Heterometallic coordination polymers incorporating dipyrrin based heteroleptic copper and cobalt complexes: to Ag-π or not?

Using ligands based on either an acetylacetonate or a dipyrrin moiety appended with pyridyl groups, a series of novel heteroleptic copper(II) and cobalt(III) complexes combining both chelate units such as (acacpy(2))Cu(dpm-py) and (acacpy(2))Co(dpm-py)(2) (acacpy(2) = 1,3-bis(4-pyridyl)-1,3-propanedionate; dpm-py = 5-(4-pyridyl)dipyrrin) have been prepared and fully characterized. These two complexes were obtained upon reaction of dpm-py with the (acacpy(2))M homoleptic species (M = Cu(II), Co(II)). In the solid state, the (acacpy(2))Cu(dpm-py) complex behaves as a self-complementary metallatecton and leads to the formation of a 1D coordination polymer (CP) through the coordination of a peripheral pyridyl group to the copper centre. Contrastingly, the octahedral (acacpy(2))Co(dpm-py)(2) complex featuring a coordinatively saturated Co(III) centre crystallizes as an isolated mononuclear species. In order to generate heterometallic CPs, both complexes have been used as metallatectons upon their combination with different silver(I) salts. Upon reaction of (acacpy(2))Cu(dpm-py) with Ag(BF(4)) or Ag(TfO), 2- and 3-D heterometallic networks were obtained, respectively. In both cases, sheet type arrangements resulting from the binding of Ag(+) cations by three peripheral pyridyl groups were observed. These 2D sheets are further interconnected through Ag-π interactions with the pyrrolic rings. Under the same conditions, the combination of (acacpy(2))Co(dpm-py)(2) with Ag(TfO) leads to two networks differing by their connectivity patterns and dimensionality. Interestingly, whereas no Ag-π interactions were observed for the 2D network, a combination of coordination bonding with the pyridyl moieties and Ag-π interactions was detected for the 1D architecture.     

Rapid isolation of plutonium in environmental solid samples using sequential injection anion exchange chromatography followed by detection with inductively coupled plasma mass spectrometry

This paper reports an automated analytical method for rapid determination of plutonium isotopes (²³⁹Pu and ²⁴⁰Pu) in environmental solid extracts. Anion exchange chromatographic columns were incorporated in a sequential injection (SI) system to undertake the automated separation of plutonium from matrix and interfering elements. The analytical results most distinctly demonstrated that the crosslinkage of the anion exchanger is a key parameter controlling the separation efficiency. AG 1-×4 type resin was selected as the most suitable sorbent material for analyte separation. Investigation of column size effect upon the separation efficiency revealed that small-sized (2 mL) columns sufficed to handle up to 50 g of environmental soil samples. Under the optimum conditions, chemical yields of plutonium exceeded 90% and the decontamination factors for uranium, thorium and lead ranged from 10³ to 10⁴. The determination of plutonium isotopes in three standard/certified reference materials (IAEA-375 soil, IAEA-135 sediment and NIST-4359 seaweed) and two reference samples (Irish Sea sediment and Danish soil) revealed a good agreement with reference/certified values. The SI column-separation method is straightforward and less labor intensive as compared with batch-wise anion exchange chromatographic procedures. Besides, the automated method features low consumption of ion-exchanger and reagents for column washing and elution, with the consequent decrease in the generation of acidic waste, thus bearing green chemical credentials.     

Synthesis and Characterization of Antimony(III) Complexes of Thioamides,and Crystal Structure of {[Sb(Imt)2Cl2]2((2‐Imt)}Cl2(Imt=Imidazolidine‐2‐thione)

Antimony(III) complexes of thioamides [thioamides=thiourea (Tu), N,N′‐dimethylthiourea (Dmtu), tetramethylthiourea (Tmtu), imidazolidine‐2‐thione (Imt) and diazinane‐2‐thione (Diaz)] with the general formulae, Sb(thione)_nCl₃ (n=1, 2, 2.5, 3) were prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C) spectroscopic methods. The spectral data of the complexes are consistent with the coordination of the thiones to antimony(III). The crystal structure of one of them, {[Sb(Imt)₂Cl₂]₂(μ₂‐Imt)}Cl₂ ( 1 ), was determined by X‐ray crystallography, which shows that the complex is dinuclear consisting of two [Sb(Imt)₂Cl₂] units bridged by an Imt molecule. In 1 , the antimony atom is bonded to two chlorine atoms, two sulfur atoms of coordinated Imt molecules and one sulfur atom of a bridging Imt molecule. The antimony environment can be considered to be distorted octahedral with one Cl^? ion weakly bound to antimony.     

