Electronics with and on paper

Today there is a strong interest in the scientific and industrial community concerning the use of biopolymers for electronic applications, driven mainly by low‐cost and disposable applications. Adding to this interest, we must recognise the importance of the dream of wireless auto‐sustained and low‐energy‐consumption electronics. This dream can be fulfilled by cellulose paper, the lightest and the cheapest known substrate material, as well as the Earth's major biopolymer and of tremendous global economic importance. Most of the paper used up to now is optimised in terms of the required mechanical and physical properties to be used as the support of inks of different origins. In the future, specific electronic heterogeneous paper sheets should be fabricated aiming to get paper fibers with required bulk and surface functionalities, proper water/vapour barrier, size and diameter/thickness of the fibrils and full paper thickness. This will be the function of components/devices to be incorporated/integrated such as thin‐film transistors, complementary metal oxide semiconductor devices, passive electronic components (resistances, inductors and capacitors), memory transistors, electrochromics and thin‐film paper batteries. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical properties of in situ doped and undoped titania nanocatalysts and doped titania sol-gel nanofilms

In this paper we present spectroscopic properties of doped and undoped titanium dioxide (TiO₂) as nanofilms prepared by the sol-gel process with rhodamine 6G doping and studied by photoacoustic absorption, excitation and emission spectroscopy. The absorption spectra of TiO₂ thin films doped with rhodamine 6G at very low concentration during their preparation show two absorption bands, one at 2.3 eV attributed to molecular dimmer formation, which is responsible for the fluorescence quenching of the sample and the other at 3.0 eV attributed to TiO₂ absorption, which subsequently yields a strong emission band at 600 nm. The electronic band structure and optical properties of the rutile phase of TiO₂ are calculated employing a fully relativistic, full-potential, linearized, augmented plane-wave (FPLAPW) method within the local density approximation (LDA). Comparison of this calculation with experimental data for TiO₂ films prepared for undoped sol-gels and by sputtering is performed.     

Study of the structural, dielectric and magnetic properties of Bi2O3 and PbO addition on BiFeO3 ceramic matrix

In this paper we studied the effects of Bi₂O₃ and PbO addition on BiFeO₃ (BFO) ceramic matrix. The structural, dielectric and magnetic properties of fifteen BFO samples were discussed in view of possible applications in RF and microwave devices. The present work also reports the preparation of the samples. Polyvinyl alcohol (PVA) and tetraethyl orthosilicate (TEOS) were also added as a binder in the fabrication procedure. The samples have been studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and magnetic hysteresis measurements. Further, a study based on impedance spectroscopy also has been done. Dielectric permittivity (ε′) and dielectric loss (tan δ) were measured at room temperature in the frequency range 100 Hz-10 MHz, as well as a.c. conductivity. The -Im[Z(f)] versus Re[Z(f)] plot has been obtained. The samples were investigated in view of possible applications like miniaturized filters, diplexers and dielectric resonator antennas (DRA). In the RF and MW frequency region, the application of magneto-dielectric and multiferroic perovskite composite materials is desirable for the miniaturization of components.     

Structure,thermal properties,conductivity and electrochemical stability of di-urethanesil hybrids doped with LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

Variable chain length di-urethane cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks were prepared by application of a sol-gel strategy. These materials, designated as di-urethanesils (represented as d-Ut(Y′), where Y′ indicates the average molecular weight of the polymer segment), were doped with lithium triflate (LiCF₃SO₃). The two host hybrid matrices used, d-Ut(300) and d-Ut(600), incorporate POE chains with approximately 6 and 13 (OCH₂CH₂) repeat units, respectively. All the samples studied, with compositions ∞ > n ≥ 1 (where n is the molar ratio of (OCH₂CH₂) repeat units per Li⁺), are entirely amorphous. The di-urethanesils are thermally stable up to at least 200 °C. At room temperature the conductivity maxima of the d-Ut(300)- and d-Ut(600)-based di-urethanesil families are located at n = 1 (approximately 2.0 × 10⁻⁶ and 7.4 × 10⁻⁵ Scm⁻¹, respectively). At about 100 °C, both these samples also exhibit the highest conductivity of the two electrolyte systems (approximately 1.6 × 10⁻⁴ and 1.0 × 10⁻³ Scm⁻¹, respectively). The d-Ut(600)-based xerogel with n = 1 displays excellent redox stability.     

