Validation of a high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of tetracyclines residues in bovine milk

A high-performance liquid chromatography-fluorescence detection method was optimized and validated to determine tetracyclines residues in bovine milk. Post-column derivatization using metal complexation in non-aqueous reagent increased the fluorescence of chelates by a factor up to 2.54 compared to water (signal-to-noise ratio enhancement). Overall recoveries ranged from 61 to 115%, with RSD_r from 5 to 15% (n = 54). Detection limits ranged from 5 to 35 μg kg⁻¹. Limits of quantification were established at 50 μg kg⁻¹. Decision limits (CCα) were 109, 108 and 124 μg kg⁻¹ and detection capabilities (CCβ) 119, 117 and 161 μg kg⁻¹ for oxytetracycline, tetracycline and chlortetracycline, respectively. The method was applied successfully in a national monitoring program.     

Bicyclic beta-Hydroxytetrahydrofurans as precursors of medium ring keto-lactones

The reaction of a series of cis-fused bicyclic beta-hydroxytetrahydrofurans with ruthenium tetraoxide, generated in situ from ruthenium trichloride and sodium periodate, afforded 9- and 10-membered keto-lactones in moderate to good yields, in a clean and straightforward fashion. The starting beta-hydroxyethers were obtained from the corresponding 3-alkenols by two alternative procedures, depending on their pattern of substitution: (a) epoxidation by dimethyldioxirane, followed by base-catalyzed cyclization of the resulting epoxyalcohol, and (b) thallium trinitrate-mediated cyclization of the 3-alkenols, a method already described by our group.     

求解复杂湍流的非线性涡黏性系数模型和代数应力模型

非线性涡黏性系数模型和代数应力模型联系了线性涡黏性系数湍流模型和完整的微分 雷诺应力模型.随着它们受到日益关注,其形式也越来越多样化.本篇综述的目的是对这些模 型加以总结并比较它们之间的共同点及不同之处,指出它们与完整微分雷诺应力模型之间的 关系,以及相对于线性涡黏性系数模型而言它们在预报流场上所具有的优势.     

Uncertainty in the determination of glucose in aqueous solutions by high‐performance liquid chromatography with evaporative light scattering detection

The determination of glucose and other carbohydrates is the most widespread chemical analysis that is performed within the industries of food, beverage, forage, biomass, pulp and paper, pharmaceuticals among others. Besides that, sugar refineries need to control their products, by‐products and effluents, and furthermore, glucose in the sucrose refining process, is considered an impurity, which shall be controlled. Being HPLC the most currently instrumental technique used for glucose analysis, the evaporative light scattering detector (ELSD) offers advantages (sensitivity, possibility for operating in gradient mode) over the also used refractive index detector. In this work, an HPLC‐ELSD methodology was optimised and validated, aiming the estimate of the uncertainty associated with the results at low levels of concentration of glucose to be measured. Linearity of the response was obtained in the range of glucose concentrations from 20 to 300 mg/L, with an analysis time of 10 min. The global uncertainty was estimated accordingly to the bottom‐up approach used by Eurachem. It was 13% on average for concentrations from 100 to 300 mg/L. For lower concentrations, uncertainty increased significantly up to 30% in the vicinity of the LOD of the method.     

Determination of Pb,Zr, Ti,Sr, Cr,Nb and La in lead zirconate titanate ceramics by particle‐induced X‐ray emission

A particle‐induced X‐ray emission (PIXE) technique has been used in the determination of the principal components Pb, Zr and Ti and the substituting elements Sr, Cr, Nb and La in lead zirconate titanate ceramics. In general, precision of analysis was concentration dependent from each element under study. For Pb, precision varied between 0.13% and 0.16%, at higher concentration of 59.32–64.5%. It was around 6–9% for Sr, Cr and Nb at concentrations of 1% or lower. Particular attention was devoted to the estimation of the analysis trueness. With this purpose, three methods were applied: (1) comparison of PIXE and inductively coupled plasma optical emission spectrometry concentrations, (2) recovery study and (3) comparison with a laboratory standard. Trueness of analysis was around 100 ± 10% for the evaluated elements Pb, Zr, Ti, Sr and Cr. The expected stoichiometry and elemental composition homogeneity of a wide group of produced ceramics were confirmed by the PIXE technique. Copyright © 2012 John Wiley & Sons, Ltd.     

Fusion around the barrier for 7Li+12C

Fusion cross-sections for the ⁷Li + ¹²C reaction have been measured at energies above the Coulomb barrier by the direct detection of evaporation residues. The heavy evaporation residues with energies below 3 MeV could not be separated out from the α-particles in the spectrum and hence their contribution was estimated using statistical model calculations. The present work indicates that suppression of fusion cross-sections due to the breakup of ⁷Li may not be significant for ⁷Li + ¹²C reaction at energies around the barrier.     

Mathematical modeling of controlled-release systems of herbicides using lignins as matrices

The herbicides applied in soils can be easily lost, owing to leaching, volatilization, and bio-and photodegradation. Controlled-release systemsusing polymeric matrices claim to solve these problems. The movement of the herbicides in the soilisalso an important phenomenon to be studied in order to evaluate the loss processes. The development of mathematical models is a relevantrequirement for simulation and optimization of such systems. This study reviews mathematical models as an initial step for modeling data obtained for controlled-release systems of herbicides (diuron, 2,4-dichlorophenoxyacetic acid, and ametryn) using sugarcane bagasse lignin as a polymeric matrix. The release kinetic studies were carried out using several acceptorsystems includinga water bath, soil, and soil-packed columns. Generally, these models take into account phenomena such as unsteady-state mass transfer by diffusion (Fick'slaw) and convection, consumption by several processes, and partitioning processes, resulting in partial differential equations with respect to time and space variables.     

Metal-insulator transition in hydrogen and in expanded alkali metals

Two methods are considered for testing the stability of an electron gas to formation of bound states round a pair of protons. In the first, the screened potential for the two protons is set up as a superposition, which is appropriate in a very high density electron gas. The condition for bound state formation is then examined in the two-centre problem. The density thus obtained is in the right density range to accord with the experiment of Hawke et al. for producing cold metallic hydrogen.This has encouraged us to attempt a more ambitious calculation, namely the investigation of the Heitler-London energy of a model H₂ molecule with screened electron-nuclear and electron-electron interactions, the screening being again through appropriate introduction of the Thomas-Fermi screening radius. The merit of this second model is that the theory contains the Heitler-London value of the dissociation energy of the free H₂ molecule in the limit when the density of the electron gas tends to zero. This feature, the binding energy of the diatomic and its importance in distinguishing the metal-insulator transition in hydrogen from those expected to occur in expanded alkali metals is stressed. The second point we stress is that, in both the models discussed above, there is a close connection with the one-centre criterion for bound state formation. Though we have not carried out detailed two-centre calculations for expanded alkali metals, nevertheless some discussion is given of the one-centre bound state criterion in these metals.Some remarks are also made on the dielectric function of molecular crystals, in relation to the insulator-metal transition.