Supramolecular architectures of streptavidin on biotinylated self-assembled monolayers. Tracking biomolecular reorganization after bioconjugation

In this work we have studied the supramolecular bioconjugation of streptavidin (SAv) on biotinylated self-assembled monolayers. By using the quartz crystal microbalance technique with dissipation we were able to follow in real time the biomolecular reorganization within the film. The overall process could be described as an early stage involving a significant increase in surface coverage followed by another stage where the SAv layer slowly reached the asymptotic coverage. Finally, a reorganization process takes place in the bioconjugated film. These results on the kinetics of biomolecular reorganization can be described in terms of the Lifshitz-Slyozov law. These are the first experimental results demonstrating the complexity and the different time scales involved on the bioconjugation of SAv at solid-liquid interfaces. We consider that these findings could have strong implications on the molecular design of biosensing platforms.     

Gas chromatographic determination of some phenolic compounds in fuels and engine oil after simultaneous derivatization and microextraction

In this study, a simultaneous derivatization/air‐assisted liquid–liquid microextraction method has been developed for sample preparation of some phenolic compounds in fuels and engine oil. Analytes are transferred by back liquid–liquid extraction into NaOH solution and then are derivatized with butyl chloroformate and extracted simultaneously into carbon tetrachloride. The extracted derivatized analytes are analyzed using gas chromatography with flame ionization detection. The effect of extracting solvent type, derivatization agent and extraction solvent volumes, ionic strength of the aqueous solution, number of extraction cycles, etc., on the extraction efficiency is investigated. The calibration graphs are linear in the range of 3–10 000 μg/L. Enhancement factors, enrichment factors, and extraction recoveries are in the ranges of 497 to 1471, 571 to 991, and 60 to 109%, respectively. Detection limits are obtained in the range of 0.8 to 2.0 μg/L. Relative standard deviations for the extraction of each selected phenols are in the ranges of 2–4% for intraday (n = 6) and 3–6% (n = 5) for interday precisions for 200 μg/L. This technique is successfully applied for the extraction, preconcentration, and determination of the selected phenols in gasoline, kerosene, gas oil, and engine oil.     

Structural,morphological and mechanical properties of niobium nitride thin films grown by ion and electron beams emanated from plasma

The influence of variation in plasma deposition parameters on the structural, morphological and mechanical characteristics of the niobium nitride films grown by plasma-emanated ion and electron beams are investigated. Crystallographic investigation made by X-ray diffractometer shows that the film synthesized at 10?cm axial distance with 15 plasma focus shots (PFS) exhibits better crystallinity when compared to the other deposition conditions. Morphological analysis made by scanning electron microscope reveals a definite granular pattern composed of homogeneously distributed nano-spheroids grown as clustered particles for the film synthesized at 10?cm axial distance for 15 PFS. Roughness analysis demonstrates higher rms roughness for the films synthesized at shorter axial distance and by greater number of PFS. Maximum niobium atomic percentage (35.8) and maximum average hardness (19.4?±?0.4?GPa) characterized by energy-dispersive spectroscopy and nano-hardness analyzer respectively are observed for film synthesized at 10?cm axial distance with 15 PFS.     

Effect of ion velocity on SHI-induced mixing in Ti/Bi system

Energetic ion beams are proving to be versatile tools for modification and depth profiling of materials. The energy and ion species are the deciding factor in the ion-beam-induced materials modification. Among the various parameters such as electronic energy loss, fluence and heat of mixing, velocity of the ions used for irradiation plays an important role in mixing at the interface. The present study is carried out to find the effect of the velocity of swift heavy ions on interface mixing of a Ti/Bi bilayer system. Ti/Bi/C was deposited on Si substrate at room temperature by an electron gun in a high-vacuum deposition system. Carbon layer is deposited on top to avoid oxidation of the samples. Eighty mega electron volts Au ions and 100?MeV Ag ions with same value of S_e for Ti are used for the irradiation of samples at the fluences 1?×?10¹³–1?×?10¹⁴ ions/cm². Different techniques like Rutherford backscattering spectroscopy, atomic force microscopy and grazing incidence X-ray diffraction were used to characterize the pristine and irradiated samples. The mixing effect is explained in the framework of the thermal spike model. It has been found that the mixing rate is higher for low-velocity Au ions in comparison to high-velocity Ag ions. The result could be explained as due to less energy deposition in thermal spike by high-velocity ions.