Critical Evaluation of Analytical Procedures for the Determination of Lead in Seawater

Abstract: This article presents a critical evaluation of the analytical procedures used for the determination of lead in seawater, which is important because lead is a good indicator of marine pollution caused by human activities. Sampling, storage, and pretreatment techniques are briefly overviewed, including the significance of systematic errors that cannot be corrected later on. The main techniques in this article are electrothermal–atomic absorption spectrometry (ET-AAS), inductively coupled plasma–mass spectrometry (ICP-MS), and voltammetry. Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma–optical emission spectrometry (ICP-OES) are treated as well, although their limits of quantification are not sufficient for a determination of lead in unpolluted seawater. Even when separation and preconcentration techniques are applied, these techniques are only capable of detecting lead in polluted coastal seawater. Separation and preconcentration are actually also required for ET-AAS and ICP-MS in order to determine the lowest concentrations of lead found in unpolluted open-ocean seawater, which is still a challenge for the analytical chemist.     

Preparation and characterization of microcapsules loaded with polyphenols-enriched Uncaria tomentosa extract using spray-dryer technique

Journal of Thermal Analysis and Calorimetry - This work prepared and characterized microcapsule of Uncaria tomentosa (UT) in order to standardize a spray-dryer Uncaria tomentosa extract. The UT...     

Thermal investigation on polymorphism in sodium saccharine

The thermal behavior of sodium saccharin polymorphic forms was investigated using thermogravimetry and differential scanning calorimetry, while structural changes during the dehydration processes were monitored by X-ray powder diffraction. In solid state, sodium saccharine may exhibit three forms: anhydrate, 2/3 hydrate (triclinic), and 15/8 hydrate (monoclinic) ones. In this investigation, it was established that monoclinic and triclinic forms compose an entantiotropically related polymorphs system. At 82 °C, the 15/8 hydrated monoclinic form is converted to 2/3 hydrated triclinic form, which showed to be the more thermodynamically stable form at room temperature. Spontaneous solidification leads to the formation of triclinic cell setting, and additionally, spontaneous hydration of the anhydrous form leads to formation of 2/3 hydrated triclinic form.     

Lamellar mono-amidosil hybrids doped with Rhodamine (B) methyl ester perchlorate

Ordered mono-amide cross-linked alkyl/siloxane hybrids (mono-amidosils) incorporating a Rhodamine (B) methyl ester perchlorate dye (Rh(B)CH₃ClO₄) have been synthesized through the sol–gel process and self-directed assembly. The host hybrid matrix m-A(14) is a lamellar bilayer hierarchically structured hybrid composed of short methyl-capped alkyl chains grafted to a siliceous framework through amide groups. At low dye concentration [n = 20, where n is the molar ratio of amide groups per Rh(B)CH₃ClO₄] a new lamellar structure with higher interlamellar distance than that of m-A(14) is formed, whereas at higher dye content (n = 5) this new lamellar structure coexists with that of m-A(14). The efficient encapsulation of Rh(B)CH₃ClO₄ provided by m-A(14) via hydrogen bonding interactions ensured the complete dissolution of the dye and induced a blue shift of the emission of the dye with respect to that of the isolated state, leading to an increase in the quantum yield from values below 0.01 % (measured for the isolated dye) to 4 % at n = 20. The formation of non-fluorescent H-type dimers in the sample with n = 5 accounts for the reduction of the quantum yield. The incorporation of Rh(B)CH₃ClO₄) into m-A(14) was clearly beneficial from the standpoint of the dye’s photostability, allowing to suppress photobleaching during the first 4 h. An intensification of the emission intensity by 50 and 25 % for the emission centered at 600 and 645 nm resulted, respectively, at n = 20.     

Flow-through amperometric methods for detection of the bioactive compound quercetin: performance of glassy carbon and screen-printed carbon electrodes

Journal of Solid State Electrochemistry - Rapid methods using batch injection analysis (BIA) with amperometric detection were developed for the determination of quercetin extracted from the...