol and DeltaHdil are the enthalpies of dissolution and dilution; ES and ESAM are the surface energies of bare solid and SAM, respectively. This equation predicted an increase (and the sign change) of the reaction enthalpy as the alkyl group in n-alkylphosphonic acid increased, which explained the experimental data. Using this equation, the binding energy (D) in the SAMs of n-octyl- and n-octadecylphosphonic acids were estimated: 55+/-5 kJ/mol (for ZrO2) and 58+/-7 kJ/mol (for TiO2).     

A thieno-2H-chromene alpha-amino acid derivative: synthesis and photochromic properties

[structure: see text] A new photochromic thieno-2H-chromene alpha-amino acid derivative was prepared by C-N palladium-catalyzed cross-coupling of a bromothieno-2H-chromene with the aminated aromatic side chain of the methyl ester of a N,N-diprotected amino acid. Its good photochromic properties demonstrated by flash photolysis and continuous irradiation indicate a possible application in ophthalmic lenses. It may also be inserted into peptides to give photoinduced reversible structural changes.     

Liquid chromatography-diode array detection-electrospray ionisation mass spectrometry/nuclear magnetic resonance analyses of the anti-hyperglycemic flavonoid extract of Genista tenera. Structure elucidation of a flavonoid-C-glycoside

The anti-hyperglycemic flavonoid extract obtained from Genista tenera was first studied by liquid chromatography (LC)-diode array detection (DAD) which showed the presence of two major compounds. One of them was identified as genistein-7-O-glucoside. Luteolin-7-O-glucoside was detected as a minor constituent, while luteolin-7,3'-di-O-glucoside and rutin were found in trace amounts. LC-DAD-ESI-MS and NMR were used to confirm the structure of these compounds and allowed the elucidation of the structure of the unknown major compound, which is the flavonoid 5,7,4'-trihydroxyisoflavone-8-C-glucoside.     

Highly selective solid-phase extraction and large volume injection for the robust gas chromatography-mass spectrometric analysis of TCA and TBA in wines

A reliable solid-phase extraction (SPE) method for the simultaneous determination of 2,4,6-trichloroanisole (TCA) and 2,4,6-tribromoanisole (TBA) in wines has been developed. In the proposed procedure 50 mL of wine are extracted in a 1 mL cartridge filled with 50 mg of LiChrolut EN resins. Most wine volatiles are washed up with 12.5 mL of a water:methanol solution (70%, v/v) containing 1% of NaHCO3. Analytes are further eluted with 0.6 mL of dichloromethane. A 40 microL aliquot of this extract is directly injected into a PTV injector operated in the solvent split mode, and analysed by gas chromatography (GC)-ion trap mass spectrometry using the selected ion storage mode. The solid-phase extraction, including sample volume and rinsing and elution solvents, and the large volume GC injection have been carefully evaluated and optimized. The resulting method is precise (RSD (%) < 6% at 100 ng L(-1)), sensitive (LOD were 0.2 and 0.4 ng/L for TCA and TBA, respectively), robust (the absolute recoveries of both analytes are higher than 80% and consistent wine to wine) and friendly to the GC-MS system (the extract is clean, simple and free from non-volatiles).     

A chitosan-templated monolithic siliceous mesoporous-macroporous material

 We synthesised a porous siliceous material via hydrothermal hydrolysis of sodium silicate, using chitosan as a template. As far as we know, this is the first synthesis of siliceous porous material using chitosan as a template in a hydrothermal way. A fibrous material was obtained, whose macroscopic fibres were formed by a spongelike siliceous network with pores having a radius of 0.57 μm. The siliceous walls of the pores were, in turn, of the form of a microporous–mesoporous material; the pore radius distribution was polymodal with maxima at 0.84, 1.0, 1.2 and 1.5 nm and a broad band between 3 and 10 nm. This structure may be due to the aggregation of the hydrated chitosan helices in bundles of parallel fibres with different size and the gelation of the system. The aggregation process might be induced by the addition of silicate. Received: 12 January 2000/Accepted: 7 March 2000     

Time and temperature induced phase transformation in L‐isoleucine hydrochloride monohydrated crystal

Semi organic crystals have been intensively studied aiming applications in nonlinear optical (NLO). Such applicability requires crystals with both high quality and thermal stability, which make the full characterization of this material a topic issue. In this paper, single crystals of L‐isoleucine hydrochloride monohydrated (L‐Ile.H2O.HCl) was synthesized by slow evaporation technique and characterized by thermal analysis and X‐ray diffraction (XRD) measurements. XRD results at 298 K showed that the sample crystallize with the orthorhombic structure, and the lattice parameters obtained by Rietveld refinement were a = 5.873(3) Å, b = 24.814(4) Å, and c = 6.873(5) Å. Thermal analysis measurements shows four decomposition stages between 328 ‐480 K which were associated with loss of water by desolvation, loss crystallization water and decomposition of L‐Ile.HCl. XRD measurements as a function of temperature up to 428 K show an irreversible phase transformation. This transformation was obtained after 32 hours keeping the L‐Ile.HCl.H2O sample at 413 K. The analysis shows that phase transformation occurs due to water and chlorine losses without destroy the amino acid carbon chain and in the end of transformation only the precursor amino acid remains. L‐Ile.HCl.H2O present low thermal stability and the phase transformation is time and temperature dependent.     

Computational performance and cross‐validation error precision of five PLS algorithms using designed and real data sets

An evaluation of computational performance and precision regarding the cross‐validation error of five partial least squares (PLS) algorithms (NIPALS, modified NIPALS, Kernel, SIMPLS and bidiagonal PLS), available and widely used in the literature, is presented. When dealing with large data sets, computational time is an important issue, mainly in cross‐validation and variable selection. In the present paper, the PLS algorithms are compared in terms of the run time and the relative error in the precision obtained when performing leave‐one‐out cross‐validation using simulated and real data sets. The simulated data sets were investigated through factorial and Latin square experimental designs. The evaluations were based on the number of rows, the number of columns and the number of latent variables. With respect to their performance, the results for both simulated and real data sets have shown that the differences in run time are statistically different. PLS bidiagonal is the fastest algorithm, followed by Kernel and SIMPLS. Regarding cross‐validation error, all algorithms showed similar results. However, in some situations as, for example, when many latent variables were in question, discrepancies were observed, especially with respect to SIMPLS. Copyright © 2010 John Wiley & Sons, Ltd.